{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30701P0AA3100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30701P0AA3100","canonicalUrl":"https://aoctrl.com/schneider/SH30701P0AA3100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30701P0AA3100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30701P0AA3100 SH3 servo motor, 690 W continuous power, 3000 rpm nominal speed, absolute single-turn Hiperface DSL encoder, IP65, smooth shaft, three-phase.","salesMarkdown":"## 690 W SH3 servo with Hiperface DSL feedback The Schneider Electric SH30701P0AA3100 is a 690 W SH3-series servo motor delivering 1.4 N.m nominal torque at 3000 rpm on three-phase 400 V supply, with a peak stall torque of 3.5 N.m across the 115...480 V three-phase range. It carries an absolute single-turn Hiperface DSL encoder — a digital feedback protocol that transmits position and temperature data over a single cable pair, reducing wiring complexity compared to incremental or multi-cable resolver systems. ## Speed and torque across supply voltages Nominal speed is 3000 rpm on 230 V single-phase, 6000 rpm on 400 V three-phase, and 7200 rpm on 480 V three-phase — the motor's maximum mechanical speed is 8000 rpm, so the 480 V case runs close to the mechanical limit. Nominal torque drops from 1.4 N.m at 230 V single-phase to 1.1 N.m at both 400 V and 480 V three-phase — the torque constant is 0.69 N.m/A at 120 °C copper temperature, so the lower torque at higher voltage reflects the drive's current limit, not the motor's magnetic capability. Continuous stall torque is 1.25 N.m across the 115...480 V three-phase range at a continuous stall current of 1.8 A, while the maximum RMS current is 5.7 A — the headroom between stall and peak current supports short-duration acceleration or overload cycles. ## Mounting, sealing, and connection The motor uses an international standard flange with a 70 mm flange size and 60 mm centring collar — the 11 mm smooth shaft (no keyway) suits direct coupling to a load via a flexible jaw or bellows coupling, where the clamping hub transmits torque without a key. Electrical connection options include a rotatable right-angled connector and a quicklock straight connector — both are plug-in types that simplify motor swap-out without rewiring the cable gland, saving commissioning time on a multi-axis line.","metaTitle":"Schneider Electric SH30701P0AA3100 Servo Motor, 690 W","metaDescription":"Schneider Electric SH30701P0AA3100 SH3 servo motor, 690 W continuous power, 3000 rpm nominal speed, absolute single-turn Hiperface DSL encoder, IP65, smooth","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"6.06 in (154 mm)","Category":"US1PC5218359","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"0.9 in (23 mm)","Holding brake":"Without","Nominal speed":"3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.250 kg.cm²","Nominal torque":"12.4 lbf.in (1.4 N.m) 230 V single phase 9.7 lbf.in (1.1 N.m) 400 V three phase 9.7 lbf.in (1.1 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.69 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"690 W","Mounting Support":"International standard flange","Sizing reference":"SH30701P","Back emf constant":"46 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"31.0 lbf.in (3.5 N.m) 115...480 V three phase","Stator inductance":"42.6 mH","Stator resistance":"10.4 Ohm","Maximum current Irms":"5.7 A","Nominal output power":"370 W 230 V single phase 690 W 400 V three phase 690 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"quicklock straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"11.06 lbf.in (1.25 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"730 N 1000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.8 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e860ac536537a8c53e8012e412e571bb.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30701P0AA3100/sh3-servomotor-70mm-1-stack-smooth-shaft-singleturn-dsl-18bit-no-brake-onemotorcable-straight-m23-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30701P0AA3100/alternatives.json"},"ai":{"faq":[{"question":"What is SH30701P0AA3100's listed phase?","answer":"The motor is a three-phase design, with nominal performance specified on 230 V single-phase, 400 V three-phase, and 480 V three-phase supplies."},{"question":"What is SH30701P0AA3100's listed length?","answer":"The overall length is 6.06 in (154 mm), excluding the shaft extension of 0.9 in (23 mm)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30701P0AA3100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30701P0AA3100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}