{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30701P0AF3100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30701P0AF3100","canonicalUrl":"https://aoctrl.com/schneider/SH30701P0AF3100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30701P0AF3100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH30701P0AF3100, three-phase, 690 W nominal output at 400/480 V, 7200 rpm, absolute single-turn Hiperface DSL encoder, IP65, smooth shaft, 70 mm flange.","salesMarkdown":"The SH30701P0AF3100 is a three-phase servo motor from the SH3 family, delivering 690 W nominal output power at 400 V or 480 V three-phase supply, with a peak speed of 7200 rpm on 480 V. On a 230 V single-phase line it produces 370 W and tops out at 3000 rpm — so the supply voltage directly governs both the power and speed envelope available to the axis. The integrated holding brake holds 3 N·m (26.6 lbf·in) with 7 W pull-in power. That means a vertical or inclined axis stays put when power is removed, without needing an external brake resistor or a separate mechanical brake — the brake is sized to hold the rated continuous stall torque (1.25 N·m) plus margin. The absolute single-turn Hiperface DSL encoder eliminates the need for a homing sequence on every power-up — the position is known immediately. This matters for applications where the machine must resume operation after a power cycle without re-referencing, such as pick-and-place or rotary indexing stations. ## Torque, inertia, and thermal limits — sizing the axis correctly Nominal torque is 1.4 N·m on 230 V single-phase, dropping to 1.1 N·m on 400/480 V three-phase — the motor delivers higher torque at lower voltage because the current limit is the same but the voltage-dependent speed is lower. Peak stall torque reaches 3.5 N·m across the 115–480 V three-phase range, giving a 3:1 peak-to-continuous ratio for acceleration bursts. The motor is cooled by natural convection only — no fan or forced air. Continuous stall current is 1.8 A, and the maximum continuous current (Irms) is 5.7 A. The thermal limit at the copper winding is 130 °C (266 °F), so the duty cycle must stay within the continuous torque curve unless the application allows the winding to cool between cycles. ## IP65, flange mount, and shaft — integration constraints The motor and shaft bushing are rated IP65 per IEC 60034-5, meaning the housing is dust-tight and protected against low-pressure water jets. This suits washdown environments in food processing, packaging, or outdoor machine stations — but the connector must be mated with the matching IP65-rated cable assembly to maintain the seal. Mounting is via an international standard flange with a 70 mm flange size and a 60 mm centring collar diameter. The four mounting holes are 5.5 mm diameter on a bolt circle matching the 70 mm flange pattern — standard for IEC frame sizes. The smooth shaft (11 mm diameter, 23 mm long) accepts a clamping-type coupling; no keyway is provided. Maximum radial force at the shaft is 730 N at 1000 rpm, derating with speed. Maximum axial force is 80 N. These limits govern the coupling selection and the overhung load from a belt or gear — exceeding them shortens bearing life or causes shaft deflection that the encoder reads as position error.","metaTitle":"Schneider Electric SH30701P0AF3100 Servo Motor with Brake","metaDescription":"Schneider Electric SH30701P0AF3100 servo motor with brake, 690 W continuous power at 400/480 V three-phase, 7200 rpm max speed, absolute single-turn Hiperface","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30701P0AF3100","Length":"7.09 in (180 mm)","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 70mm, 1 stack, smooth Shaft, Singleturn DSL 18bit, Brake, OneMotorCable straight M23, IP65/65","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.322 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"12.4 lbf.in (1.4 N.m) 230 V single phase 9.7 lbf.in (1.1 N.m) 400 V three phase 9.7 lbf.in (1.1 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.69 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"690 W","Mounting Support":"International standard flange","Sizing reference":"SH30701P","Back emf constant":"46 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"31.0 lbf.in (3.5 N.m) 115...480 V three phase","Stator inductance":"42.6 mH","Stator resistance":"10.4 Ohm","Brake pull-in power":"7 W","Maximum current Irms":"5.7 A","Nominal output power":"370 W 230 V single phase 690 W 400 V three phase 690 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"quicklock straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"11.06 lbf.in (1.25 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"730 N 1000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.8 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/dd3ee45903187a86cb37643921524ea0.pdf","sourceUrl":"https://www.se.com/be/en/product/SH30701P0AF3100/sh3-servomotor-70mm-1-stack-smooth-shaft-singleturn-dsl-18bit-brake-onemotorcable-straight-m23-ip65-65/"},"ai":{"faq":[{"question":"What is the maximum speed of SH30701P0AF3100 on different supply voltages?","answer":"On 230 V single-phase the maximum speed is 3000 rpm. On 400 V three-phase it reaches 6000 rpm, and on 480 V three-phase it reaches 7200 rpm. The nominal power also varies: 370 W on 230 V single-phase, 690 W on 400 V or 480 V three-phase."},{"question":"What encoder type does SH30701P0AF3100 use?","answer":"It uses an absolute single-turn Hiperface DSL encoder. This means the motor reports its absolute position within one revolution on power-up, eliminating the need for a homing sequence. The DSL protocol runs over a two-wire interface shared with the motor power cable."},{"question":"What is the holding torque of the brake on SH30701P0AF3100?","answer":"The integrated holding brake provides 3 N·m (26.6 lbf·in) of holding torque with a pull-in power of 7 W. This is sufficient to hold the rated continuous stall torque of 1.25 N·m plus safety margin on a vertical axis."},{"question":"What IP rating does SH30701P0AF3100 have?","answer":"The motor and shaft bushing are rated IP65 per IEC 60034-5 — dust-tight and protected against low-pressure water jets. The connector must be mated with an IP65-rated cable assembly to maintain the seal."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30701P0AF3100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30701P0AF3100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}