{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30701P1AA3000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30701P1AA3000","canonicalUrl":"https://aoctrl.com/schneider/SH30701P1AA3000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30701P1AA3000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30701P1AA3000, 690 W, 6000 rpm, three-phase, absolute single-turn Hiperface DSL encoder, IP65, without brake, 70 mm flange.","salesMarkdown":"## 690 W servo with Hiperface DSL — single-cable feedback The SH30701P1AA3000 is a 690 W three-phase servo motor from the SH3 series, delivering 6000 rpm nominal at 400 V three-phase supply and 7200 rpm at 480 V three-phase. On single-phase 230 V input, nominal speed drops to 3000 rpm and output power to 370 W — the supply configuration directly sets the performance envelope. The absolute single-turn Hiperface DSL encoder eliminates a separate feedback cable — power and position data share one quicklock straight connector. This reduces cable cost and cabinet entry points, but the single-cable constraint means the drive must support Hiperface DSL protocol. No holding brake is fitted on this variant. The load must hold position without brake engagement, or an external brake must be added. For applications requiring a brake, order the braked variant of the SH3 frame. ## Torque and inertia — sizing the acceleration profile Continuous stall torque is 1.25 Nm across the 115-480 V three-phase range, with a continuous stall current of 1.8 A. Peak stall torque reaches 3.5 Nm — nearly 3× the continuous rating — for short-duration acceleration or deceleration events. Torque constant is 0.69 Nm/A at 120 °C copper temperature. The back EMF constant is 46 V/krpm at 20 °C — this sets the voltage ceiling at high speeds; at 6000 rpm the back EMF reaches 276 V, leaving headroom on a 400 V DC bus. ## IP65 body, IP54 shaft bushing — washdown limits The motor body is rated IP65 per IEC 60034-5, suitable for washdown environments. However, the shaft bushing without a shaft seal ring drops to IP54 — moisture can ingress along the shaft if directly sprayed. Adding an optional shaft seal ring restores IP65 at the bushing. Natural convection cooling means no fan or compressed air is required. The 690 W continuous rating assumes free airflow around the motor body; derating applies if mounted in a confined space or near heat sources. Maximum radial force is 730 N at 1000 rpm, and maximum axial force is 80 N. Belt-driven loads must respect these limits — overhung loads above these values risk bearing life. ## Active production — sourcing and documentation The motor mounts on an international standard flange with 70 mm pilot diameter and 5.5 mm mounting holes. The shaft is 11 mm diameter with a parallel key, 23 mm shaft length, and 4 mm key width — confirm coupling dimensions against these values.","metaTitle":"Schneider Electric SH30701P1AA3000 Servo Motor, 690 W","metaDescription":"Schneider Electric SH30701P1AA3000 SH3 servo motor, 690 W, 6000 rpm at 400 V three phase, absolute single-turn Hiperface DSL encoder, IP65, no brake.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"6.06 in (154 mm)","Category":"US1PC5218359","Key width":"0.2 in (4 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"0.9 in (23 mm)","Holding brake":"Without","Nominal speed":"3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.250 kg.cm²","Nominal torque":"12.4 lbf.in (1.4 N.m) 230 V single phase 9.7 lbf.in (1.1 N.m) 400 V three phase 9.7 lbf.in (1.1 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.69 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"690 W","Mounting Support":"International standard flange","Sizing reference":"SH30701P","Back emf constant":"46 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"31.0 lbf.in (3.5 N.m) 115...480 V three phase","Stator inductance":"42.6 mH","Stator resistance":"10.4 Ohm","Maximum current Irms":"5.7 A","Nominal output power":"370 W 230 V single phase 690 W 400 V three phase 690 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"quicklock straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"11.06 lbf.in (1.25 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"730 N 1000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.8 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/13471fc3109b1f3c190f0e280112f409.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30701P1AA3000/sh3-servomotor-70mm-1-stack-keyed-shaft-singleturn-dsl-18bit-no-brake-onemotorcable-straight-m23-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30701P1AA3000/alternatives.json"},"ai":{"faq":[{"question":"What compliance documentation does Schneider Electric provide for SH30701P1AA3000?","answer":"The motor carries IP65/IP54 ingress protection per IEC 60034-5. Standard Schneider documentation includes the product datasheet and installation manual. Specific RoHS, REACH, and UL declarations should be requested at RFQ time — these are not listed in the available spec record."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30701P1AA3000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30701P1AA3000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}