{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30701P1AF3000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30701P1AF3000","canonicalUrl":"https://aoctrl.com/schneider/SH30701P1AF3000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30701P1AF3000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with holding brake, SH30701P1AF3000, three-phase, 690 W continuous power, 3 N.m holding torque, absolute single-turn Hiperface DSL encoder, IP65, 70 mm flange.","salesMarkdown":"## Motor identity and key fit checks The SH30701P1AF3000 is a Schneider Electric SH3-series servo motor with an integral holding brake, designed for three-phase supply. The brake is built in — no external brake resistor or separate mechanical brake to source, which keeps the kit complete for vertical-axis or safety-hold applications where the load must stay put when power is removed. The holding torque is 3 N.m (26.6 lbf.in), so it holds a vertical load of that torque without back-driving through the gearbox. The brake pull-in power is 7 W — a modest draw that the drive's brake control output can handle without an external relay in most cases. ## Power, speed, and torque across supply voltages Continuous output power is voltage-dependent: 690 W at 400 V three-phase or 480 V three-phase, and 370 W at 230 V single-phase. The nominal speed also shifts with the supply — 3000 rpm at 230 V single-phase, 6000 rpm at 400 V three-phase, and 7200 rpm at 480 V three-phase. If the line voltage in the panel is 400 V three-phase, the motor delivers its full 690 W at 6000 rpm. Continuous stall torque is 1.25 N.m across the 115...480 V three-phase range, and peak stall torque reaches 3.5 N.m. The torque constant is 0.69 N.m/A at 120 °C copper temperature — useful for sizing the drive's continuous current rating against the load cycle. ## Encoder, feedback, and mounting interface The encoder is an absolute single-turn Hiperface DSL — a digital serial-link feedback protocol common on Schneider servo drives. The drive must support Hiperface DSL to read position; if the existing drive uses a different feedback interface (EnDat, BiSS, incremental), this motor will not communicate without a feedback converter or a drive swap. Mounting uses an international standard flange with a 70 mm flange size, a 60 mm centring collar diameter, and a 2.5 mm centring collar depth. The shaft is 11 mm diameter with a parallel key, 23 mm shaft length. The motor body length is 180 mm (7.09 in). These dimensions confirm the mechanical fit to the machine frame or gearbox pilot bore. ## Environmental sealing and cooling The motor body is rated IP65 per IEC 60034-5, meaning it is dust-tight and protected against low-pressure water jets — suitable for washdown areas or dusty production lines. The shaft bushing without a shaft seal ring drops to IP54, so if the application sees direct spray on the shaft exit, an optional shaft seal ring should be fitted to maintain the full IP65 rating. Cooling is by natural convection — no external fan or forced air. The maximum radial force at the shaft is 730 N at 1000 rpm, and the maximum axial force is 80 N. These limits govern the belt tension or direct-coupling alignment to avoid bearing overload.","metaTitle":"Schneider Electric SH30701P1AF3000 Servo Motor with Brake","metaDescription":"Schneider Electric SH30701P1AF3000 servo motor with holding brake, 690 W continuous power, 3-phase, IP65, Hiperface DSL encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"7.09 in (180 mm)","Category":"US1PC5218359","Key width":"0.2 in (4 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.322 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"12.4 lbf.in (1.4 N.m) 230 V single phase 9.7 lbf.in (1.1 N.m) 400 V three phase 9.7 lbf.in (1.1 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.69 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"690 W","Mounting Support":"International standard flange","Sizing reference":"SH30701P","Back emf constant":"46 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"31.0 lbf.in (3.5 N.m) 115...480 V three phase","Stator inductance":"42.6 mH","Stator resistance":"10.4 Ohm","Brake pull-in power":"7 W","Maximum current Irms":"5.7 A","Nominal output power":"370 W 230 V single phase 690 W 400 V three phase 690 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"quicklock straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"11.06 lbf.in (1.25 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"730 N 1000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.8 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/7bceccd166b4f1389627b19d34fa9add.pdf","sourceUrl":"https://www.se.com/be/en/product/SH30701P1AF3000/sh3-servomotor-70mm-1-stack-keyed-shaft-singleturn-dsl-18bit-brake-onemotorcable-straight-m23-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30701P1AF3000/alternatives.json"},"ai":{"faq":[{"question":"How can I order the SH30701P1AF3000 or check availability?","answer":"Submit an RFQ for the exact quantity and lead time."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30701P1AF3000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30701P1AF3000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}