{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702M02F1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702M02F1200","canonicalUrl":"https://aoctrl.com/schneider/SH30702M02F1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702M02F1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30702M02F1200, three-phase, 640 W continuous power, 3 N·m holding brake, absolute multiturn SinCos Hiperface encoder, IP65, 8.4 in length.","salesMarkdown":"## 640 W servo with integrated holding brake The SH30702M02F1200 is a three-phase servo motor from the Schneider Electric SH3 family, delivering 640 W continuous power with a nominal torque profile that varies by supply voltage: 2.2 N·m at 115 V single phase, 2.15 N·m at 230 V single phase, and 2.03 N·m at both 400 V and 480 V three-phase supplies. An integrated holding brake provides 3 N·m of holding torque, which keeps the load locked in position when the drive is powered down — essential for vertical-axis applications where the load must not drift during a power loss or E-stop. The absolute multiturn SinCos Hiperface encoder eliminates the need for a home-find sequence on power-up; the drive knows the exact shaft position and number of revolutions from the moment the bus voltage comes up, cutting cycle time on machines that power-cycle between batches. ## Speed and torque across the voltage range Nominal speed depends on the supply: 750 rpm at 115 V single phase, 1500 rpm at 230 V single phase, 3000 rpm at 400 V three phase, and 3600 rpm at 480 V three phase — the motor is wound to deliver rated torque across a wide voltage window, so the same part number can be used on 400 V European lines and 480 V North American lines without a rewind. Peak stall torque reaches 7.6 N·m across the 115–480 V three-phase range, giving a 3.7× overload margin above the continuous stall torque of 2.04 N·m — enough headroom for acceleration transients in pick-and-place or indexing applications without tripping the drive's current limit. Maximum mechanical speed is 8000 rpm, well above the nominal speed at any voltage, so the motor can be over-sped for rapid-traverse moves as long as the drive's velocity loop is tuned to stay within the bearing and rotor limits. ## Mounting, cooling, and environmental sealing The motor mounts on an international standard flange with a 70 mm square pilot and 60 mm centring collar — a common IEC frame size that fits standard gearbox input flanges without an adapter plate. Cooling is by natural convection only — no external fan or forced air required — which simplifies installation in clean-room or dust-sensitive environments but means the continuous torque rating assumes free airflow around the housing; derate if the motor is enclosed in a tight shroud. IP65 on the motor body and shaft bushing, with IP67 on the housing — the motor withstands washdown sprays and hose-directed water, making it suitable for food-processing or washdown zones where a standard IP54 servo would fail the seal. ## Electrical interface and connector options The motor ships with both a rotatable right-angled connector and a straight connector option, giving the installer flexibility to route the power and feedback cable in tight cable-tray bends or against a panel wall without stressing the connector body. Stator resistance is 16.4 Ω and inductance is 115.7 mH — these values matter for the drive's current-loop tuning; the drive autotune routine should be run on first commissioning to measure the actual winding parameters and compensate for cable length. The torque constant is 1.36 N·m/A at 120 °C copper temperature, and the back-EMF constant is 95.9 V/krpm at 20 °C — these are the numbers the drive uses to calculate the motor's electrical angle and to set the current limit for the target torque.","metaTitle":"Schneider Electric SH30702M02F1200 Servo Motor, 640 W","metaDescription":"Schneider Electric SH30702M02F1200 servo motor with brake. 640 W continuous power, 3 N·m holding torque, absolute multiturn encoder, IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.4 in (212.5 mm)","Key width":"0.2 in (4 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.482 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"19.5 lbf.in (2.2 N.m) 115 V single phase 19.03 lbf.in (2.15 N.m) 230 V single phase 17.97 lbf.in (2.03 N.m) 400 V three phase 17.97 lbf.in (2.03 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"1.36 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"640 W","Mounting Support":"International standard flange","Sizing reference":"SH30702M","Back emf constant":"95.9 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"115.7 mH","Stator resistance":"16.4 Ohm","Maximum current Irms":"6 A","Nominal output power":"700 W 115 V single phase 340 W 230 V single phase 660 W 400 V three phase 780 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.5 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/52e45201bc39b5779adf30483c9b8967.pdf","sourceUrl":"https://www.se.com/us/en/product/SH30702M02F1200/sh3-servomotor-70mm-2-stacks-high-torque-smooth-shaft-sincos-multiturn-128-brake-straight-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702M02F1200/alternatives.json"},"ai":{"faq":[{"question":"What encoder type does SH30702M02F1200 use?","answer":"It uses an absolute multiturn SinCos Hiperface encoder. This encoder type provides absolute position over multiple revolutions without battery backup, so the drive knows the shaft position immediately on power-up — no homing sequence needed."},{"question":"What is the holding torque of the brake on SH30702M02F1200?","answer":"The integrated holding brake provides 3 N·m (26.6 lbf·in) of holding torque. This is sufficient to hold a vertical load of approximately 30 kg at a 100 mm radius arm, assuming a 2:1 safety factor."},{"question":"What IP rating does SH30702M02F1200 have?","answer":"The motor body and shaft bushing are rated IP65, and the housing is rated IP67, both conforming to IEC 60034-5. This means the motor is protected against dust ingress and low-pressure water jets (IP65), with the housing additionally protected against temporary immersion (IP67)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702M02F1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702M02F1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}