{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702M01F2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702M01F2100","canonicalUrl":"https://aoctrl.com/schneider/SH30702M01F2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702M01F2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH30702M01F2100, 640 W continuous power, 3 N.m holding torque, absolute single-turn SinCos Hiperface encoder, IP65, 70 mm flange.","salesMarkdown":"## Speed vs supply voltage — the real constraint The SH30702M01F2100: This motor's nominal speed depends entirely on the supply voltage you feed it: 750 rpm on 115 V single-phase, 1500 rpm on 230 V single-phase, 3000 rpm on 400 V three-phase, and 3600 rpm on 480 V three-phase. If your line runs 400 V three-phase, the motor delivers 3000 rpm nominal — but the nominal torque also shifts slightly, from 2.2 N.m at 115 V down to 2.03 N.m at 400 V and 480 V. That torque profile matters when sizing for a constant-torque load like a feed axis. ## Encoder feedback and brake — what's built in The feedback device is an absolute single-turn SinCos Hiperface encoder — no homing sequence needed on power-up, which saves cycle time on multi-axis machines. The holding brake is integrated, rated at 3 N.m holding torque, so the vertical axis stays put when the drive is disabled. No external brake resistor or holding circuit to wire. ## Continuous and peak torque — the working envelope Continuous stall torque is 2.04 N.m across the 115-480 V three-phase range, with a continuous stall current of 1.5 A. Peak stall torque reaches 7.6 N.m — roughly 3.7× the continuous figure — which covers acceleration transients and load bumps without tripping the drive's current limit. The continuous power rating is 640 W, with nominal output power varying from 340 W (230 V single-phase) to 780 W (480 V three-phase). ## Environmental rating and mounting IP65 on both the motor body and the shaft bushing per IEC 60034-5 — this motor handles washdown environments in food or packaging lines without a secondary cover. Cooling is natural convection, so no fan or compressed air needed. The flange is a standard 70 mm international pattern with a 60 mm centring collar and 5.5 mm mounting holes.","metaTitle":"Schneider Electric SH30702M01F2100 Servo Motor with Brake","metaDescription":"Schneider Electric SH30702M01F2100 servo motor with brake, 640 W continuous, 3 N.m holding torque, absolute single-turn Hiperface encoder, IP65, active","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.4 in (212.5 mm)","Key width":"0.2 in (4 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.482 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"19.5 lbf.in (2.2 N.m) 115 V single phase 19.03 lbf.in (2.15 N.m) 230 V single phase 17.97 lbf.in (2.03 N.m) 400 V three phase 17.97 lbf.in (2.03 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"1.36 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"640 W","Mounting Support":"International standard flange","Sizing reference":"SH30702M","Back emf constant":"95.9 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"115.7 mH","Stator resistance":"16.4 Ohm","Maximum current Irms":"6 A","Nominal output power":"700 W 115 V single phase 340 W 230 V single phase 660 W 400 V three phase 780 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.5 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/5aa9ed5c8ffc1ecf19cd04cfdcee639e.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH30702M01F2100/sh3-servomotor-70mm-2-stacks-high-torque-smooth-shaft-sincos-singleturn-128-brake-angular-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702M01F2100/alternatives.json"},"ai":{"faq":[{"question":"How can I order or get a quote for SH30702M01F2100?","answer":"No stock-holding claim is made here."},{"question":"What encoder type does this motor use?","answer":"It uses an absolute single-turn SinCos Hiperface encoder. That means the absolute position is known immediately on power-up — no reference run required — and the SinCos analog tracks provide fine interpolation for the drive."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702M01F2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702M01F2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}