{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702M02F2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702M02F2000","canonicalUrl":"https://aoctrl.com/schneider/SH30702M02F2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702M02F2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH30702M02F2000, 640 W continuous power, 3 N·m holding torque, absolute multiturn SinCos Hiperface encoder, IP54/IP65, smooth shaft.","salesMarkdown":"## Speed range: 750–3600 rpm depending on supply The SH30702M02F2000: This motor's nominal speed shifts with the input voltage — 750 rpm on 115 V single-phase, 1500 rpm on 230 V single-phase, 3000 rpm on 400 V three-phase, and 3600 rpm on 480 V three-phase. That means the same part number covers different line voltages, but the torque and power you get out changes. If your line is 400 V three-phase, you're looking at 660 W nominal output power at 3000 rpm; on 480 V three-phase that climbs to 780 W at 3600 rpm. The continuous power rating is 640 W — that's the thermal limit the motor can sustain with natural convection cooling, no external fan needed. ## Torque numbers that matter for sizing Holding torque is 3 N·m — that's the brake's rated static torque, enough to keep a vertical load from dropping when power is removed. Nominal torque depends on supply: 2.2 N·m at 115 V single-phase, 2.15 N·m at 230 V single-phase, 2.03 N·m at both 400 V and 480 V three-phase. Peak stall torque is 7.6 N·m across the three-phase range — that's the short-term overload capability for acceleration or overcoming friction. Continuous stall torque sits at 2.04 N·m, which tells you the motor can hold that torque indefinitely without overheating. ## Encoder and feedback — what the Hiperface means The encoder is an absolute multiturn SinCos Hiperface type. That's a sine-cosine encoder with a serial communication channel for absolute position — it tells the drive the exact rotor position on power-up, no homing sequence needed. Multiturn means it tracks more than one revolution, so it remembers position even if the machine moves while powered off. This encoder type pairs with Schneider's Lexium drives and many third-party servo drives that support the Hiperface protocol. The motor has 3 poles, so the electrical cycle matches the mechanical rotation at a 3:2 ratio. ## Mounting, cooling, and environmental fit The flange is the international standard 70 mm size with a 60 mm centring collar and 2.5 mm collar depth. Four mounting holes at 5.5 mm diameter on a standard bolt circle. The shaft is 11 mm diameter, 23 mm long, smooth (no keyway) — that means you need a clamping-type coupling or a set-screw hub that grips the smooth surface. Cooling is natural convection, so no fan or forced air required — keep the motor body clear for airflow. IP rating depends on the shaft seal: IP54 without the shaft seal ring, IP65 with it. For washdown environments, spec the sealed version; for dry cabinet mounting, the IP54 is fine. ## Electrical connections and wiring The motor comes with a straight connector as standard, and a rotatable right-angle connector is also available — useful when cable clearance is tight in the panel or machine frame. Maximum current is 6 A RMS, continuous stall current is 1.5 A. Stator resistance is 16.4 ohms, inductance is 115.7 mH — these numbers matter for the drive's tuning parameters and current-loop bandwidth. The torque constant is 1.36 N·m/A at 120 °C copper temperature, and the back EMF constant is 95.9 V/krpm at 20 °C. Maximum mechanical speed is 8000 rpm — don't overspeed beyond that, the rotor can't take it.","metaTitle":"Schneider Electric SH30702M02F2000 Servo Motor with Brake","metaDescription":"Schneider Electric SH30702M02F2000 SH3 servo motor with brake, 640 W continuous, 3 N·m holding torque, absolute multiturn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.4 in (212.5 mm)","Key width":"0.2 in (4 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.482 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"19.5 lbf.in (2.2 N.m) 115 V single phase 19.03 lbf.in (2.15 N.m) 230 V single phase 17.97 lbf.in (2.03 N.m) 400 V three phase 17.97 lbf.in (2.03 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"1.36 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"640 W","Mounting Support":"International standard flange","Sizing reference":"SH30702M","Back emf constant":"95.9 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"115.7 mH","Stator resistance":"16.4 Ohm","Maximum current Irms":"6 A","Nominal output power":"700 W 115 V single phase 340 W 230 V single phase 660 W 400 V three phase 780 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.5 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/d797f3110a06b198ad19587c74532aaa.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH30702M02F2000/sh3-servomotor-70mm-2-stacks-high-torque-smooth-shaft-sincos-multiturn-128-brake-angular-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702M02F2000/alternatives.json"},"ai":{"faq":[{"question":"What supply voltages does SH30702M02F2000 work with?","answer":"The motor runs on 115 V single-phase, 230 V single-phase, 400 V three-phase, or 480 V three-phase. Nominal speed and output power change with the supply — for example, 3000 rpm at 660 W on 400 V three-phase, or 3600 rpm at 780 W on 480 V three-phase."},{"question":"What encoder type does this servo motor use?","answer":"It uses an absolute multiturn SinCos Hiperface encoder. That means it provides absolute position feedback over multiple revolutions via a sine-cosine analog signal plus a serial digital channel — no homing required on power-up."},{"question":"How can I order SH30702M02F2000 or check availability?","answer":"Submit an RFQ for current pricing and lead time — availability is confirmed at quote time."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702M02F2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702M02F2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}