{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30701P1AA4000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30701P1AA4000","canonicalUrl":"https://aoctrl.com/schneider/SH30701P1AA4000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30701P1AA4000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30701P1AA4000, 690 W continuous power, 3000 rpm nominal speed, 1.4 N.m nominal torque, IP65, absolute single-turn Hiperface DSL encoder, three phase.","salesMarkdown":"## Speed vs voltage — what the numbers mean for your drive bus The SH30701P1AA4000 delivers 3000 rpm nominal speed on a 230 V single-phase supply, 6000 rpm on 400 V three-phase, and 7200 rpm on 480 V three-phase — the top speed is a direct function of the DC bus voltage available from the drive. Nominal torque drops from 1.4 N.m at 230 V single phase to 1.1 N.m at both 400 V and 480 V three phase, so the torque-speed envelope shifts with the supply rail. Continuous power is 690 W, with the nominal output power matching that figure on three-phase supplies; on 230 V single phase it derates to 370 W. ## Encoder feedback and mechanical fit The absolute single-turn Hiperface DSL encoder gives position feedback over a digital serial link — no separate battery backup needed for position retention on power cycle, and the single cable carries both power and feedback. Motor flange size is 70 mm with a 60 mm centring collar and 2.5 mm collar depth, matching the standard IEC frame pattern for this power class. Shaft diameter is 11 mm with a parallel key and 23 mm shaft length — confirm the coupling bore and keyway dimensions before the build. ## IP rating and connector — washdown-ready but watch the shaft seal The motor body is IP65 per IEC 60034-5, so it handles hose-down and dust ingress in food or wet environments. The shaft bushing without the shaft seal ring drops to IP54 — if the application sees direct spray on the shaft exit, add the seal ring or shield the coupling area. Electrical connection is via a rotatable right-angle connector with quicklock — the connector orientation can be adjusted in 90° increments to route the cable cleanly in tight cabinets. ## Torque capability — peak vs continuous Maximum current Irms is 5.7 A, with the same figure for the 3 s peak output — the drive must be sized to supply this peak without dropping into current limit during acceleration or reversing moves. Stator resistance is 10.4 Ohm and inductance is 21.3 mH — the electrical time constant (L/R) is about 2 ms, which sets a lower bound on the current-loop bandwidth the drive can achieve.","metaTitle":"Schneider Electric SH30701P1AA4000 Servo Motor, 690 W","metaDescription":"Schneider Electric SH30701P1AA4000 servo motor, 690 W continuous power, 3000 rpm at 230 V single phase, IP65. Absolute single-turn Hiperface DSL encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30701P1AA4000","Length":"6.06 in (154 mm)","Inertia":"0.0 kg.cm² of brake 0.25 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (4 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 70mm, 1 stack, keyed Shaft, Singleturn DSL 18bit, no Brake, OneMotorCable angular M23, IP54/65","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"0.9 in (23 mm)","Holding brake":"Without","Nominal speed":"3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.250 kg.cm²","Nominal torque":"12.4 lbf.in (1.4 N.m) 230 V single phase 9.7 lbf.in (1.1 N.m) 400 V three phase 9.7 lbf.in (1.1 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.69 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"690 W","Mounting Support":"International standard flange","Sizing reference":"SH30701P","Back emf constant":"46 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"31.0 lbf.in (3.5 N.m) 115...480 V three phase","Stator inductance":"21.3 mH","Stator resistance":"10.4 Ohm","Maximum current Irms":"5.7 A","Nominal output power":"370 W 230 V single phase 690 W 400 V three phase 690 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"quicklock rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"80 N","Output current 3s peak":"5.7 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"11.06 lbf.in (1.25 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"730 N 1000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.8 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,121.04","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/11ad4a4c4561d0a245b9afce7e69b204.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30701P1AA4000/sh3-servomotor-70mm-1-stack-keyed-shaft-singleturn-dsl-18bit-no-brake-onemotorcable-angular-m23-ip54-65/"},"ai":{"faq":[{"question":"What is SH30701P1AA4000's listed phase?","answer":"It is a three-phase motor, but it can run on 230 V single-phase input at reduced speed and torque (3000 rpm, 1.4 N.m, 370 W)."},{"question":"What is SH30701P1AA4000's listed length?","answer":"The overall length is 154 mm (6.06 in), measured from the mounting flange face to the rear of the motor housing."},{"question":"What compliance documentation does Schneider Electric provide for SH30701P1AA4000?","answer":"The motor carries IP65/IP54 ingress protection per IEC 60034-5. Standard Schneider documentation includes the CE declaration of conformity and the product data sheet with electrical and mechanical drawings."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30701P1AA4000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30701P1AA4000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}