{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30701P0BF3100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30701P0BF3100","canonicalUrl":"https://aoctrl.com/schneider/SH30701P0BF3100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30701P0BF3100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30701P0BF3100 SH3 servo motor with brake, 690 W, 3000 rpm, 1.4 N.m, IP65, Absolute multiturn Hiperface DSL encoder.","salesMarkdown":"## 690 W servo with brake — SH3 frame, 70 mm flange The SH30701P0BF3100 is a 690 W three-phase servo motor from Schneider Electric's SH3 series, built on a 70 mm flange (2.8 in) with an international standard mounting pattern. It delivers 1.4 N.m nominal torque at 400 V three-phase and 1.1 N.m at 480 V, with a peak stall torque of 3.5 N.m across the 115...480 V range — enough to handle moderate inertial loads and short-duration overloads in positioning axes. The integrated holding brake (3 N.m holding torque) locks the rotor when power is removed, making this motor a natural fit for vertical-axis applications where the load must not drift on power loss. ## Absolute multiturn Hiperface DSL — single-cable feedback Multiturn means the motor remembers its absolute position across power cycles — no homing sequence after a restart, which saves minutes per startup on multi-axis lines. ## IP65 rating — washdown-ready, but check the shaft seal Both the motor body and the shaft bushing carry IP65 per IEC 60034-5, so the motor handles hose-down from any direction — a common requirement on packaging, food, and beverage lines. The smooth shaft has no keyway, which means the coupling or pulley must clamp onto the 11 mm diameter (0.4 in) shaft. No keyway also means no stress riser, but the torque transfer relies entirely on the clamping force of the mating component. No stock-holding claim; sourced per RFQ through authorized distribution channels.","metaTitle":"Schneider Electric SH30701P0BF3100 Servo Motor with Brake","metaDescription":"Schneider Electric SH30701P0BF3100 servo motor with brake, 690 W, 3000 rpm, IP65, Absolute multiturn Hiperface DSL encoder. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30701P0BF3100","Length":"7.09 in (180 mm)","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 OMC motor 70mm 1 st. IP65/65 smooth sh. DSL multi turn str. conn.M23 brake","Encoder type":"Absolute multiturn Hiperface DSL","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.322 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"12.4 lbf.in (1.4 N.m) 230 V single phase 9.7 lbf.in (1.1 N.m) 400 V three phase 9.7 lbf.in (1.1 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.69 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"690 W","Mounting Support":"International standard flange","Sizing reference":"SH30701P","Back emf constant":"46 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"31.0 lbf.in (3.5 N.m) 115...480 V three phase","Stator inductance":"42.6 mH","Stator resistance":"10.4 Ohm","Brake pull-in power":"7 W","Maximum current Irms":"5.7 A","Nominal output power":"370 W 230 V single phase 690 W 400 V three phase 690 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"quicklock straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"160 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"11.06 lbf.in (1.25 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"900 N 1000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.8 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn x 4096 turns","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/cc00b7af1a09b3d7c4651d72f3f9c7ad.pdf","sourceUrl":"https://www.se.com/us/en/product/SH30701P0BF3100/sh3-omc-motor-70mm-1-st-ip65-65-smooth-sh-dsl-multi-turn-str-conn-m23-brake/"},"ai":{"faq":[{"question":"How can I order SH30701P0BF3100 and get a quote?","answer":"No stock-holding claim — each order is quoted from authorized distribution."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30701P0BF3100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30701P0BF3100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}