{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702M01F2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702M01F2000","canonicalUrl":"https://aoctrl.com/schneider/SH30702M01F2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702M01F2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with holding brake, 640 W continuous power, three-phase, 3000 rpm at 400 V three-phase, absolute single-turn SinCos Hiperface encoder, IP65, 70 mm flange.","salesMarkdown":"## Three-phase servo with integrated holding brake The SH30702M01F2000 is a three-phase servo motor from Schneider's SH3 series, wound for three-phase supply only — not a single-phase motor. The nominal speed shifts with the line voltage: 3000 rpm at 400 V three-phase, 3600 rpm at 480 V three-phase, and derated to 750 rpm at 115 V single-phase or 1500 rpm at 230 V single-phase if fed from a VFD that synthesizes single-phase input. ## Encoder feedback and position loop fit The encoder is an absolute single-turn SinCos Hiperface type — this is a Schneider-standard feedback protocol, not incremental or multi-turn. The drive controller must support Hiperface communication; a standard incremental encoder input will not read the absolute position. Continuous power is 640 W, with a continuous stall torque of 2.04 N·m across the 115–480 V three-phase range. Peak stall torque reaches 7.6 N·m (67.3 lbf·in), but that is duty-cycle limited — the motor cannot sustain peak torque continuously without exceeding the 130 °C copper hot-spot temperature. ## Mounting and environmental sealing The motor uses a 70 mm flange (IEC standard) with a 60 mm centring collar and 2.5 mm collar depth — this is a B5 or B14 flange pattern. The four mounting holes are 5.5 mm diameter on a bolt circle that matches the flange size. IP rating depends on the shaft seal: without the seal ring, the shaft bushing is IP54; with the seal ring installed, both the motor body and shaft bushing achieve IP65 per IEC 60034-5. For washdown or wet environments, the seal ring must be specified at order.","metaTitle":"Schneider Electric SH30702M01F2000 Servo Motor with Brake","metaDescription":"Schneider Electric SH30702M01F2000 servo motor with holding brake, 640 W continuous, 3-phase, 3000 rpm at 400 V, absolute Hiperface encoder, IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.4 in (212.5 mm)","Key width":"0.2 in (4 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.482 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"19.5 lbf.in (2.2 N.m) 115 V single phase 19.03 lbf.in (2.15 N.m) 230 V single phase 17.97 lbf.in (2.03 N.m) 400 V three phase 17.97 lbf.in (2.03 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"1.36 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"640 W","Mounting Support":"International standard flange","Sizing reference":"SH30702M","Back emf constant":"95.9 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"115.7 mH","Stator resistance":"16.4 Ohm","Maximum current Irms":"6 A","Nominal output power":"700 W 115 V single phase 340 W 230 V single phase 660 W 400 V three phase 780 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.5 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/643887a321376d6d371c17ecc6cdd988.pdf","sourceUrl":"https://www.se.com/us/en/product/SH30702M01F2000/sh3-servomotor-70mm-2-stacks-high-torque-smooth-shaft-sincos-singleturn-128-brake-angular-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702M01F2000/alternatives.json"},"ai":{"faq":[{"question":"What is the closest alternative to SH30702M01F2000 in the SH3 family?","answer":"The SH30702M sizing reference indicates this is a specific variant within the SH3 frame size; any replacement would require matching the flange size, encoder type, brake torque, and winding voltage range."},{"question":"What phase and voltage does SH30702M01F2000 require?","answer":"The motor is wound for three-phase supply. Nominal speed varies by voltage: 3000 rpm at 400 V three-phase, 3600 rpm at 480 V three-phase, and derated speeds at lower single-phase voltages if fed through a VFD."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702M01F2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702M01F2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}