{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702M02F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702M02F2200","canonicalUrl":"https://aoctrl.com/schneider/SH30702M02F2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702M02F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH30702M02F2200, 640 W continuous power, 2.2 N.m nominal torque, 3 N.m holding brake, absolute multiturn SinCos Hiperface encoder, IP65/IP67, three-phase.","salesMarkdown":"The SH30702M02F2200 is a 640 W three-phase servo motor with an integrated holding brake — the brake holds 3 N.m (26.6 lbf.in) static, so vertical-axis loads stay put when the drive removes power; no external brake resistor needed. Nominal speed depends entirely on what voltage you feed it: 750 rpm at 115 V single-phase, 1500 rpm at 230 V single-phase, 3000 rpm at 400 V three-phase, or 3600 rpm at 480 V three-phase. If your line runs 400 V three-phase, budget for 3000 rpm rated speed — the motor doesn't pick one; the drive input sets it. Same story with nominal torque: 2.2 N.m at 115 V single-phase, 2.03 N.m at 400/480 V three-phase. Peak stall torque across the three-phase range is 7.6 N.m — that's the short-term grunt for acceleration or overcoming a jam before the drive current limit clips it. The absolute multiturn SinCos Hiperface encoder means no homing sequence on power-up — the motor knows its position through a power cycle. That saves a minute per axis on every startup; in a multi-axis line that adds up fast. ## Mounting and environmental fit Motor flange size is 70 mm (2.8 in) international standard flange — bolts to a standard 70 mm face; centring collar is 60 mm diameter, 2.5 mm deep. Four mounting holes at 5.5 mm diameter on the bolt circle. Shaft is 11 mm diameter, 23 mm long, smooth (no keyway). Key width on the flat is 4 mm. Maximum radial force at the shaft nose is 710 N at 1000 rpm, dropping to 390 N at 6000 rpm — keep belt tension or direct-coupling loads within that envelope. IP65 on the motor body and shaft bushing, IP67 on the housing — this motor takes washdown. If your line sees hose spray (food, beverage, wash-down zones), the IP67 housing seal handles it; the shaft bushing is the weaker link at IP65, so avoid direct jet spray at the shaft exit. Cooling is natural convection — no fan. That means the 640 W continuous rating assumes free air around the housing; if it's boxed in or mounted to a hot surface, derate or add forced air. ## Sourcing and lifecycle — active, quoted to order Sourced through independent distribution against an RFQ. The encoder type (Hiperface) and brake voltage should match your drive's feedback and brake output; confirm those at order.","metaTitle":"Schneider Electric SH30702M02F2200 Servo Motor with Brake","metaDescription":"Schneider Electric SH30702M02F2200 SH3 servo motor with holding brake, 640 W continuous, 3 N.m brake torque, IP65, active production. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.4 in (212.5 mm)","Key width":"0.2 in (4 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.482 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"19.5 lbf.in (2.2 N.m) 115 V single phase 19.03 lbf.in (2.15 N.m) 230 V single phase 17.97 lbf.in (2.03 N.m) 400 V three phase 17.97 lbf.in (2.03 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"1.36 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"640 W","Mounting Support":"International standard flange","Sizing reference":"SH30702M","Back emf constant":"95.9 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"115.7 mH","Stator resistance":"16.4 Ohm","Maximum current Irms":"6 A","Nominal output power":"700 W 115 V single phase 340 W 230 V single phase 660 W 400 V three phase 780 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.5 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/353782b8f4a45554fc2247f0f6d5ae9a.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH30702M02F2200/sh3-servomotor-70mm-2-stacks-high-torque-smooth-shaft-sincos-multiturn-128-brake-angular-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702M02F2200/alternatives.json"},"ai":{"faq":[{"question":"What compliance documentation does Schneider provide for SH30702M02F2200?","answer":"The motor carries IP65/IP67 ratings conforming to IEC 60034-5. Standard Schneider documentation for the SH3 series includes RoHS and REACH declarations; the specific certificate pack is available on request with the order."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702M02F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702M02F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}