{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702M11A1100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702M11A1100","canonicalUrl":"https://aoctrl.com/schneider/SH30702M11A1100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702M11A1100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30702M11A1100, 640 W continuous power, 3000 rpm at 400 V three-phase, IP65, absolute single-turn SinCos Hiperface encoder, without holding brake.","salesMarkdown":"## Speed-torque envelope depends on your supply voltage The SH30702M11A1100: This SH3 servo motor delivers 3000 rpm at 400 V three-phase, but the same motor spins at 750 rpm on 115 V single-phase or 1500 rpm on 230 V single-phase — the nominal speed is supply-dependent, not a fixed rating. Nominal torque also shifts with voltage: 2.2 N.m at 115 V single-phase drops to 2.03 N.m at 400 V three-phase, so the application's torque demand at the target speed must be checked against the voltage-specific curve. Continuous power is 640 W, with peak stall torque of 7.6 N.m available across the 115-480 V three-phase range — useful for acceleration transients but not sustained duty. ## Encoder feedback and connector choices The absolute single-turn SinCos Hiperface encoder provides position feedback at power-up without a homing cycle — the drive must support this protocol, and the cable set must be shielded for the SinCos signals. Two connector options are listed: a rotatable right-angle connector and a straight connector — the right-angle version saves clearance in shallow cabinets, while the straight connector simplifies cable strain relief. No holding brake is fitted — for vertical-axis loads or safety-hold applications, an external brake must be added to the mechanical train. ## IP65 rating and mechanical limits at speed IP65 protection on both the motor body and shaft bushing per IEC 60034-5 means the motor withstands hose-directed water — the connector O-ring is the critical seal point during washdown. Maximum radial force on the shaft drops from 710 N at 1000 rpm to 390 N at 6000 rpm — a belt-driven load must be sized for the actual operating speed, not the static rating. Maximum axial force is 80 N — direct-couple the load rather than using a helical coupling that generates axial thrust. ## Sourcing and lifecycle — active production No official successor or cross-reference is recorded — the SH30702M11A1100 is the current production variant in the SH3 family.","metaTitle":"Schneider Electric SH30702M11A1100 Servo Motor, 640 W","metaDescription":"Schneider Electric SH30702M11A1100 SH3 servo motor, 640 W continuous power, 3000 rpm at 400 V three-phase. IP65, absolute SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"7.4 in (187 mm)","Inertia":"0.0 kg.cm² of brake 0.41 kg.cm² of motor","Key width":"0.2 in (4 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.41 kg.cm²","Nominal torque":"19.5 lbf.in (2.2 N.m) 115 V single phase 19.03 lbf.in (2.15 N.m) 230 V single phase 17.97 lbf.in (2.03 N.m) 400 V three phase 17.97 lbf.in (2.03 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"1.36 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"640 W","Mounting Support":"International standard flange","Sizing reference":"SH30702M","Back emf constant":"95.9 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"41.55 mH","Stator resistance":"16.4 Ohm","Maximum current Irms":"6.0 A","Nominal output power":"700 W 115 V single phase 340 W 230 V single phase 660 W 400 V three phase 780 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Output current 3s peak":"6.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.5 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/4f340983418cdd680842e114c1f525e4.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH30702M11A1100/sh3-servomotor-70mm-2-stacks-high-torque-keyed-shaft-sincos-singleturn-128-no-brake-straight-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702M11A1100/alternatives.json"},"ai":{"faq":[{"question":"What is the closest alternative to SH30702M11A1100 in the SH3 family?","answer":"No official pin-compatible alternative is recorded for this exact order code. The SH30702M11A1100 is the current production variant; any replacement would require reviewing the sizing reference SH30702M and matching the flange size, encoder type, and voltage-specific torque curve."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702M11A1100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702M11A1100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}