{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702M01F1100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702M01F1100","canonicalUrl":"https://aoctrl.com/schneider/SH30702M01F1100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702M01F1100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH30702M01F1100, 640 W continuous power, 3 N.m holding torque, absolute single-turn SinCos Hiperface encoder, IP65, 70 mm flange.","salesMarkdown":"## Speed range and voltage matching The SH30702M01F1100: On single-phase 115 V or 230 V it runs at 750 rpm or 1500 rpm respectively, so the drive parameter set must match the line voltage the motor sees at the cabinet. Maximum mechanical speed is 8000 rpm, well above the nominal range, giving headroom for field weakening above base speed if the application needs it. ## Encoder and feedback for closed-loop position Fitted with an absolute single-turn SinCos Hiperface encoder — this is a multi-signal feedback interface that transmits absolute position within one revolution plus incremental sine/cosine tracks for velocity control. The Hiperface protocol is standard across Schneider's Lexium drive family, so the motor mates directly without a separate feedback adapter card. ## Holding brake and torque profile The integrated holding brake delivers 3 N.m (26.6 lbf.in) static holding torque — enough to lock a vertical axis at rest without the drive holding current. Continuous stall torque is 2.04 N.m across the 115–480 V three-phase range, and peak stall torque reaches 7.6 N.m for short-duration acceleration or breakaway loads. Nominal torque at rated speed varies slightly by supply: 2.2 N.m on 115 V single-phase, 2.15 N.m on 230 V single-phase, and 2.03 N.m on 400 V or 480 V three-phase. The torque constant is 1.36 N.m/A at 120 °C copper temperature. ## IP65 enclosure and connector options IP65 rating on both the motor body and the shaft bushing per IEC 60034-5 — the seal holds against hose-directed water and dust ingress, so the motor can be mounted in washdown zones or dusty mill environments without a secondary cover. The electrical connection is available as either a rotatable right-angle connector or a straight connector — choose the version that fits the cable exit direction in your cable tray or conduit layout. Both options are factory-fitted; the connector is not field-swappable between the two styles. ## Mechanical interface and mounting International standard flange, 70 mm square (2.8 in), with a 60 mm centring collar and 2.5 mm collar depth. The shaft is 11 mm diameter, 23 mm long, smooth (no keyway), with a 4 mm key width if a key is added — the smooth shaft suits a clamp-type coupling directly, while the keyway provision allows a positive-drive connection when specified. No official successor or cross-reference part is published by Schneider for this order code. The SH30702M sizing reference anchors the frame size and winding variant; any replacement would need to match the 70 mm flange, 11 mm shaft, Hiperface feedback, and holding brake torque.","metaTitle":"Schneider Electric SH30702M01F1100 Servo Motor with Brake","metaDescription":"Schneider Electric SH30702M01F1100 SH3 servo motor with holding brake.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.4 in (212.5 mm)","Key width":"0.2 in (4 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.482 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"19.5 lbf.in (2.2 N.m) 115 V single phase 19.03 lbf.in (2.15 N.m) 230 V single phase 17.97 lbf.in (2.03 N.m) 400 V three phase 17.97 lbf.in (2.03 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"1.36 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"640 W","Mounting Support":"International standard flange","Sizing reference":"SH30702M","Back emf constant":"95.9 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"115.7 mH","Stator resistance":"16.4 Ohm","Maximum current Irms":"6 A","Nominal output power":"700 W 115 V single phase 340 W 230 V single phase 660 W 400 V three phase 780 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.5 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/fda1c4a471b8b0670e38cf48ee801c99.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH30702M01F1100/sh3-servomotor-70mm-2-stacks-high-torque-smooth-shaft-sincos-singleturn-128-brake-straight-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702M01F1100/alternatives.json"},"ai":{"faq":[{"question":"What is the holding brake torque on SH30702M01F1100?","answer":"The holding brake delivers 3 N.m (26.6 lbf.in) static holding torque, sufficient to hold a vertical axis load at standstill without drive current."},{"question":"What encoder type does SH30702M01F1100 use?","answer":"It uses an absolute single-turn SinCos Hiperface encoder, providing absolute position within one revolution plus sine/cosine velocity feedback. This mates directly with Schneider Lexium drives without an adapter."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702M01F1100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702M01F1100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}