{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702M01F1000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702M01F1000","canonicalUrl":"https://aoctrl.com/schneider/SH30702M01F1000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702M01F1000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30702M01F1000 SH3 servo motor, three-phase, 640 W continuous power, 3 Nm holding brake, absolute single-turn SinCos Hiperface encoder, IP65, smooth shaft, 70 mm flange.","salesMarkdown":"## Speed range across supply voltages The SH30702M01F1000: This SH3 servo delivers 750 rpm on 115 V single-phase, 1500 rpm on 230 V single-phase, 3000 rpm on 400 V three-phase, and 3600 rpm on 480 V three-phase — the speed ceiling is supply-dependent, not motor-limited. Maximum mechanical speed is 8000 rpm, so the motor itself can spin faster than any listed nominal; the drive and supply voltage set the operating point. ## Torque delivery for vertical-axis loads Holding brake torque is 3 Nm (26.6 lbf.in) — this holds the load at standstill without power to the motor windings, critical for Z-axis or gravity-loaded applications. Nominal torque varies by supply: 2.2 Nm at 115 V single-phase, 2.15 Nm at 230 V single-phase, and 2.03 Nm at 400/480 V three-phase. Peak stall torque reaches 7.6 Nm across the three-phase range, giving headroom for acceleration transients. Continuous stall torque is 2.04 Nm at 1.5 A continuous stall current — this is the thermal limit for sustained holding without forced cooling. ## Feedback and sealing for production environments Absolute single-turn SinCos Hiperface encoder provides position feedback at power-up without a homing cycle — reduces commissioning time on multi-axis lines. IP65 rating on the motor body and shaft bushing (with seal ring) means it withstands washdown and particulate ingress common in food, packaging, or machining coolant environments. Without the shaft seal ring, the bushing drops to IP54. Natural convection cooling — no fan to clog or fail, but the 640 W continuous power rating assumes free airflow around the 70 mm flange-mounted body. No minimum order quantity stated beyond the single-unit package count.","metaTitle":"Schneider Electric SH30702M01F1000 Servo Motor with Brake","metaDescription":"Schneider Electric SH30702M01F1000 SH3 servo motor, 640 W continuous, 3 Nm holding brake, absolute Hiperface encoder, IP65. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.4 in (212.5 mm)","Key width":"0.2 in (4 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.482 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"19.5 lbf.in (2.2 N.m) 115 V single phase 19.03 lbf.in (2.15 N.m) 230 V single phase 17.97 lbf.in (2.03 N.m) 400 V three phase 17.97 lbf.in (2.03 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"1.36 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"640 W","Mounting Support":"International standard flange","Sizing reference":"SH30702M","Back emf constant":"95.9 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"115.7 mH","Stator resistance":"16.4 Ohm","Maximum current Irms":"6 A","Nominal output power":"700 W 115 V single phase 340 W 230 V single phase 660 W 400 V three phase 780 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.5 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/50754e9c4036c1ac2504c1c72c6ccfe0.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH30702M01F1000/sh3-servomotor-70mm-2-stacks-high-torque-smooth-shaft-sincos-singleturn-128-brake-straight-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702M01F1000/alternatives.json"},"ai":{"faq":[{"question":"What is the closest alternative to SH30702M01F1000 in the SH3 family?","answer":"The sizing reference SH30702M shares the same 70 mm flange, 11 mm shaft, and 3-pole construction. The difference is in the encoder type, brake option, or winding variant — confirm the feedback and voltage match before substituting."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702M01F1000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702M01F1000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}