{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702M02A2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702M02A2100","canonicalUrl":"https://aoctrl.com/schneider/SH30702M02A2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702M02A2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30702M02A2100, 640 W continuous power, 3000 rpm at 400 V three-phase, 2.2 Nm nominal torque, absolute multiturn SinCos Hiperface encoder, IP65, smooth shaft, without brake.","salesMarkdown":"## Motor ratings across supply voltages The SH30702M02A2100 delivers 640 W continuous power, but the nominal speed and torque shift with the supply. At 400 V three-phase it spins 3000 rpm with 2.03 Nm; at 480 V three-phase it reaches 3600 rpm at the same torque. On single-phase 230 V it runs 1500 rpm at 2.15 Nm, and on 115 V single-phase it drops to 750 rpm at 2.2 Nm. The peak stall torque is 7.6 Nm across the 115...480 V three-phase range. Continuous stall torque is 2.04 Nm at 1.5 A continuous stall current, with a maximum current Irms of 6.0 A. ## Encoder and feedback — absolute multiturn SinCos Hiperface The encoder is an absolute multiturn SinCos Hiperface type — this gives position and speed feedback without a home cycle on power-up, which matters on a multi-axis line where a lost position on a power bounce means a re-reference run. The SinCos analog track also gives fine interpolation beyond the digital resolution. Back EMF constant is 95.9 V/krpm at 20 °C. Stator resistance is 16.4 Ohm and stator inductance is 41.55 mH — these set the electrical time constant and influence the drive tuning gains for the current loop. ## Mechanical interface and environmental sealing The motor flange is 70 mm (2.8 in) with a 60 mm centring collar and 5.5 mm mounting holes — this is the standard IEC flange pattern for this frame size. The shaft is 11 mm diameter with a 23 mm length and a 4 mm keyway, but this variant ships with a smooth shaft (no key). If the application needs a keyed shaft for positive torque transmission, confirm the coupling or pulley fit. Cooling is by natural convection, so no external fan or coolant lines are needed.","metaTitle":"Schneider Electric SH30702M02A2100 Servo Motor, 640 W","metaDescription":"Schneider Electric SH30702M02A2100 SH3 servo motor, 640 W continuous power, 3000 rpm at 400 V three-phase. Absolute multiturn SinCos Hiperface encoder, IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"7.4 in (187 mm)","Inertia":"0.0 kg.cm² of brake 0.41 kg.cm² of motor","Key width":"0.2 in (4 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.41 kg.cm²","Nominal torque":"19.5 lbf.in (2.2 N.m) 115 V single phase 19.03 lbf.in (2.15 N.m) 230 V single phase 17.97 lbf.in (2.03 N.m) 400 V three phase 17.97 lbf.in (2.03 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"1.36 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"640 W","Mounting Support":"International standard flange","Sizing reference":"SH30702M","Back emf constant":"95.9 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"41.55 mH","Stator resistance":"16.4 Ohm","Maximum current Irms":"6.0 A","Nominal output power":"700 W 115 V single phase 340 W 230 V single phase 660 W 400 V three phase 780 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Output current 3s peak":"6.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.5 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/180adf90b6662263121258705e6dc89a.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH30702M02A2100/sh3-servomotor-70mm-2-stacks-high-torque-smooth-shaft-sincos-multiturn-128-no-brake-angular-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702M02A2100/alternatives.json"},"ai":{"faq":[{"question":"What is the shaft configuration on SH30702M02A2100?","answer":"The shaft is 11 mm diameter, 23 mm long, with a 4 mm keyway — but this variant ships with a smooth shaft (no key). The motor has no holding brake. If the application requires a keyed shaft or an integrated brake, a different variant in the SH3 family is needed."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702M02A2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702M02A2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}