{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30701P1BF4100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30701P1BF4100","canonicalUrl":"https://aoctrl.com/schneider/SH30701P1BF4100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30701P1BF4100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 servo motor with holding brake, SH30701P1BF4100, 690 W continuous power, 3-phase, 3000-7200 rpm, IP65, absolute multiturn Hiperface DSL encoder, 70 mm flange.","salesMarkdown":"## Motor ratings that shift with the supply The SH30701P1BF4100: This SH3 frame servo delivers 690 W continuous power on 400 V or 480 V three-phase supply, but drops to 370 W on 230 V single-phase input — the nominal torque follows the same pattern: 1.4 N.m on single-phase, 1.1 N.m on three-phase. Speed capability also depends on the line: 3000 rpm on 230 V single-phase, 6000 rpm on 400 V three-phase, and 7200 rpm on 480 V three-phase. The holding brake is rated 3 N.m, so it holds the axis stationary at power-off — useful for vertical loads where the motor must not drift when the drive is disabled. ## Encoder and feedback — what the Hiperface DSL means Multiturn absolute means the motor knows its shaft position even after a power cycle and multiple rotations, so homing sequences on power-up are unnecessary in most applications. ## IP65 and environmental sealing The straight connector and the quicklock rotatable right-angled connector options give flexibility for cable exit direction in tight enclosures. ## Mechanical interface and mounting The 70 mm flange (IEC standard) with a 0.4 in (11 mm) shaft diameter and parallel key fits common mounting patterns for this frame size — the 0.9 in (23 mm) shaft length and 0.10 in (2.5 mm) centring collar depth are the critical engagement dimensions for the coupling or pulley. Maximum radial force is 900 N at 1000 rpm, and maximum axial force is 160 N — stay within these limits to avoid bearing overload.","metaTitle":"Schneider Electric SH30701P1BF4100 Servo Motor with Brake","metaDescription":"Schneider Electric SH30701P1BF4100 SH3 servo motor with holding brake, 690 W continuous, 3000-7200 rpm, IP65, absolute multiturn encoder. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"7.09 in (180 mm)","Inertia":"0.072 kg.cm² of brake 0.25 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (4 mm)","Shaft end":"Parallel key","Encoder type":"Absolute multiturn Hiperface DSL","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.322 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"12.4 lbf.in (1.4 N.m) 230 V single phase 9.7 lbf.in (1.1 N.m) 400 V three phase 9.7 lbf.in (1.1 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.69 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"690 W","Mounting Support":"International standard flange","Sizing reference":"SH30701P","Back emf constant":"46 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"31.0 lbf.in (3.5 N.m) 115...480 V three phase","Stator inductance":"21.3 mH","Stator resistance":"10.4 Ohm","Brake pull-in power":"7 W","Maximum current Irms":"5.7 A","Nominal output power":"370 W 230 V single phase 690 W 400 V three phase 690 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"quicklock rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"160 N","Output current 3s peak":"5.7 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"11.06 lbf.in (1.25 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"900 N 1000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.8 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn x 4096 turns","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,750.68","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/f0a1cbeaf306992096cf812e2e77f519.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30701P1BF4100/sh3-servomotor-70mm-1-stack-keyed-shaft-multiturn-dsl-18bit-brake-onemotorcable-angular-m23-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30701P1BF4100/alternatives.json"},"ai":{"faq":[{"question":"What is the holding torque of the brake on SH30701P1BF4100?","answer":"The holding brake provides 3 N.m (26.6 lbf.in) of holding torque, sufficient to keep the motor shaft stationary when power is removed."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30701P1BF4100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30701P1BF4100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}