{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30701P02F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30701P02F2200","canonicalUrl":"https://aoctrl.com/schneider/SH30701P02F2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH30701P02F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH30701P02F2200, three phase, 690 W continuous power, 3 N.m holding torque, absolute multiturn SinCos Hiperface encoder, IP65/IP67, smooth shaft, 7.07 in length.","salesMarkdown":"## Motor ratings and what they mean for the drive train The SH30701P02F2200 is a three-phase servo motor with a continuous power rating of 690 W and a nominal speed that depends on the supply voltage: 1500 rpm at 115 V single phase, 3000 rpm at 230 V single phase, 6000 rpm at 400 V three phase, and 7200 rpm at 480 V three phase. That speed range means the motor can be paired with a drive that matches the line voltage and the load speed requirement — the 6000 rpm at 400 V three phase is the typical industrial choice for high-speed spindles or indexing applications. Nominal torque is 1.4 N.m at 115 V and 230 V single phase, dropping to 1.1 N.m at 400 V and 480 V three phase. The continuous stall torque is 1.25 N.m across the 115–480 V three-phase range, which is the torque the motor can hold at zero speed without overheating. The holding brake delivers 3 N.m of holding torque — this is the static torque that keeps the load in position when the drive is off, not the dynamic braking torque during deceleration. For a vertical axis or a tool-change spindle, that brake rating is the number that determines whether the load stays put. ## Encoder, feedback, and integration constraints The motor carries an absolute multiturn SinCos Hiperface encoder. That means the drive gets position and speed feedback with multiturn resolution — no need for a homing cycle on power-up, which saves time on multi-axis machines. The Hiperface protocol is common on Schneider Lexium drives, so the pairing is straightforward. The electrical connection is a straight connector (rotatable right-angled connector also available per the spec), which gives some flexibility in cable routing inside the cabinet. The IP65 motor and IP67 housing ratings per IEC 60034-5 mean the motor body and shaft bushing are protected against dust ingress and water jets — suitable for washdown areas or outdoor installation.","metaTitle":"Schneider Electric SH30701P02F2200 Servo Motor with Brake","metaDescription":"Schneider Electric SH30701P02F2200 servo motor with brake, 690 W continuous power, 3 N.m holding torque, IP65/IP67, absolute multiturn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30701P02F2200","Length":"7.07 in (179.5 mm)","Inertia":"0.11 kg.cm² of brake 0.0 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 70mm, 1 stack, smooth Shaft, SinCos Multiturn 128, Brake, angular, IP65/67","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"1500 rpm 115 V single phase 3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.322 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"12.4 lbf.in (1.4 N.m) 115 V single phase 12.4 lbf.in (1.4 N.m) 230 V single phase 9.7 lbf.in (1.1 N.m) 400 V three phase 9.7 lbf.in (1.1 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.69 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"690 W","Mounting Support":"International standard flange","Sizing reference":"SH30701P","Back emf constant":"46 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"31.0 lbf.in (3.5 N.m) 115...480 V three phase","Stator inductance":"60.25 mH","Stator resistance":"10.4 Ohm","Maximum current Irms":"5.7 A","Nominal output power":"220 W 115 V single phase 440 W 230 V single phase 820 W 400 V three phase 950 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"80 N","Output current 3s peak":"5.7 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"11.06 lbf.in (1.25 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"660 N 1000 rpm 520 N 2000 rpm 460 N 3000 rpm 410 N 4000 rpm 380 N 5000 rpm 360 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.8 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,851.12","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/07c4f477a113cafe8b641de50b1d2ff7.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH30701P02F2200/sh3-servomotor-70mm-1-stack-smooth-shaft-sincos-multiturn-128-brake-angular-ip65-67/"},"ai":{"faq":[{"question":"What is the holding torque of the SH30701P02F2200 brake?","answer":"The holding brake delivers 3 N.m (26.6 lbf.in) of static holding torque. This is the torque that keeps the load in position when the drive is off."},{"question":"What encoder type does the SH30701P02F2200 use?","answer":"It uses an absolute multiturn SinCos Hiperface encoder. This gives position feedback without needing a homing cycle on power-up and is compatible with Lexium drive families."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30701P02F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30701P02F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}