{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30701P0BF4100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30701P0BF4100","canonicalUrl":"https://aoctrl.com/schneider/SH30701P0BF4100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30701P0BF4100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30701P0BF4100 servo motor with brake, 690 W continuous power, 3-phase, IP65, absolute multiturn Hiperface DSL encoder, 70 mm flange, smooth shaft.","salesMarkdown":"## Frame and mounting — 70 mm flange, 180 mm body The SH30701P0BF4100 is a 70 mm flange-size servo motor with a 180 mm body length, mounting to standard international flange patterns per the SH3 series sizing reference. The smooth 11 mm shaft (23 mm engagement length) accepts a clamping hub or collet coupling — no keyway, so the coupling bore must match the shaft diameter precisely. Two connector options are supplied: a straight connector and a quicklock rotatable right-angled connector, letting the cable exit orientation be adjusted in the field without re-termination. ## Speed and torque across supply voltages This motor delivers different speed and torque depending on the supply: at 230 V single-phase it runs 3000 rpm with 1.4 N.m nominal torque; at 400 V three-phase it reaches 6000 rpm at 1.1 N.m; at 480 V three-phase it hits 7200 rpm at 1.1 N.m. Continuous power is 690 W at 400/480 V three-phase, dropping to 370 W at 230 V single-phase — the three-phase supply is where this motor delivers its full rated output. Continuous stall torque is 1.25 N.m across the 115-480 V three-phase range, with a peak stall torque of 3.5 N.m for short-term acceleration or overload events. ## Encoder and feedback — absolute multiturn Hiperface DSL This encoder protocol is native to Schneider Lexium drives and many third-party servo drives supporting Hiperface DSL — confirm drive compatibility before specifying. ## Brake and mechanical limits The integrated holding brake delivers 3 N.m holding torque and requires 7 W pull-in power to release — the brake holds the vertical axis at power-off without external mechanical locks. Bearing load limits are 900 N radial force at 1000 rpm and 160 N axial force — stay within these for belt/pulley or direct-coupled loads to avoid premature bearing wear. ## Thermal and environmental rating Cooling is by natural convection — no integrated fan, so the motor relies on the mounting surface and ambient airflow for heat dissipation; derate if enclosed in a confined space. Stator resistance is 10.4 Ohm and stator inductance is 21.3 mH — these influence the drive's current-loop tuning and I²R thermal losses at sustained load.","metaTitle":"Schneider Electric SH30701P0BF4100 Servo Motor with Brake","metaDescription":"Schneider Electric SH30701P0BF4100 servo motor with brake, 690 W, 3-phase, IP65, Hiperface DSL encoder. Active production, quoted to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30701P0BF4100","Length":"7.09 in (180 mm)","Inertia":"0.072 kg.cm² of brake 0.25 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 70mm, 1 stack, smooth Shaft, Multiturn DSL 18bit, Brake, OneMotorCable angular M23, IP65/65","Encoder type":"Absolute multiturn Hiperface DSL","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.322 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"12.4 lbf.in (1.4 N.m) 230 V single phase 9.7 lbf.in (1.1 N.m) 400 V three phase 9.7 lbf.in (1.1 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.69 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"690 W","Mounting Support":"International standard flange","Sizing reference":"SH30701P","Back emf constant":"46 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"31.0 lbf.in (3.5 N.m) 115...480 V three phase","Stator inductance":"21.3 mH","Stator resistance":"10.4 Ohm","Brake pull-in power":"7 W","Maximum current Irms":"5.7 A","Nominal output power":"370 W 230 V single phase 690 W 400 V three phase 690 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"quicklock rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"160 N","Output current 3s peak":"5.7 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"11.06 lbf.in (1.25 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"900 N 1000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.8 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn x 4096 turns","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,702.62","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/feb0b7fde15ce05f999bdfe3d9b4037b.pdf","sourceUrl":"https://www.se.com/us/en/product/SH30701P0BF4100/sh3-servomotor-70mm-1-stack-smooth-shaft-multiturn-dsl-18bit-brake-onemotorcable-angular-m23-ip65-65/"},"ai":{"faq":[{"question":"What is the SH30701P0BF4100's nominal speed at 400 V three-phase?","answer":"At 400 V three-phase the nominal speed is 6000 rpm; at 480 V three-phase it reaches 7200 rpm; at 230 V single-phase it runs 3000 rpm."},{"question":"What encoder type does the SH30701P0BF4100 use?","answer":"It uses an absolute multiturn Hiperface DSL encoder, providing position feedback over a single cable without battery backup for multiturn position."},{"question":"What is the holding torque of the brake on the SH30701P0BF4100?","answer":"The integrated holding brake provides 3 N.m holding torque and requires 7 W pull-in power to release."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30701P0BF4100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30701P0BF4100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}