{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30701P0AF3000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30701P0AF3000","canonicalUrl":"https://aoctrl.com/schneider/SH30701P0AF3000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30701P0AF3000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30701P0AF3000 SH3 series servo motor with holding brake, 690 W continuous power, 6000 rpm at 400 V three-phase, absolute single-turn Hiperface DSL encoder, IP65, 70 mm flange.","salesMarkdown":"The SH30701P0AF3000 is a 690 W three-phase servo motor from Schneider Electric's SH3 series, delivering 6000 rpm nominal speed at 400 V three-phase supply and 7200 rpm at 480 V three-phase. At 230 V single-phase input it runs at 3000 rpm with 1.4 N.m nominal torque — the speed-torque envelope shifts with the supply voltage, so matching the drive's bus voltage to the motor's rated point is the first check in the BOM. The integrated holding brake delivers 3 N.m holding torque, enough to hold a vertical axis or a conveyor load at standstill without the drive holding current. Brake pull-in power is 7 W — small enough that the brake coil doesn't add meaningful heat to the motor body in a cabinet. Encoder feedback is absolute single-turn Hiperface DSL over a single cable, combining power and feedback in one rotatable right-angle connector or a quicklock straight connector. The single-cable topology simplifies cable management on a moving axis and eliminates one connector failure point. ## Torque and inertia profile for dynamic positioning Peak stall torque reaches 3.5 N.m across the 115-480 V three-phase range, roughly 2.5× the continuous stall torque of 1.25 N.m. This headroom handles acceleration bursts during indexing moves without saturating the magnetic circuit — useful for cycle-time-critical applications where the axis must accelerate a load quickly then settle. Continuous stall current is 1.8 A, and the maximum RMS current is 5.7 A — the drive's continuous and peak current ratings must cover these figures at the operating speed. The 42.6 mH stator inductance and 10.4 Ω stator resistance define the electrical time constant the drive's current regulator sees; a drive with automatic tuning will measure these during commissioning. ## IP65 motor with shaft seal consideration However, the shaft bushing without a shaft seal ring is only IP54, so if the application requires full IP65 at the shaft exit (e.g., direct spray on the shaft face), an external shaft seal ring must be fitted. Natural convection cooling means no fan noise and no filter maintenance, but the continuous torque rating assumes free airflow around the motor body. In a confined cabinet or with heat-radiating components nearby, the 690 W continuous power may need derating — the 130 °C copper hot-spot temperature is the thermal limit. The motor flange is the international standard 70 mm size (2.8 in) with a 60 mm centring collar and 5.5 mm mounting holes — this matches the common IEC frame pattern for 690 W servo motors, so it retrofits into existing machine footprints without adapter plates. The smooth shaft (11 mm diameter, 23 mm length) accepts standard clamping couplings.","metaTitle":"Schneider SH30701P0AF3000 Servo Motor with Brake, 690 W","metaDescription":"Schneider Electric SH30701P0AF3000 servo motor with brake, 690 W continuous power, 6000 rpm at 400 V three-phase, absolute Hiperface DSL encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"7.09 in (180 mm)","Category":"US1PC5218359","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.322 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"12.4 lbf.in (1.4 N.m) 230 V single phase 9.7 lbf.in (1.1 N.m) 400 V three phase 9.7 lbf.in (1.1 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.69 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"690 W","Mounting Support":"International standard flange","Sizing reference":"SH30701P","Back emf constant":"46 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"31.0 lbf.in (3.5 N.m) 115...480 V three phase","Stator inductance":"42.6 mH","Stator resistance":"10.4 Ohm","Brake pull-in power":"7 W","Maximum current Irms":"5.7 A","Nominal output power":"370 W 230 V single phase 690 W 400 V three phase 690 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"quicklock straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"11.06 lbf.in (1.25 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"730 N 1000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.8 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/70521d039d783e81216388729d606cb8.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30701P0AF3000/sh3-servomotor-70mm-1-stack-smooth-shaft-singleturn-dsl-18bit-brake-onemotorcable-straight-m23-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30701P0AF3000/alternatives.json"},"ai":{"faq":[{"question":"What encoder type does the SH30701P0AF3000 use?","answer":"It uses an absolute single-turn Hiperface DSL encoder, which combines position feedback and power over a single cable. This eliminates a separate feedback cable and reduces connection points on moving axes."},{"question":"What supply voltages and speeds does this motor support?","answer":"At 230 V single-phase input it runs at 3000 rpm with 1.4 N.m nominal torque. At 400 V three-phase it delivers 6000 rpm with 1.1 N.m nominal torque, and at 480 V three-phase it reaches 7200 rpm with the same 1.1 N.m torque. The peak stall torque of 3.5 N.m is available across the 115-480 V three-phase range."},{"question":"What is the holding torque of the integrated brake?","answer":"The holding brake provides 3 N.m (26.6 lbf.in) holding torque with a 7 W pull-in power. This is sufficient to hold vertical loads or conveyor sections at standstill without the drive supplying holding current."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30701P0AF3000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30701P0AF3000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}