{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30701P0AA3000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30701P0AA3000","canonicalUrl":"https://aoctrl.com/schneider/SH30701P0AA3000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30701P0AA3000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30701P0AA3000, 690 W continuous power, 3000 rpm nominal speed, absolute single-turn Hiperface DSL encoder, IP65, smooth shaft, without holding brake.","salesMarkdown":"## Speed-torque envelope across supply voltages The SH30701P0AA3000: This SH3 frame servo delivers 690 W continuous output at 400 V three-phase and 480 V three-phase, dropping to 370 W on 230 V single-phase supply. Nominal speed is 3000 rpm at 230 V single-phase, 6000 rpm at 400 V three-phase, and 7200 rpm at 480 V three-phase — the speed ceiling follows the bus voltage, not the motor's 8000 rpm mechanical limit. Nominal torque holds at 1.1 N.m on both 400 V and 480 V three-phase supplies, but rises to 1.4 N.m on 230 V single-phase. The torque constant is 0.69 N.m/A at 120 °C copper temperature, so the drive's current loop must deliver at least 2.0 A continuous to reach that torque figure. ## Feedback and mechanical fit The absolute single-turn Hiperface DSL encoder provides position feedback over a digital serial link — no separate encoder cable required, but the drive must support the Hiperface DSL protocol. This is a single-turn device, so the absolute position resets on each power cycle; a multi-turn encoder would be needed for applications that must retain position through a power loss. Mounting uses an international standard flange with a 70 mm (2.8 in) flange size, 60 mm centring collar diameter, and 2.5 mm centring collar depth. The shaft is 11 mm diameter, 23 mm long, smooth (no keyway) — torque transmission relies on a clamping hub or shrink-fit coupling. Maximum radial force is 730 N at 1000 rpm, axial force 80 N. ## Thermal and environmental limits Cooling is by natural convection — no fan, so the continuous torque rating assumes free air circulation around the motor body. The copper winding temperature limit is 130 °C (266 °F); sustained operation above that accelerates insulation ageing and risks a winding short. The motor body carries IP65 protection, but the shaft bushing is only IP54 unless a shaft seal ring is fitted. In washdown environments (food, beverage, chemical processing), the seal ring is required to prevent moisture ingress along the shaft. The electrical connection uses a quick-lock straight connector — verify the mating connector's IP rating matches the installation. ## Electrical parameters for servo tuning Stator resistance is 10.4 Ω and inductance is 42.6 mH — a relatively high inductance that limits current slew rate. The drive's current regulator gains must be tuned for this L/R time constant of about 4.1 ms; default gains tuned for a lower-inductance motor will cause current-loop instability or overshoot.","metaTitle":"Schneider Electric SH30701P0AA3000 Servo Motor, 690 W","metaDescription":"Schneider Electric SH30701P0AA3000 servo motor, 690 W continuous power, 3000 rpm nominal speed, absolute single-turn Hiperface DSL encoder, IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"6.06 in (154 mm)","Category":"US1PC5218359","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"0.9 in (23 mm)","Holding brake":"Without","Nominal speed":"3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.250 kg.cm²","Nominal torque":"12.4 lbf.in (1.4 N.m) 230 V single phase 9.7 lbf.in (1.1 N.m) 400 V three phase 9.7 lbf.in (1.1 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.69 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"690 W","Mounting Support":"International standard flange","Sizing reference":"SH30701P","Back emf constant":"46 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"31.0 lbf.in (3.5 N.m) 115...480 V three phase","Stator inductance":"42.6 mH","Stator resistance":"10.4 Ohm","Maximum current Irms":"5.7 A","Nominal output power":"370 W 230 V single phase 690 W 400 V three phase 690 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"quicklock straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"11.06 lbf.in (1.25 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"730 N 1000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.8 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/dbc32073b434143bac302054b247641a.pdf","sourceUrl":"https://www.se.com/us/en/product/SH30701P0AA3000/sh3-omc-motor-70mm-1-st-ip65-54-smooth-sh-dsl-single-turn-str-conn-m23/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30701P0AA3000/alternatives.json"},"ai":{"faq":[{"question":"What is the closest alternative to SH30701P0AA3000 in the SH3 family?","answer":"The sizing reference SH30701P groups this motor with others sharing the same electromagnetic design and flange size. The key variant difference is the encoder type (absolute single-turn Hiperface DSL here) and the presence or absence of a holding brake — this unit has no brake. A motor with the same sizing reference but a multi-turn encoder or a brake would differ in feedback resolution and vertical-axis holding capability, not in torque or speed ratings."},{"question":"What compliance documentation does Schneider Electric provide for SH30701P0AA3000?","answer":"The motor is designed to IEC 60034-5 for IP protection. Standard Schneider Electric documentation for this series includes a CE declaration of conformity and a datasheet with the full electrical and mechanical specifications. RoHS and REACH compliance information is available from the manufacturer upon request."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30701P0AA3000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30701P0AA3000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}