{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30701P1AA3100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30701P1AA3100","canonicalUrl":"https://aoctrl.com/schneider/SH30701P1AA3100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30701P1AA3100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30701P1AA3100 SH3 servo motor, three phase, 690 W continuous power, 6000 rpm nominal at 400 V, IP65, absolute single-turn Hiperface DSL encoder, without brake, 70 mm flange.","salesMarkdown":"## Active production — what that means for procurement The SH30701P1AA3100: Sourced through authorized distribution channels against an RFQ. ## Speed-torque envelope across supply voltages Nominal speed depends on the supply: 3000 rpm on 230 V single phase, 6000 rpm on 400 V three phase, and 7200 rpm on 480 V three phase. Maximum mechanical speed is 8000 rpm, so the 480 V case runs close to the ceiling. Nominal torque also shifts with supply: 1.4 N.m at 230 V single phase, dropping to 1.1 N.m at both 400 V and 480 V three phase. The continuous power rating is 690 W at 400/480 V three phase; at 230 V single phase it's 370 W. Continuous stall current is 1.8 A; maximum RMS current is 5.7 A. ## Encoder, feedback, and connection Fitted with an absolute single-turn Hiperface DSL encoder — this is a digital serial-link feedback protocol that carries position and temperature data over a single cable pair, simplifying the motor cable assembly compared to resolver or incremental encoder wiring. Electrical connection is via a rotatable right-angled connector and a quicklock straight connector. The rotatable design helps in tight cabinet layouts where cable exit direction needs adjustment after mounting. ## Mounting and environmental rating Mounts on an international standard flange with a 70 mm flange size and 60 mm centring collar diameter. The centring collar depth is 2.5 mm; mounting holes are 5.5 mm diameter on the flange face. IP65 protection on both the motor body and the shaft bushing per IEC 60034-5 — suitable for washdown environments and dusty factory floors. Cooling is by natural convection, so no external fan or coolant circuit is needed. Rated for 80 N maximum axial force and 730 N maximum radial force at 1000 rpm. The shaft is 11 mm diameter with a parallel key, 23 mm shaft length, and a 4 mm key width. ## Electrical parameters and thermal limits Stator resistance is 10.4 Ohm and stator inductance is 42.6 mH — these set the electrical time constant and influence the servo drive's tuning gains. Torque constant is 0.69 N.m/A at 120°C copper temperature; back EMF constant is 46 V/krpm at 20°C. Hot-spot copper temperature is rated at 130°C — the winding insulation class supports continuous operation at that temperature without accelerated aging.","metaTitle":"Schneider Electric SH30701P1AA3100 Servo Motor, 690 W","metaDescription":"Schneider Electric SH30701P1AA3100 SH3 servo motor, 690 W continuous power, 6000 rpm at 400 V three phase, IP65, Hiperface DSL encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"6.06 in (154 mm)","Category":"US1PC5218359","Key width":"0.2 in (4 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"0.9 in (23 mm)","Holding brake":"Without","Nominal speed":"3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.250 kg.cm²","Nominal torque":"12.4 lbf.in (1.4 N.m) 230 V single phase 9.7 lbf.in (1.1 N.m) 400 V three phase 9.7 lbf.in (1.1 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.69 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"690 W","Mounting Support":"International standard flange","Sizing reference":"SH30701P","Back emf constant":"46 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"31.0 lbf.in (3.5 N.m) 115...480 V three phase","Stator inductance":"42.6 mH","Stator resistance":"10.4 Ohm","Maximum current Irms":"5.7 A","Nominal output power":"370 W 230 V single phase 690 W 400 V three phase 690 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"quicklock straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"11.06 lbf.in (1.25 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"730 N 1000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.8 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e2d071019f06d6583c668db17c0b32ef.pdf","sourceUrl":"https://www.se.com/us/en/product/SH30701P1AA3100/sh3-omc-motor-70mm-1-st-ip65-65-keyed-sh-dsl-single-turn-str-conn-m23/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30701P1AA3100/alternatives.json"},"ai":{"faq":[{"question":"What is the nominal speed of SH30701P1AA3100 at different supply voltages?","answer":"Nominal speed is 3000 rpm on 230 V single phase, 6000 rpm on 400 V three phase, and 7200 rpm on 480 V three phase. Maximum mechanical speed is 8000 rpm."},{"question":"Does SH30701P1AA3100 include a holding brake?","answer":"No. This variant is specified 'without' holding brake. If a brake is needed for vertical-axis holding, a separate brake option or external brake resistor would be required."},{"question":"What encoder type does SH30701P1AA3100 use?","answer":"It uses an absolute single-turn Hiperface DSL encoder. This is a digital feedback protocol that communicates position and temperature over a single cable pair, compatible with Schneider's Lexium servo drives and other Hiperface DSL-capable drives."},{"question":"What is the IP rating of SH30701P1AA3100?","answer":"IP65 on both the motor body and the shaft bushing, conforming to IEC 60034-5. This means it is dust-tight and protected against water jets from any direction."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30701P1AA3100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30701P1AA3100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}