{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30701P11F2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30701P11F2100","canonicalUrl":"https://aoctrl.com/schneider/SH30701P11F2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30701P11F2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH30701P11F2100, three-phase, 690 W continuous power, IP65, absolute single-turn SinCos Hiperface encoder, 70 mm flange, 11 mm shaft with parallel key.","salesMarkdown":"## Motor specs that decide the fit The SH30701P11F2100 is a three-phase servo motor from Schneider Electric's SH3 family, rated 690 W continuous power with natural convection cooling. It delivers nominal torque of 12.4 lbf.in (1.4 N.m) on single-phase 115 V or 230 V supply, and 9.7 lbf.in (1.1 N.m) on three-phase 400 V or 480 V supply — the torque curve shifts with the voltage you feed it. Nominal speed ranges from 1500 rpm on 115 V single-phase up to 7200 rpm on 480 V three-phase, so the same motor body covers a wide speed window depending on the drive and supply you pair it with. Peak stall torque is 31.0 lbf.in (3.5 N.m) across the 115–480 V three-phase range — that's the short-duration torque for acceleration or overcoming load inertia during a move profile. ## Built-in holding brake and encoder feedback This motor ships with a holding brake — holding torque 26.6 lbf.in (3 N.m) — so it holds the load position when power is removed, which saves adding an external brake resistor or mechanical lock on the axis. Feedback comes from an absolute single-turn SinCos Hiperface encoder — single-turn means it reports position within one revolution at power-up without a homing cycle, and the SinCos analog track gives high-resolution interpolation for the drive. ## IP65 rating and mechanical mounting Both the motor body and the shaft bushing carry IP65 per IEC 60034-5 — the housing seals against dust ingress and low-pressure water jets, so it's suited for washdown areas or dusty production lines without a secondary cover. The motor flange is 70 mm (2.8 in) with a centring collar depth of 0.10 in (2.5 mm) and mounting holes on a 5.5 mm diameter — this is the standard IEC flange pattern that mates with most planetary gearboxes and linear actuators in the same frame size. Shaft diameter is 0.4 in (11 mm) with a parallel key and key width 0.2 in (4 mm) — the key transmits torque to the load coupling; the shaft length of 0.9 in (23 mm) gives enough engagement for a standard clamping hub. No official successor or cross-reference is listed — this is the active variant in the SH3 frame size, so the BOM line stays stable as long as the machine design uses this flange and encoder type.","metaTitle":"Schneider Electric SH30701P11F2100 Servo Motor with Brake","metaDescription":"Schneider Electric SH30701P11F2100 SH3 servo motor with holding brake, 690 W continuous power, IP65, absolute single-turn encoder. Three-phase, 70 mm flange.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30701P11F2100","Length":"7.07 in (179.5 mm)","Inertia":"0.11 kg.cm² of brake 0.0 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (4 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 70mm, 1 stack, keyed Shaft, SinCos Singleturn 128, Brake, angular, IP65/65","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"1500 rpm 115 V single phase 3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.322 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"12.4 lbf.in (1.4 N.m) 115 V single phase 12.4 lbf.in (1.4 N.m) 230 V single phase 9.7 lbf.in (1.1 N.m) 400 V three phase 9.7 lbf.in (1.1 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.69 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"690 W","Mounting Support":"International standard flange","Sizing reference":"SH30701P","Back emf constant":"46 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"31.0 lbf.in (3.5 N.m) 115...480 V three phase","Stator inductance":"60.25 mH","Stator resistance":"10.4 Ohm","Maximum current Irms":"5.7 A","Nominal output power":"220 W 115 V single phase 440 W 230 V single phase 820 W 400 V three phase 950 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"80 N","Output current 3s peak":"5.7 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"11.06 lbf.in (1.25 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"660 N 1000 rpm 520 N 2000 rpm 460 N 3000 rpm 410 N 4000 rpm 380 N 5000 rpm 360 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.8 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/30887e438970d88214618677a69add4a.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30701P11F2100/sh3-servomotor-70mm-1-stack-keyed-shaft-sincos-singleturn-128-brake-angular-ip65-65/"},"ai":{"faq":[{"question":"What is the holding torque of the brake on SH30701P11F2100?","answer":"The holding brake delivers 26.6 lbf.in (3 N.m) of holding torque — enough to hold a vertical axis or tool changer in position when the drive is disabled."},{"question":"What encoder type does this servo motor use?","answer":"It uses an absolute single-turn SinCos Hiperface encoder — single-turn means absolute position within one revolution at power-up, and the SinCos signals provide high-resolution feedback for the drive's commutation and velocity loop."},{"question":"What is the IP rating of SH30701P11F2100?","answer":"IP65 on both the motor body and the shaft bushing per IEC 60034-5 — sealed against dust and low-pressure water jets, suitable for washdown or dusty environments."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30701P11F2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30701P11F2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}