{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702M11A2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702M11A2000","canonicalUrl":"https://aoctrl.com/schneider/SH30702M11A2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702M11A2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30702M11A2000, 640 W continuous power, three-phase, 3000 rpm at 400 V, absolute single-turn SinCos Hiperface encoder, IP65, without holding brake.","salesMarkdown":"## Supply-dependent torque and speed — the key selection table The SH30702M11A2000 is a 640 W continuous-duty servo motor from the SH3 series, and its output torque and speed are tied directly to the supply voltage and phase configuration — not a single fixed rating. On a 400 V three-phase line, nominal speed is 3000 rpm with nominal torque of 17.97 lbf.in (2.03 N·m). At 480 V three-phase, speed rises to 3600 rpm at the same torque figure. Single-phase 115 V yields 750 rpm at 19.5 lbf.in (2.2 N·m); 230 V single-phase gives 1500 rpm at 19.03 lbf.in (2.15 N·m). Peak stall torque reaches 67.3 lbf.in (7.6 N·m) across the 115–480 V three-phase range, while continuous stall torque is 18.06 lbf.in (2.04 N·m) over the same range — the peak-to-continuous ratio is roughly 3.7:1, which matters for acceleration duty cycles. ## Encoder, feedback, and connection — what the Hiperface interface means The motor carries an absolute single-turn SinCos Hiperface encoder — this is a digital-plus-analog interface that transmits absolute position within one revolution and sinusoidal analog tracks for high-resolution interpolation. It is not a multi-turn encoder, so the controller must handle revolution counting if the application needs absolute position across multiple turns. Electrical connection options include a straight connector and a rotatable right-angled connector — both are factory-fitted, not field-swappable, so the cable exit orientation must be specified at order time. ## Thermal and mechanical limits for the mounting engineer Cooling is natural convection only — no integrated fan. The motor relies on the machine frame or external airflow for heat rejection. Continuous stall current is 1.5 A, and the maximum continuous RMS current is 6.0 A; the 3-second peak current is also 6.0 A, meaning the drive's current limit should be set to this value to avoid demagnetisation. Maximum radial force Fr is load-dependent: 710 N at 1000 rpm, dropping to 390 N at 6000 rpm. Maximum axial force Fa is 80 N. These limits govern belt-tension and direct-coupling sizing — exceeding them shortens bearing life. ## IP rating and shaft seal — washdown vs dry-environment fit The motor carries IP54 at the shaft bushing without a shaft seal ring, and IP65 overall when the shaft bushing is sealed. The IP65 rating applies to the motor body and the shaft bushing with the seal ring fitted — this is a standard IEC 60034-5 classification, meaning dust-tight and protected against low-pressure water jets. Without the shaft seal ring, the bushing drops to IP54 (splash protection only).","metaTitle":"Schneider Electric SH30702M11A2000 Servo Motor, 640 W","metaDescription":"Schneider Electric SH30702M11A2000 SH3 servo motor, 640 W continuous, 3-phase, 3000 rpm at 400 V. Absolute single-turn Hiperface encoder. IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"7.4 in (187 mm)","Inertia":"0.0 kg.cm² of brake 0.41 kg.cm² of motor","Key width":"0.2 in (4 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.41 kg.cm²","Nominal torque":"19.5 lbf.in (2.2 N.m) 115 V single phase 19.03 lbf.in (2.15 N.m) 230 V single phase 17.97 lbf.in (2.03 N.m) 400 V three phase 17.97 lbf.in (2.03 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"1.36 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"640 W","Mounting Support":"International standard flange","Sizing reference":"SH30702M","Back emf constant":"95.9 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"41.55 mH","Stator resistance":"16.4 Ohm","Maximum current Irms":"6.0 A","Nominal output power":"700 W 115 V single phase 340 W 230 V single phase 660 W 400 V three phase 780 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Output current 3s peak":"6.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.5 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/b109cd1672cc6930930e3b73b346be74.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH30702M11A2000/sh3-servomotor-70mm-2-stacks-high-torque-keyed-shaft-sincos-singleturn-128-no-brake-angular-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702M11A2000/alternatives.json"},"ai":{"faq":[{"question":"What is the lead time and how can I order the SH30702M11A2000?","answer":"Submit an RFQ through the storefront; the part is sourced from authorised distribution and quoted to order."},{"question":"What is the SH30702M11A2000's encoder type and what does it mean for the drive interface?","answer":"It uses an absolute single-turn SinCos Hiperface encoder. This provides absolute position within one revolution plus sinusoidal analog tracks for high-resolution interpolation. The drive must support the Hiperface protocol — it is not a standard incremental or EnDat interface."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702M11A2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702M11A2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}