{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702M01A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702M01A2200","canonicalUrl":"https://aoctrl.com/schneider/SH30702M01A2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702M01A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30702M01A2200, 640 W continuous power, 3000 rpm at 400 V three-phase, 2.04 Nm continuous stall torque, IP65, absolute single-turn SinCos Hiperface encoder, smooth shaft, no brake.","salesMarkdown":"## Speed and torque across supply voltages The SH30702M01A2200: This SH3 frame servo delivers nominal speeds that shift with the supply: 750 rpm on 115 V single-phase, 1500 rpm on 230 V single-phase, 3000 rpm on 400 V three-phase, and 3600 rpm on 480 V three-phase. The nominal torque also varies — 2.2 Nm at 115 V single-phase, dropping to 2.03 Nm at 400 V three-phase and 480 V three-phase. That means the motor's rated output power changes from 700 W on 115 V single-phase down to 660 W on 400 V three-phase and up to 780 W on 480 V three-phase. ## Continuous ratings and stall performance Continuous power is 640 W, with a continuous stall torque of 2.04 Nm across the 115–480 V three-phase range. The continuous stall current sits at 1.5 A, while peak stall torque reaches 7.6 Nm with a 6.0 A peak current for 3 seconds. The torque constant is 1.36 Nm/A at 120 °C copper temperature — use this for drive current loop tuning. ## Feedback and environmental protection The encoder is an absolute single-turn SinCos Hiperface type — provides position feedback on power-up without a homing cycle, suitable for applications that need absolute position retention within one revolution. Back EMF constant is 95.9 V/krpm at 20 °C, which sets the voltage ceiling for the drive's DC bus at high speeds. IP65 rating on the motor body and shaft bushing, with IP67 on the housing per IEC 60034-5 — the shaft bushing seal is the wet-end barrier, so the motor withstands washdown but the connector interface needs matching IP-rated cabling. Cooling is by natural convection only — no forced air or liquid cooling, so the thermal budget depends on the mounting surface and ambient airflow. ## Mounting and mechanical interface International standard flange, 70 mm flange size, with a 60 mm centring collar and 2.5 mm collar depth. Four mounting holes at 5.5 mm diameter accept M5 bolts. The shaft is 11 mm diameter, 23 mm length, smooth (no keyway) — specify a shaft clamp or friction coupling. Maximum radial force at the shaft end is 710 N at 1000 rpm, derating to 390 N at 6000 rpm; maximum axial force is 80 N. Electrical connection options include a straight connector and a rotatable right-angled connector — choose based on cable exit clearance in the cabinet. Overall motor length is 187 mm.","metaTitle":"Schneider Electric SH30702M01A2200 Servo Motor, 640 W","metaDescription":"Schneider Electric SH30702M01A2200 servo motor, 640 W continuous, 3000 rpm at 400 V three-phase, IP65 rated, absolute single-turn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"7.4 in (187 mm)","Inertia":"0.0 kg.cm² of brake 0.41 kg.cm² of motor","Key width":"0.2 in (4 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.41 kg.cm²","Nominal torque":"19.5 lbf.in (2.2 N.m) 115 V single phase 19.03 lbf.in (2.15 N.m) 230 V single phase 17.97 lbf.in (2.03 N.m) 400 V three phase 17.97 lbf.in (2.03 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"1.36 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"640 W","Mounting Support":"International standard flange","Sizing reference":"SH30702M","Back emf constant":"95.9 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"41.55 mH","Stator resistance":"16.4 Ohm","Maximum current Irms":"6.0 A","Nominal output power":"700 W 115 V single phase 340 W 230 V single phase 660 W 400 V three phase 780 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Output current 3s peak":"6.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.5 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/a725b0bd2153964281e1c5c868a8eb0d.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH30702M01A2200/sh3-servomotor-70mm-2-stacks-high-torque-smooth-shaft-sincos-singleturn-128-no-brake-angular-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702M01A2200/alternatives.json"},"ai":{"faq":[{"question":"How can I order SH30702M01A2200 or check availability?","answer":"This part is sourced through authorized distribution channels."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702M01A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702M01A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}