{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702M01A1000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702M01A1000","canonicalUrl":"https://aoctrl.com/schneider/SH30702M01A1000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702M01A1000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30702M01A1000 SH3 servo motor, 640 W continuous power, three-phase, 3000 rpm at 400 V, absolute single-turn SinCos Hiperface encoder, smooth shaft, without holding brake, IP54/IP65.","salesMarkdown":"## Speed-torque profile across supply voltages The SH30702M01A1000: This SH3 frame motor delivers different nominal speeds depending on the supply: 750 rpm on 115 V single-phase, 1500 rpm on 230 V single-phase, 3000 rpm on 400 V three-phase, and 3600 rpm on 480 V three-phase. The nominal torque also shifts — 2.2 N·m at 115 V single-phase, 2.15 N·m at 230 V single-phase, and 2.03 N·m at both 400 V and 480 V three-phase. The continuous power rating is 640 W, with nominal output power varying from 340 W (230 V single-phase) to 780 W (480 V three-phase). Peak stall torque is 7.6 N·m across the 115–480 V three-phase range, and continuous stall torque sits at 2.04 N·m. The continuous stall current is 1.5 A, with a 3-second peak current of 6.0 A. This means the drive sizing must account for the actual line voltage — running it on 230 V single-phase cuts available speed and torque compared to a 400 V three-phase supply. ## Encoder and feedback — absolute single-turn Hiperface The motor carries an absolute single-turn SinCos Hiperface encoder. This gives position feedback on power-up without a homing cycle, as long as the drive supports the Hiperface protocol. Single-turn means the absolute position repeats every revolution — multi-turn applications need a different encoder option or external counting. The back EMF constant is 95.9 V/krpm at 20 °C, and the torque constant is 1.36 N·m/A at 120 °C. Stator resistance is 16.4 Ω and inductance is 41.55 mH — these values matter for the drive's current-loop tuning and for estimating I²R losses at the continuous stall current of 1.5 A. ## Mechanical interface and mounting constraints The motor has a smooth shaft (no keyway) with a diameter of 11 mm and a shaft length of 23 mm. The key width is 4 mm — if your load coupling expects a keyed shaft, you will need a shaft adapter or a different motor variant. The flange size is 70 mm with a centring collar diameter of 60 mm and a centring collar depth of 2.5 mm. Maximum radial force depends on speed: 710 N at 1000 rpm, dropping to 390 N at 6000 rpm. Maximum axial force is 80 N. The motor is cooled by natural convection — no external fan, so the thermal budget relies on the mounting surface and ambient airflow. The IP rating is IP54 at the shaft bushing without the seal ring, and IP65 on the motor body with the seal ring fitted. ## Connector options and installation notes The electrical connection can be either a rotatable right-angled connector or a straight connector — both are listed as available options. This gives flexibility for cable routing in tight cabinets. The overall length is 187 mm (7.4 in), and the mounting holes have a diameter of 5.5 mm on the international standard flange.","metaTitle":"Schneider SH30702M01A1000 Servo Motor, 640 W, 3000 rpm","metaDescription":"Schneider Electric SH30702M01A1000 SH3 servo motor, 640 W continuous power, 3000 rpm at 400 V three-phase, absolute single-turn SinCos Hiperface encoder","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"7.4 in (187 mm)","Inertia":"0.0 kg.cm² of brake 0.41 kg.cm² of motor","Key width":"0.2 in (4 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.41 kg.cm²","Nominal torque":"19.5 lbf.in (2.2 N.m) 115 V single phase 19.03 lbf.in (2.15 N.m) 230 V single phase 17.97 lbf.in (2.03 N.m) 400 V three phase 17.97 lbf.in (2.03 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"1.36 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"640 W","Mounting Support":"International standard flange","Sizing reference":"SH30702M","Back emf constant":"95.9 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"41.55 mH","Stator resistance":"16.4 Ohm","Maximum current Irms":"6.0 A","Nominal output power":"700 W 115 V single phase 340 W 230 V single phase 660 W 400 V three phase 780 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Output current 3s peak":"6.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.5 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/9042aa13aa57bf115af2e2bd1320b861.pdf","sourceUrl":"https://www.se.com/ca/en/product/SH30702M01A1000/sh3-servomotor-70mm-2-stacks-high-torque-smooth-shaft-sincos-singleturn-128-no-brake-straight-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702M01A1000/alternatives.json"},"ai":{"faq":[{"question":"What encoder type does SH30702M01A1000 use?","answer":"It uses an absolute single-turn SinCos Hiperface encoder, providing position feedback at power-up without a homing cycle."},{"question":"Does SH30702M01A1000 include a holding brake?","answer":"No, this variant is specified without a holding brake. If brake is required, a different SH3 variant should be selected."},{"question":"What is the shaft configuration on SH30702M01A1000?","answer":"The shaft is smooth (no keyway), 11 mm diameter, 23 mm length, with a 4 mm key width. The flange size is 70 mm with a 60 mm centring collar."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702M01A1000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702M01A1000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}