{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702M11F1100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702M11F1100","canonicalUrl":"https://aoctrl.com/schneider/SH30702M11F1100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702M11F1100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH30702M11F1100, 640 W continuous power, three-phase, IP65, absolute single-turn SinCos Hiperface encoder, holding brake.","salesMarkdown":"## Motor sizing and supply-voltage dependency The SH30702M11F1100 is a three-phase servo motor from the SH3 series, delivering 640 W continuous power with a nominal torque that shifts with the supply: 2.2 N.m at 115 V single phase, 2.15 N.m at 230 V single phase, and 2.03 N.m at both 400 V and 480 V three phase. Nominal speed also depends on the line: 750 rpm at 115 V single phase, 1500 rpm at 230 V single phase, 3000 rpm at 400 V three phase, and 3600 rpm at 480 V three phase. The maximum mechanical speed is 8000 rpm, providing headroom for transient overshoots. The continuous stall torque is 2.04 N.m across the 115–480 V three-phase range, while peak stall torque reaches 7.6 N.m — this gap defines the acceleration capability for short-duration moves. ## Encoder, brake, and environmental sealing An absolute single-turn SinCos Hiperface encoder eliminates the need for a homing cycle on power-up — the motor knows its position immediately after the drive powers up, which cuts commissioning time on multi-axis machines. The holding brake delivers 3 N.m of holding torque, enough to lock a vertical axis against gravity when the drive is disabled. The brake is factory-fitted and wired through the motor connector. ## Electrical parameters and drive tuning The torque constant is 1.36 N.m/A at 120 °C copper temperature, and the back-EMF constant is 95.9 V/krpm at 20 °C. These are the numbers the drive uses to calculate the current command for a given torque demand. Continuous stall current is 1.5 A, with a maximum RMS current of 6 A — the drive's current rating must cover the peak demand during acceleration, not just the continuous figure. ## Mechanical interface and mounting The motor uses an international standard flange with a 70 mm flange size and a 60 mm centring collar. The shaft is 11 mm diameter with a parallel key, 23 mm shaft length, and a 4 mm key width — standard for this power class. Overall length is 212.5 mm. The electrical connection is available as either a rotatable right-angled connector or a straight connector, giving flexibility in cable routing within a tight cabinet. Maximum radial force is 710 N at 1000 rpm, derating to 390 N at 6000 rpm. Maximum axial force is 80 N. These limits govern the allowable belt tension or direct-coupling misalignment.","metaTitle":"Schneider Electric SH30702M11F1100 Servo Motor with Brake","metaDescription":"Schneider Electric SH30702M11F1100 SH3 servo motor, 640 W continuous, 3-phase, IP65, holding brake, absolute SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.4 in (212.5 mm)","Key width":"0.2 in (4 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.482 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"19.5 lbf.in (2.2 N.m) 115 V single phase 19.03 lbf.in (2.15 N.m) 230 V single phase 17.97 lbf.in (2.03 N.m) 400 V three phase 17.97 lbf.in (2.03 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"1.36 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"640 W","Mounting Support":"International standard flange","Sizing reference":"SH30702M","Back emf constant":"95.9 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"115.7 mH","Stator resistance":"16.4 Ohm","Maximum current Irms":"6 A","Nominal output power":"700 W 115 V single phase 340 W 230 V single phase 660 W 400 V three phase 780 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.5 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/509c81646e76acf5456c30ee012b22e3.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH30702M11F1100/sh3-servomotor-70mm-2-stacks-high-torque-keyed-shaft-sincos-singleturn-128-brake-straight-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702M11F1100/alternatives.json"},"ai":{"faq":[{"question":"What is the holding brake torque on SH30702M11F1100?","answer":"The holding brake delivers 3 N.m (26.6 lbf.in) of holding torque, sufficient to secure a vertical axis when the drive is disabled."},{"question":"What encoder type does SH30702M11F1100 use?","answer":"It uses an absolute single-turn SinCos Hiperface encoder, which provides position feedback without a homing cycle on power-up."},{"question":"What is the IP rating of SH30702M11F1100?","answer":"Both the motor body and the shaft bushing are rated IP65 per IEC 60034-5, suitable for washdown and dusty environments."},{"question":"How is SH30702M11F1100 quoted for volume purchases?","answer":"Availability and volume pricing are confirmed at RFQ time."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702M11F1100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702M11F1100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}