{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30701P0AA4000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30701P0AA4000","canonicalUrl":"https://aoctrl.com/schneider/SH30701P0AA4000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30701P0AA4000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30701P0AA4000, 690 W, 1.4 N.m, 3000-7200 rpm, absolute single-turn Hiperface DSL encoder, IP65, smooth shaft, without brake.","salesMarkdown":"## 690 W SH3 servo — Hiperface DSL feedback, no brake, smooth shaft The SH30701P0AA4000 is an SH3-series servo motor from Schneider Electric delivering 690 W continuous power at 400/480 V three-phase supply, with nominal torque of 1.4 N.m at 230 V single-phase and 1.1 N.m at 400/480 V three-phase. This variant ships without a holding brake and with a smooth shaft, so it is intended for applications where the load holds position at rest (e.g., horizontal belt drives, rotary indexing tables) or where an external brake is fitted. For vertical-axis or safety-hold duty, specify the braked variant. ## Speed-torque envelope by supply voltage Nominal speed is voltage-dependent: 3000 rpm on 230 V single-phase, 6000 rpm on 400 V three-phase, and 7200 rpm on 480 V three-phase. The torque constant is 0.69 N.m/A at 120 °C copper temperature, and the back-EMF constant is 46 V/krpm at 20 °C — both needed for drive tuning and velocity-loop gain calculations. Peak stall torque reaches 3.5 N.m across the 115–480 V three-phase range, while continuous stall torque is 1.25 N.m at 1.8 A continuous stall current. The 5.7 A peak current sets the drive's current-loop headroom for acceleration and deceleration phases. ## Mounting, cooling, and environmental sealing The motor mounts to an international standard flange with a 70 mm flange size and 60 mm centring collar diameter, mating directly with common planetary gearboxes and linear actuators. The 11 mm smooth shaft with 23 mm shaft length accepts keyless clamping hubs or collet-style couplings. Cooling is natural convection — no external fan or forced air required, but the motor must be mounted with adequate free air space around the body to dissipate the 690 W thermal load. The IP65-rated motor body withstands washdown and dust ingress, though the shaft bushing drops to IP54 without the optional shaft seal ring, so a sealed interface is needed for food-and-bev or high-pressure washdown zones. Electrical connection uses a rotatable right-angled connector with quick-lock — the connector body can be oriented in 90° increments after installation, simplifying cable routing in tight cabinets or cable-track systems. The sizing reference SH30701P and device short name SH3 are the family identifiers used in Schneider's selection software and drive-commissioning tools. No official successor or cross-reference is recorded; the SH3 series remains the current-generation compact servo line.","metaTitle":"Schneider SH30701P0AA4000 Servo Motor, 690 W, 1.4 N.m","metaDescription":"Schneider Electric SH30701P0AA4000 SH3 servo motor, 690 W continuous power, 1.4 N.m torque at 230 V, absolute single-turn Hiperface DSL encoder, IP65, smooth","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30701P0AA4000","Length":"6.06 in (154 mm)","Inertia":"0.0 kg.cm² of brake 0.0 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 70mm, 1 stack, smooth Shaft, Singleturn DSL 18bit, no Brake, OneMotorCable angular M23, IP54/65","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"0.9 in (23 mm)","Holding brake":"Without","Nominal speed":"3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.250 kg.cm²","Nominal torque":"12.4 lbf.in (1.4 N.m) 230 V single phase 9.7 lbf.in (1.1 N.m) 400 V three phase 9.7 lbf.in (1.1 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.69 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"690 W","Mounting Support":"International standard flange","Sizing reference":"SH30701P","Back emf constant":"46 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"31.0 lbf.in (3.5 N.m) 115...480 V three phase","Stator inductance":"42.6 mH","Stator resistance":"10.4 Ohm","Maximum current Irms":"5.7 A","Nominal output power":"370 W 230 V single phase 690 W 400 V three phase 690 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"quicklock rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"80 N","Output current 3s peak":"5.7 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"11.06 lbf.in (1.25 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"730 N 1000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.8 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,071.95","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/71f2ab79604ae1132267baa0f291555f.pdf","sourceUrl":"https://www.se.com/us/en/product/SH30701P0AA4000/sh3-servomotor-70mm-1-stack-smooth-shaft-singleturn-dsl-18bit-no-brake-onemotorcable-angular-m23-ip54-65/"},"ai":{"faq":[{"question":"What is the rated torque and speed of SH30701P0AA4000?","answer":"Nominal torque is 1.4 N.m at 230 V single-phase and 1.1 N.m at 400/480 V three-phase. Nominal speed is 3000 rpm at 230 V, 6000 rpm at 400 V, and 7200 rpm at 480 V."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30701P0AA4000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30701P0AA4000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}