{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702M11A2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702M11A2100","canonicalUrl":"https://aoctrl.com/schneider/SH30702M11A2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702M11A2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 servo motor, SH30702M11A2100, 640 W continuous power, 3000 rpm at 400 V three-phase, 2.2 N.m nominal torque, IP65, absolute single-turn SinCos Hiperface encoder, without holding brake.","salesMarkdown":"## Motor ratings and supply-voltage dependency The SH30702M11A2100 is a three-phase servo motor from the SH3 series, rated for 640 W continuous power. Its nominal speed and torque vary with the supply voltage: at 400 V three-phase it delivers 3000 rpm and 2.03 N.m; at 480 V three-phase it reaches 3600 rpm and 2.03 N.m; under 115 V single-phase it runs at 750 rpm with 2.2 N.m. The motor is cooled by natural convection, so no forced-air or liquid cooling is required — a factor for enclosure thermal design. ## Encoder and feedback — drive compatibility The motor is equipped with an absolute single-turn SinCos Hiperface encoder. This feedback type is widely supported by Schneider Electric's Lexium drive family and many third-party servo drives; confirm the drive's encoder interface supports Hiperface before specifying. The electrical connection uses a rotatable right-angled connector, which simplifies cable routing in tight cabinets. ## Mechanical interface and mounting The motor mounts via an international standard flange (70 mm flange size, 60 mm centring collar diameter) with a parallel key shaft end (11 mm shaft diameter, 23 mm shaft length). The centring collar depth is 2.5 mm. Maximum radial force at the shaft is 710 N at 1000 rpm, derating to 390 N at 6000 rpm; maximum axial force is 80 N. These limits govern belt-drive or direct-coupling design. ## Environmental protection and compliance Both the motor body and the shaft bushing are rated IP65 per IEC 60034-5, making the unit suitable for washdown environments and dusty industrial floors.","metaTitle":"Schneider Electric SH30702M11A2100 SH3 Servo Motor, 640 W","metaDescription":"Schneider Electric SH30702M11A2100 SH3 servo motor, 640 W continuous power, 3000 rpm at 400 V three-phase, IP65, absolute single-turn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"7.4 in (187 mm)","Inertia":"0.0 kg.cm² of brake 0.41 kg.cm² of motor","Key width":"0.2 in (4 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.41 kg.cm²","Nominal torque":"19.5 lbf.in (2.2 N.m) 115 V single phase 19.03 lbf.in (2.15 N.m) 230 V single phase 17.97 lbf.in (2.03 N.m) 400 V three phase 17.97 lbf.in (2.03 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"1.36 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"640 W","Mounting Support":"International standard flange","Sizing reference":"SH30702M","Back emf constant":"95.9 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"41.55 mH","Stator resistance":"16.4 Ohm","Maximum current Irms":"6.0 A","Nominal output power":"700 W 115 V single phase 340 W 230 V single phase 660 W 400 V three phase 780 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Output current 3s peak":"6.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.5 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/31547b0b2819d54dd6d3c0b341cf1d5b.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH30702M11A2100/servo-motor-sh3-070-22nmkeysinglenobrake90conn-ip65-ip658k-rpm/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702M11A2100/alternatives.json"},"ai":{"faq":[{"question":"What is SH30702M11A2100's listed phase and nominal speed?","answer":"The motor is a three-phase design. Nominal speed depends on supply voltage: 3000 rpm at 400 V three-phase, 3600 rpm at 480 V three-phase, 750 rpm at 115 V single-phase, and 1500 rpm at 230 V single-phase."},{"question":"What compliance documentation is available for SH30702M11A2100?","answer":"The motor carries an IP65 rating per IEC 60034-5. For RoHS, REACH, and UL documentation, refer to the official Schneider Electric product page or request the declaration of conformity from the supplier."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702M11A2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702M11A2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}