{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702M02A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702M02A2200","canonicalUrl":"https://aoctrl.com/schneider/SH30702M02A2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702M02A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30702M02A2200, 640 W continuous power, 3000 rpm nominal speed at 400 V three-phase, absolute multiturn SinCos Hiperface encoder, IP65, smooth shaft, 70 mm flange.","salesMarkdown":"## Speed-torque envelope across supply voltages The SH30702M02A2200 delivers a nominal speed of 3000 rpm at 400 V three-phase supply, with a nominal torque of 2.03 N·m (17.97 lbf·in) at that operating point. At 480 V three-phase the same torque holds, and the speed ceiling rises to 3600 rpm. On single-phase 230 V the nominal speed drops to 1500 rpm with 2.15 N·m torque, and on 115 V single-phase it runs 750 rpm at 2.2 N·m. This voltage-dependent speed-torque curve means the motor's rated output power shifts from 660 W (400 V) to 780 W (480 V) and down to 340 W (230 V single-phase) — the actual usable power depends on the drive's input supply, not just the motor nameplate. ## Encoder feedback and drive pairing The motor carries an absolute multiturn SinCos Hiperface encoder. This is a digital-plus-analog feedback interface common on Schneider Lexium drives and third-party servo drives that support the Hiperface protocol. The multiturn absolute tracking means the drive knows the shaft position at power-up without a homing cycle — critical for applications where the axis position must be retained after a power loss. The SinCos analog track provides fine interpolation for velocity ripple control. Verify that the selected drive's encoder input supports Hiperface and the multiturn resolution before committing the BOM line. ## Sealing and environmental fit The motor body carries IP65 protection per IEC 60034-5, with the shaft bushing also rated IP65 and the housing IP67. The IP67 housing rating exceeds the shaft bushing rating, so the seal at the shaft exit is the wet-end limit; in continuous spray applications, orient the motor so the shaft seal is not directly impinged. ## Mounting and shaft details The motor flange is 70 mm (2.8 in) with a 60 mm centring collar and 5.5 mm mounting holes — this is the standard IEC 72-1 flange pattern for this frame size, compatible with most planetary gearboxes and machine-mount brackets. The shaft is smooth (no keyway) with an 11 mm diameter and 23 mm length. A clamping-type coupling or friction-lock hub is required; a keyed coupling will not engage. The maximum radial force at the shaft is 710 N at 1000 rpm, dropping to 390 N at 6000 rpm — this governs the allowable belt tension or overhung load from a direct-coupled pulley. ## No holding brake — plan for vertical loads This variant ships without a holding brake. For vertical-axis applications (Z-axis, elevators, gravity-loaded conveyors), an external brake or a brake-equipped motor variant must be specified to prevent the load from dropping when the drive is disabled. The motor's own detent torque and the drive's holding current are not sufficient for safety-rated load holding. If the application requires a brake, order the equivalent SH3 motor with the brake option — the frame size and encoder are the same, so the mechanical integration does not change.","metaTitle":"Schneider Electric SH30702M02A2200 Servo Motor, 640 W","metaDescription":"Schneider Electric SH30702M02A2200 SH3 servo motor, 640 W continuous, 3000 rpm at 400 V three-phase, absolute multiturn encoder, IP65, active production","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"7.4 in (187 mm)","Inertia":"0.0 kg.cm² of brake 0.41 kg.cm² of motor","Key width":"0.2 in (4 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.41 kg.cm²","Nominal torque":"19.5 lbf.in (2.2 N.m) 115 V single phase 19.03 lbf.in (2.15 N.m) 230 V single phase 17.97 lbf.in (2.03 N.m) 400 V three phase 17.97 lbf.in (2.03 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"1.36 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"640 W","Mounting Support":"International standard flange","Sizing reference":"SH30702M","Back emf constant":"95.9 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"41.55 mH","Stator resistance":"16.4 Ohm","Maximum current Irms":"6.0 A","Nominal output power":"700 W 115 V single phase 340 W 230 V single phase 660 W 400 V three phase 780 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Output current 3s peak":"6.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.5 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/64a4c8e95c8a887230490c14475df782.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH30702M02A2200/sh3-servomotor-70mm-2-stacks-high-torque-smooth-shaft-sincos-multiturn-128-no-brake-angular-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702M02A2200/alternatives.json"},"ai":{"faq":[{"question":"How can I get pricing and availability for SH30702M02A2200?","answer":"No stock-holding claim is made here; each order is confirmed against live distributor inventory."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702M02A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702M02A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}