{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702M02F1100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702M02F1100","canonicalUrl":"https://aoctrl.com/schneider/SH30702M02F1100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702M02F1100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30702M02F1100 SH3 servo motor with holding brake, 640 W continuous power, 3000 rpm at 400 V three-phase, IP65, absolute multiturn SinCos Hiperface encoder, 70 mm flange.","salesMarkdown":"## Speed range across supply voltages — 750 to 3600 rpm The SH30702M02F1100 delivers 750 rpm on 115 V single-phase, 1500 rpm on 230 V single-phase, 3000 rpm on 400 V three-phase, and 3600 rpm on 480 V three-phase. That speed-versus-voltage table tells you exactly which drive bus voltage you need to hit your target spindle speed — no guesswork. Continuous power is 640 W, with nominal output power varying from 340 W (230 V single-phase) up to 780 W (480 V three-phase). The 640 W continuous figure is the thermal limit under natural convection cooling — no fan to fail, but also no forced-air margin if you push sustained overload. Peak stall torque hits 7.6 N·m across the 115–480 V three-phase range, giving you the grunt for rapid acceleration. Continuous stall torque is 2.04 N·m — the holding brake delivers 3 N·m, so it holds the load stationary even with the motor unpowered. ## Encoder feedback and holding brake — position hold without drift The absolute multiturn SinCos Hiperface encoder gives you position feedback that survives power cycles — no homing routine needed on restart. That matters for vertical-axis applications where the load must not drop when the drive powers down. The holding brake is rated 3 N·m and engages when the motor is de-energised. Combined with the IP65 rating on both the motor body and shaft bushing, this motor is suited for washdown environments where a Z-axis load needs to stay put during cleaning cycles. Electrical connection comes as either a rotatable right-angle connector or a straight connector — choose the one that fits your cable exit direction without adding a right-angle adapter. ## Mechanical fit — flange, shaft, and force limits The motor flange is 70 mm (2.8 in) with a 60 mm centring collar and 5.5 mm mounting holes — standard international flange pattern. Shaft diameter is 11 mm with a 23 mm smooth shaft and 4 mm keyway width. Maximum radial force depends on speed: 710 N at 1000 rpm, dropping to 390 N at 6000 rpm. Axial force limit is 80 N. These numbers set the bearing life budget — overshoot them and you shorten the service interval. ## Drive tuning parameters — inductance, resistance, and back EMF Stator resistance is 16.4 Ω and inductance is 115.7 mH — these go into the drive's autotune routine for current-loop gains. The torque constant is 1.36 N·m/A at 120 °C copper temperature, and the back EMF constant is 95.9 V/krpm at 20 °C. Continuous stall current is 1.5 A; maximum RMS current is 6 A. The copper hot-spot temperature limit is 130 °C, so the continuous torque rating assumes natural convection cooling at that thermal ceiling. Sourced through independent distribution channels against an RFQ.","metaTitle":"Schneider Electric SH30702M02F1100 Servo Motor with Brake","metaDescription":"Schneider Electric SH30702M02F1100 servo motor with holding brake, 640 W continuous, 3000 rpm at 400 V three-phase, IP65, absolute multiturn encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.4 in (212.5 mm)","Key width":"0.2 in (4 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.482 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"19.5 lbf.in (2.2 N.m) 115 V single phase 19.03 lbf.in (2.15 N.m) 230 V single phase 17.97 lbf.in (2.03 N.m) 400 V three phase 17.97 lbf.in (2.03 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"1.36 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"640 W","Mounting Support":"International standard flange","Sizing reference":"SH30702M","Back emf constant":"95.9 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"115.7 mH","Stator resistance":"16.4 Ohm","Maximum current Irms":"6 A","Nominal output power":"700 W 115 V single phase 340 W 230 V single phase 660 W 400 V three phase 780 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.5 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/433965639ba2b12afcfd7ff745603f28.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH30702M02F1100/sh3-servomotor-70mm-2-stacks-high-torque-smooth-shaft-sincos-multiturn-128-brake-straight-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702M02F1100/alternatives.json"},"ai":{"faq":[{"question":"What is the closest alternative to SH30702M02F1100 in the SH3 family?","answer":"The SH30702M sizing reference covers the frame size; any substitution would require checking the flange, shaft, encoder type, and brake specifications against the BOM."},{"question":"What compliance documentation does Schneider Electric provide for SH30702M02F1100?","answer":"The motor carries an IP65 rating conforming to IEC 60034-5 on both the motor body and shaft bushing."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702M02F1100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702M02F1100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}