{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702M02F1000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702M02F1000","canonicalUrl":"https://aoctrl.com/schneider/SH30702M02F1000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702M02F1000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30702M02F1000, 640 W continuous power, 3 N.m holding brake, absolute multiturn SinCos Hiperface encoder, IP65, 70 mm flange, smooth shaft.","salesMarkdown":"## Speed-torque envelope depends on supply voltage The SH30702M02F1000 is a three-phase servo motor that also accepts single-phase 115 V and 230 V input, but the output changes significantly with the supply. At 115 V single phase, nominal speed is 750 rpm with 2.2 N.m torque; at 230 V single phase it reaches 1500 rpm at 2.15 N.m; on 400 V three phase it runs 3000 rpm at 2.03 N.m; and on 480 V three phase it hits 3600 rpm at 2.03 N.m. The nominal output power varies from 340 W (230 V single phase) to 780 W (480 V three phase), with continuous power rated at 640 W. The phase and voltage you feed it directly set the available speed and torque — this is the first parameter to lock in for the application. ## Encoder and brake — cycle-time and position-hold The absolute multiturn SinCos Hiperface encoder retains position through power cycles — no homing sequence needed after a power loss, which matters for applications like gantries or rotary tables that must resume mid-cycle. The integrated holding brake delivers 3 N.m holding torque, enough to hold a vertical load or keep the shaft stationary when the drive is off. The brake engages automatically on power removal, so the cell doesn't drift during an E-stop or power-down. ## Torque headroom and thermal limits Continuous stall torque is 2.04 N.m at 1.5 A continuous stall current, while peak stall torque reaches 7.6 N.m — a 3.7× ratio that gives real acceleration headroom for short overloads. The torque constant is 1.36 N.m/A at 120 °C copper temperature, and the stator resistance is 16.4 Ohm with 115.7 mH inductance. Maximum continuous current is 6 A RMS. Cooling is natural convection, so the thermal budget depends on the duty cycle and the mounting flange's ability to sink heat — a high-duty-cycle application on a small bracket may need derating. ## Mechanical fit and shaft interface The motor flange is 70 mm (2.8 in) with a 60 mm centring collar and 2.5 mm collar depth. The shaft is 11 mm diameter, 23 mm long, smooth (no keyway). Mounting holes are 5.5 mm diameter on the flange. The sizing reference is SH30702M. The electrical connection uses a rotatable right-angled connector or a straight connector — the rotatable option helps route the cable in tight panels without bending the connector body. IP protection is IP54 at the shaft bushing without a seal ring, IP65 on the motor body and with the shaft seal ring fitted — specify the seal if the motor sees washdown or coolant spray. ## Radial and axial load limits Maximum radial force Fr is speed-dependent: 710 N at 1000 rpm, dropping to 390 N at 6000 rpm. Maximum axial force Fa is 80 N. The bearing load limit shrinks as speed increases, so a belt-drive or overhung-load application must check the Fr curve at the operating speed. Maximum mechanical speed is 8000 rpm, but the radial load capacity at that speed is below the 390 N at 6000 rpm — direct coupling is preferred for high-speed runs.","metaTitle":"Schneider Electric SH30702M02F1000 Servo Motor, 640 W","metaDescription":"Schneider Electric SH30702M02F1000 SH3 servo motor, 640 W continuous, 3 N.m holding brake, absolute multiturn Hiperface encoder, IP65, active production.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.4 in (212.5 mm)","Key width":"0.2 in (4 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.482 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"19.5 lbf.in (2.2 N.m) 115 V single phase 19.03 lbf.in (2.15 N.m) 230 V single phase 17.97 lbf.in (2.03 N.m) 400 V three phase 17.97 lbf.in (2.03 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"1.36 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"640 W","Mounting Support":"International standard flange","Sizing reference":"SH30702M","Back emf constant":"95.9 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"115.7 mH","Stator resistance":"16.4 Ohm","Maximum current Irms":"6 A","Nominal output power":"700 W 115 V single phase 340 W 230 V single phase 660 W 400 V three phase 780 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.5 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/ad2e116b6453f293ce913342819230bd.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH30702M02F1000/sh3-servomotor-70mm-2-stacks-high-torque-smooth-shaft-sincos-multiturn-128-brake-straight-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702M02F1000/alternatives.json"},"ai":{"faq":[{"question":"What encoder type does SH30702M02F1000 use?","answer":"It uses an absolute multiturn SinCos Hiperface encoder, which retains position through power cycles and eliminates the need for a homing sequence after power loss."},{"question":"What is the holding brake torque on SH30702M02F1000?","answer":"The integrated holding brake delivers 3 N.m (26.6 lbf.in) holding torque, sufficient to hold vertical loads or keep the shaft stationary when drive power is removed."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702M02F1000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702M02F1000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}