{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702M11A1000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702M11A1000","canonicalUrl":"https://aoctrl.com/schneider/SH30702M11A1000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702M11A1000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30702M11A1000, three-phase, 640 W continuous power, 3000 rpm at 400 V, absolute single-turn SinCos Hiperface encoder, IP54/IP65, without brake.","salesMarkdown":"## Motor ratings and speed range The SH30702M11A1000 is a three-phase servo motor from the SH3 series, delivering 640 W continuous power. Its nominal speed depends on the supply: 750 rpm at 115 V single-phase, 1500 rpm at 230 V single-phase, 3000 rpm at 400 V three-phase, and 3600 rpm at 480 V three-phase — so the same motor covers both low-speed and high-speed lines depending on the drive voltage. Nominal torque also shifts with voltage: 2.2 N.m at 115 V single-phase, 2.15 N.m at 230 V single-phase, and 2.03 N.m at both 400 V and 480 V three-phase. Peak stall torque reaches 7.6 N.m across the 115–480 V three-phase range, giving headroom for acceleration transients. ## Encoder and feedback The motor carries an absolute single-turn SinCos Hiperface encoder — a standard feedback interface for servo drives that provides position at power-up without a homing cycle. The single-turn resolution is sufficient for applications that do not need multi-turn counts, such as indexing tables or pick-and-place axes. ## Mounting and environmental protection Mounting uses an international standard flange with a 70 mm flange size and a 60 mm centring collar. The IP degree of protection is IP54 at the shaft bushing without a shaft seal ring, and IP65 on the motor body and with the shaft seal ring fitted — so the motor can handle washdown zones if the seal is installed. Cooling is by natural convection — no external fan, so the motor relies on its own surface area and mounting plate for heat dissipation. The continuous stall current is 1.5 A, and the maximum continuous current is 6.0 A (3 s peak).","metaTitle":"Schneider Electric SH30702M11A1000 Servo Motor, 640 W","metaDescription":"Schneider Electric SH30702M11A1000 SH3 servo motor, 640 W continuous, 3000 rpm at 400 V three-phase, absolute single-turn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"7.4 in (187 mm)","Inertia":"0.0 kg.cm² of brake 0.41 kg.cm² of motor","Key width":"0.2 in (4 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.41 kg.cm²","Nominal torque":"19.5 lbf.in (2.2 N.m) 115 V single phase 19.03 lbf.in (2.15 N.m) 230 V single phase 17.97 lbf.in (2.03 N.m) 400 V three phase 17.97 lbf.in (2.03 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"1.36 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"640 W","Mounting Support":"International standard flange","Sizing reference":"SH30702M","Back emf constant":"95.9 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"41.55 mH","Stator resistance":"16.4 Ohm","Maximum current Irms":"6.0 A","Nominal output power":"700 W 115 V single phase 340 W 230 V single phase 660 W 400 V three phase 780 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Output current 3s peak":"6.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.5 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/239a63005daa950104a2a6bdc5695493.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH30702M11A1000/sh3-servomotor-70mm-2-stacks-high-torque-keyed-shaft-sincos-singleturn-128-no-brake-straight-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702M11A1000/alternatives.json"},"ai":{"faq":[{"question":"What compliance documentation does Schneider provide for SH30702M11A1000?","answer":"The evidence does not list specific compliance certificates (RoHS, REACH, UL, IEC) for this order code. Standard Schneider servo motors typically carry CE and UL markings; confirm the required documentation at RFQ."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702M11A1000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702M11A1000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}