{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702M11F1000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702M11F1000","canonicalUrl":"https://aoctrl.com/schneider/SH30702M11F1000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702M11F1000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 servo motor with brake, SH30702M11F1000, three-phase, 640 W continuous power, 3 N.m holding torque, absolute single-turn SinCos Hiperface encoder, IP65, 70 mm flange.","salesMarkdown":"## Three-phase servo with integrated holding brake The SH30702M11F1000 is a three-phase servo motor from Schneider Electric's SH3 series, delivering 640 W continuous power and 2.03 N.m nominal torque at 400 V three-phase supply. The integrated holding brake provides 3 N.m holding torque, making it a natural fit for vertical-axis loads where the load must stay put when power is removed. Nominal speed reaches 3000 rpm at 400 V three-phase, with a maximum mechanical speed of 8000 rpm — the motor has headroom for short-term overspeed moves. The absolute single-turn SinCos Hiperface encoder gives the drive position feedback at power-up without a homing sequence, saving cycle time on every restart. ## Torque and thermal envelope across supply voltages Nominal torque varies with the supply: 2.2 N.m at 115 V single-phase, 2.15 N.m at 230 V single-phase, and 2.03 N.m at both 400 V and 480 V three-phase. The continuous stall torque is 2.04 N.m across the three-phase range, with a continuous stall current of 1.5 A — the motor runs cool at rated load with natural convection cooling. Peak stall torque reaches 7.6 N.m at 115–480 V three-phase, giving a 3.7× overload capability for acceleration and deceleration. The torque constant is 1.36 N.m/A at 120 °C copper temperature, so the drive current loop scales linearly with commanded torque up to the 6 A maximum current limit. ## Mounting, sealing, and mechanical interface The motor uses an international standard flange with a 70 mm flange size and 60 mm centring collar. The shaft is 11 mm diameter with a parallel key, 23 mm shaft length, and 4 mm key width — standard for coupling to ball screws or timing-belt pulleys in this power class. IP protection is IP54 on the shaft bushing without the shaft seal ring, and IP65 on the motor body and with the shaft seal ring fitted. For washdown or wet environments, specify the shaft seal ring to keep coolant and chips out of the bearing cavity. The electrical connection uses a rotatable right-angled connector or straight connector — the installer can orient the cable exit to fit tight enclosure clearances.","metaTitle":"Schneider Electric SH30702M11F1000 Servo Motor, 640 W","metaDescription":"Schneider Electric SH30702M11F1000 SH3 servo motor with brake, 640 W continuous, 3 N.m holding torque, absolute Hiperface encoder, IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.4 in (212.5 mm)","Key width":"0.2 in (4 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.482 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"19.5 lbf.in (2.2 N.m) 115 V single phase 19.03 lbf.in (2.15 N.m) 230 V single phase 17.97 lbf.in (2.03 N.m) 400 V three phase 17.97 lbf.in (2.03 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"1.36 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"640 W","Mounting Support":"International standard flange","Sizing reference":"SH30702M","Back emf constant":"95.9 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"115.7 mH","Stator resistance":"16.4 Ohm","Maximum current Irms":"6 A","Nominal output power":"700 W 115 V single phase 340 W 230 V single phase 660 W 400 V three phase 780 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.5 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/8bdf913c6941ab155ed01c57bed07142.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH30702M11F1000/sh3-servomotor-70mm-2-stacks-high-torque-keyed-shaft-sincos-singleturn-128-brake-straight-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702M11F1000/alternatives.json"},"ai":{"faq":[{"question":"What is the holding torque of the SH30702M11F1000 brake?","answer":"The holding brake delivers 3 N.m (26.6 lbf.in) holding torque. This is the static torque the brake holds when the motor is de-energized — sufficient for vertical loads in the 640 W power class, but confirm the load's gravitational torque against this figure during sizing."},{"question":"What encoder type does the SH30702M11F1000 use?","answer":"It uses an absolute single-turn SinCos Hiperface encoder. This provides position feedback at power-up without a homing move, and the SinCos analog track gives high-resolution velocity feedback for the drive's current loop. The drive must support the Hiperface protocol — check compatibility with your motion controller."},{"question":"Is the SH30702M11F1000 suitable for washdown environments?","answer":"Yes, with the shaft seal ring fitted the motor achieves IP65 on the body and shaft bushing per IEC 60034-5. Without the seal ring the shaft bushing is IP54. For food processing or coolant-heavy machining centres, specify the seal ring and verify the connector is properly torqued to maintain the seal."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702M11F1000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702M11F1000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}