{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702M11F1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702M11F1200","canonicalUrl":"https://aoctrl.com/schneider/SH30702M11F1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702M11F1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30702M11F1200 SH3 series servo motor with holding brake, 640 W continuous power, three-phase, absolute single-turn SinCos Hiperface encoder, IP65 motor, IP67 housing, 8.4 in length.","salesMarkdown":"## Motor ratings and supply matching The SH30702M11F1200: This SH3-series servo motor is a three-phase unit rated for 640 W continuous power, with nominal speed varying by supply voltage: 750 rpm at 115 V single phase, 1500 rpm at 230 V single phase, 3000 rpm at 400 V three phase, and 3600 rpm at 480 V three phase. The holding brake delivers 3 N.m (26.6 lbf.in) holding torque, and nominal torque ranges from 2.03 N.m to 2.2 N.m depending on the supply configuration — critical for sizing the load and confirming the drive's torque loop can hold position when power is removed. Peak stall torque reaches 7.6 N.m (67.3 lbf.in) across the 115–480 V three-phase range, and continuous stall torque is 2.04 N.m (18.06 lbf.in) — the motor can deliver short bursts for acceleration without exceeding thermal limits. ## Feedback and environmental protection The absolute single-turn SinCos Hiperface encoder provides position feedback without needing a homing cycle on power-up — the drive reads the exact rotor angle from the encoder's memory, which simplifies commissioning and reduces downtime after a power loss. Natural convection cooling (no fan) keeps the design simple and avoids debris buildup, but the thermal limit is set by the 130 °C copper hot-spot temperature — derate the duty cycle if ambient exceeds the standard operating range. ## Mechanical integration and shaft details The motor mounts on an international standard flange with a 70 mm (2.8 in) flange size, centring collar diameter 60 mm (2.4 in), and four mounting holes at 5.5 mm diameter — fits standard servo mounting patterns for direct coupling to a load. Shaft diameter is 11 mm (0.4 in) with a parallel key and 23 mm (0.9 in) shaft length — the keyed interface transmits torque without slipping, and the 4 mm key width matches common keyway broaching for pulleys or couplings.","metaTitle":"Schneider Electric SH30702M11F1200 Servo Motor with Brake","metaDescription":"Schneider Electric SH30702M11F1200 servo motor with brake, 640 W continuous power, 3-phase, IP65, absolute Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.4 in (212.5 mm)","Key width":"0.2 in (4 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.482 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"19.5 lbf.in (2.2 N.m) 115 V single phase 19.03 lbf.in (2.15 N.m) 230 V single phase 17.97 lbf.in (2.03 N.m) 400 V three phase 17.97 lbf.in (2.03 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"1.36 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"640 W","Mounting Support":"International standard flange","Sizing reference":"SH30702M","Back emf constant":"95.9 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"115.7 mH","Stator resistance":"16.4 Ohm","Maximum current Irms":"6 A","Nominal output power":"700 W 115 V single phase 340 W 230 V single phase 660 W 400 V three phase 780 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.5 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/d98190756376b4ecb5e8e453848cebf2.pdf","sourceUrl":"https://www.se.com/us/en/product/SH30702M11F1200/sh3-servomotor-70mm-2-stacks-high-torque-keyed-shaft-sincos-singleturn-128-brake-straight-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702M11F1200/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702M11F1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702M11F1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}