{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702M02A2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702M02A2000","canonicalUrl":"https://aoctrl.com/schneider/SH30702M02A2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702M02A2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30702M02A2000, 640 W continuous power, 3000 rpm at 400 V three-phase, 2.03 N.m nominal torque, absolute multiturn SinCos Hiperface encoder, IP54/IP65, without holding brake.","salesMarkdown":"## 640 W, 3000 rpm — the speed-torque envelope that matters The SH30702M02A2000: This SH3-series servo motor delivers 640 W continuous power with a nominal speed of 3000 rpm at 400 V three-phase input, and 2.03 N.m nominal torque across the 400 V and 480 V three-phase supplies. The nominal output power at 400 V three-phase is 660 W, so the continuous power rating (640 W) is the thermal limit under natural convection cooling — no fan, so sustained duty cycles must stay within that envelope. Peak stall torque reaches 7.6 N.m (67.3 lbf.in) across the 115–480 V three-phase range, giving a 3.7× overload margin over nominal torque for acceleration or short-duration loads. ## Absolute multiturn Hiperface encoder — position feedback for closed-loop control The encoder is an absolute multiturn SinCos Hiperface type, providing single-turn and multi-turn position data over a SinCos interface — no homing cycle needed after power loss, and the multi-turn count tracks absolute position across multiple shaft revolutions. This feedback pairs with Schneider servo drives that support Hiperface protocol; the drive reads the absolute position on startup and the SinCos analog tracks for real-time commutation and velocity control. ## Mounting, cooling, and connection — integration constraints Mounts on an international standard flange with a 70 mm (2.8 in) flange size and a 60 mm centring collar, secured through 5.5 mm mounting holes — fits standard servo motor brackets in that frame class. Cooling is by natural convection only — no integrated fan, so the motor relies on the ambient air and the mounting surface for heat dissipation; derate if enclosed or in a high-ambient cabinet. Electrical connection options include a straight connector or a rotatable right-angled connector, both factory-fitted — choose the variant that best routes the cable in your panel layout without adding a separate junction box. IP protection is IP54 at the shaft bushing without the shaft seal ring, and IP65 with the seal ring fitted — for washdown or dusty environments, specify the seal ring and confirm the mating connector is also rated. ## No holding brake — plan external braking or drive-based hold This variant ships without a holding brake — the shaft is smooth (no keyway on the shaft end) and the motor relies on the drive's holding torque or an external mechanical brake to prevent drift when power is off.","metaTitle":"Schneider Electric SH30702M02A2000 Servo Motor, 640 W","metaDescription":"Schneider Electric SH30702M02A2000 servo motor, 640 W continuous power, 3000 rpm at 400 V three-phase, 2.03 N.m nominal torque, absolute multiturn SinCos","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"7.4 in (187 mm)","Inertia":"0.0 kg.cm² of brake 0.41 kg.cm² of motor","Key width":"0.2 in (4 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.41 kg.cm²","Nominal torque":"19.5 lbf.in (2.2 N.m) 115 V single phase 19.03 lbf.in (2.15 N.m) 230 V single phase 17.97 lbf.in (2.03 N.m) 400 V three phase 17.97 lbf.in (2.03 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"1.36 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"640 W","Mounting Support":"International standard flange","Sizing reference":"SH30702M","Back emf constant":"95.9 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"41.55 mH","Stator resistance":"16.4 Ohm","Maximum current Irms":"6.0 A","Nominal output power":"700 W 115 V single phase 340 W 230 V single phase 660 W 400 V three phase 780 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Output current 3s peak":"6.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.5 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/7f34247045013d9d543fe82486be16db.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH30702M02A2000/sh3-servomotor-70mm-2-stacks-high-torque-smooth-shaft-sincos-multiturn-128-no-brake-angular-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702M02A2000/alternatives.json"},"ai":{"faq":[{"question":"What is the nominal torque of SH30702M02A2000 at 400 V three-phase?","answer":"At 400 V three-phase, the nominal torque is 2.03 N.m (17.97 lbf.in)."},{"question":"What encoder type does this motor use?","answer":"It uses an absolute multiturn SinCos Hiperface encoder, providing absolute position feedback over multiple revolutions without a homing cycle."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702M02A2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702M02A2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}