{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702M02A1000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702M02A1000","canonicalUrl":"https://aoctrl.com/schneider/SH30702M02A1000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702M02A1000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 servo motor, SH30702M02A1000, 640 W continuous power, 3000 rpm at 400 V three-phase, absolute multiturn SinCos Hiperface encoder, IP54/IP65, international standard flange, smooth shaft.","salesMarkdown":"## Motor ratings that shift with supply voltage The SH30702M02A1000: This SH3 frame servo motor delivers 640 W continuous power, but the nominal speed and torque depend on what voltage you feed it. At 400 V three-phase it spins 3000 rpm with 2.03 N.m nominal torque; at 480 V three-phase it reaches 3600 rpm at the same torque. On single-phase 115 V the speed drops to 750 rpm and torque rises to 2.2 N.m — the winding is designed for multi-voltage operation, so the drive selection must match the supply and the load profile. Peak stall torque is 7.6 N.m across the 115...480 V three-phase range — that is the short-term overload for acceleration or overcoming stiction. Continuous stall torque sits at 2.04 N.m, which is the thermal limit for holding position without a brake. The motor ships without a holding brake, so if the application needs position hold at power-off, an external brake or a brake-equipped variant is required. ## Encoder and feedback — absolute position without homing The absolute multiturn SinCos Hiperface encoder tracks position through multiple shaft revolutions, so the drive knows the rotor angle at power-up without a homing sequence. This saves cycle time on machines that power-cycle between batches. The Hiperface protocol is common across Schneider and third-party servo drives — confirm the drive's encoder interface supports SinCos Hiperface before wiring. Electrical connection uses a rotatable right-angled connector or a straight connector — the rotatable version lets the cable exit in any orientation around the motor housing, which helps in tight cable-tray layouts. The IP rating is IP54 at the shaft bushing without the shaft seal ring, and IP65 on the motor body and with the shaft bushing seal ring fitted. For washdown or dusty environments, specify the seal ring. ## Mounting and mechanical interface The motor flange is 70 mm (2.8 in) with a 60 mm centring collar and 5.5 mm mounting holes on the international standard flange pattern. Shaft diameter is 11 mm with a 23 mm shaft length and a 4 mm keyway. The shaft end is smooth — no threaded hole or pilot extension. Overall length is 187 mm (7.4 in). Maximum radial force Fr is 710 N at 1000 rpm, derating to 390 N at 6000 rpm. Maximum axial force Fa is 80 N. These limits govern the coupling selection — a belt drive or overhung load must stay within the Fr curve at the operating speed to avoid bearing damage.","metaTitle":"Schneider Electric SH30702M02A1000 Servo Motor, 640 W","metaDescription":"Schneider Electric SH30702M02A1000 SH3 servo motor, 640 W continuous power, 3000 rpm at 400 V three-phase, absolute multiturn SinCos Hiperface encoder","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"7.4 in (187 mm)","Inertia":"0.0 kg.cm² of brake 0.41 kg.cm² of motor","Key width":"0.2 in (4 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.41 kg.cm²","Nominal torque":"19.5 lbf.in (2.2 N.m) 115 V single phase 19.03 lbf.in (2.15 N.m) 230 V single phase 17.97 lbf.in (2.03 N.m) 400 V three phase 17.97 lbf.in (2.03 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"1.36 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"640 W","Mounting Support":"International standard flange","Sizing reference":"SH30702M","Back emf constant":"95.9 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"41.55 mH","Stator resistance":"16.4 Ohm","Maximum current Irms":"6.0 A","Nominal output power":"700 W 115 V single phase 340 W 230 V single phase 660 W 400 V three phase 780 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Output current 3s peak":"6.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.5 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/381cb54185ecea8dde27eac4d73d6f95.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH30702M02A1000/sh3-servomotor-70mm-2-stacks-high-torque-smooth-shaft-sincos-multiturn-128-no-brake-straight-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702M02A1000/alternatives.json"},"ai":{"faq":[{"question":"What is SH30702M02A1000's listed phase?","answer":"The motor is a three-phase design. It can also run on single-phase 115 V or 230 V at reduced speed and torque, per the multi-voltage winding."},{"question":"What is SH30702M02A1000's listed length?","answer":"Overall length is 7.4 in (187 mm), excluding the connector and cable exit."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702M02A1000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702M02A1000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}