{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702M02F2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702M02F2100","canonicalUrl":"https://aoctrl.com/schneider/SH30702M02F2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702M02F2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30702M02F2100 SH3 servo motor with brake, three-phase, 640 W continuous power, IP65, absolute multiturn SinCos Hiperface encoder, 70 mm flange, smooth shaft.","salesMarkdown":"## Motor specs and what they mean for your axis The SH30702M02F2100 is a three-phase servo motor from the SH3 family, delivering 640 W continuous power with a nominal torque range of 17.97 to 19.5 lbf.in depending on the supply voltage (115 V single-phase through 480 V three-phase). That torque spread means the motor's output is voltage-dependent — if you're running it on a 480 V three-phase line, expect 17.97 lbf.in nominal; on 115 V single-phase, you get the full 19.5 lbf.in. Peak stall torque hits 67.3 lbf.in (7.6 N.m) across the 115 to 480 V three-phase range, so it can handle short-duration overloads for acceleration or reversing without dropping out of sync. The holding brake delivers 26.6 lbf.in (3 N.m) static torque — enough to hold a vertical axis load at rest without power to the motor windings, which is the whole point of a brake motor on a pick-and-place or gantry. ## Encoder and feedback — absolute multiturn Hiperface The encoder is an absolute multiturn SinCos Hiperface type, which means it tracks position through multiple shaft revolutions even after a power cycle — no homing routine needed on startup. This is the feedback you want on a machine that must resume operation from a known position after a power loss or emergency stop. The SinCos analog track gives high-resolution interpolation for smooth low-speed control, while the Hiperface protocol carries the absolute position data over a single cable pair — keeps the cable count down on a moving axis. ## Mounting, cooling, and environmental fit The motor mounts on an international standard flange with a 70 mm (2.8 in) square pattern and a 60 mm centring collar — drops into the same bolt circle as many common servo frames, so a retrofit into an existing machine bed is straightforward if the old motor used a 60 mm pilot. Cooling is by natural convection — no fan, so no forced-air noise or filter maintenance, but the thermal budget is limited to the housing surface area. The continuous stall current is 1.5 A, and the stator resistance is 16.4 ohm, so the I²R heat at stall is about 37 W — the housing sheds that without a blower in a clean ambient. IP65 on both the motor body and the shaft bushing means it handles washdown spray and airborne dust — suitable for food processing, packaging, or any line where you hose down the machine between batches. No official successor or cross-reference is recorded — this is the current build, not a legacy part.","metaTitle":"Schneider Electric SH30702M02F2100 Servo Motor with Brake","metaDescription":"Schneider Electric SH30702M02F2100 servo motor with brake, 640 W continuous power, IP65, absolute multiturn encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.4 in (212.5 mm)","Key width":"0.2 in (4 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.482 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"19.5 lbf.in (2.2 N.m) 115 V single phase 19.03 lbf.in (2.15 N.m) 230 V single phase 17.97 lbf.in (2.03 N.m) 400 V three phase 17.97 lbf.in (2.03 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"1.36 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"640 W","Mounting Support":"International standard flange","Sizing reference":"SH30702M","Back emf constant":"95.9 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"115.7 mH","Stator resistance":"16.4 Ohm","Maximum current Irms":"6 A","Nominal output power":"700 W 115 V single phase 340 W 230 V single phase 660 W 400 V three phase 780 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.5 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/98372f19a496725b47d3cc65217df980.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH30702M02F2100/sh3-servomotor-70mm-2-stacks-high-torque-smooth-shaft-sincos-multiturn-128-brake-angular-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702M02F2100/alternatives.json"},"ai":{"faq":[{"question":"How do I get current pricing and availability for SH30702M02F2100?","answer":"No stock-holding claim is made here; the part is sourced per order."},{"question":"What does the absolute multiturn SinCos Hiperface encoder mean for my application?","answer":"The absolute multiturn encoder retains position through multiple shaft revolutions even after power loss, so the machine can resume operation without a homing cycle. The SinCos analog track provides high-resolution feedback for smooth low-speed control, and the Hiperface protocol carries position data over a single cable pair."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702M02F2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702M02F2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}