{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702M11F2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702M11F2000","canonicalUrl":"https://aoctrl.com/schneider/SH30702M11F2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702M11F2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 servo motor with brake, SH30702M11F2000, three phase, 640 W continuous power, 2.2 N.m nominal torque, 3 N.m holding brake, absolute single-turn SinCos Hiperface encoder, IP65.","salesMarkdown":"## Speed range and voltage dependency The SH30702M11F2000: This SH3 frame servo delivers 750 rpm on 115 V single-phase, 1500 rpm on 230 V single-phase, 3000 rpm on 400 V three-phase, and 3600 rpm on 480 V three-phase. The nominal torque holds steady at 2.2 N.m across the single-phase voltages, dropping slightly to 2.03 N.m on three-phase supplies — the torque curve is flat enough that the machine cycle won't shift when you swap supply configurations. Maximum mechanical speed is 8000 rpm, so the motor can overspeed the rated points for short-duration moves if the drive and load inertia allow it. ## Brake and encoder — what the techs need The holding brake delivers 3 N.m (26.6 lbf.in) — enough to hold a vertical axis or a conveyor stop without the drive holding torque. The brake is engaged when the motor is unpowered, so the load stays put on a power loss. Feedback comes from an absolute single-turn SinCos Hiperface encoder. Single-turn means the position is known within one revolution on power-up — no homing sequence needed for rotary tables or pick-and-place axes that don't need multi-turn tracking. The torque constant is 1.36 N.m/A at 120 °C copper temperature — that's the figure to use for the drive current loop tuning, not the cold value. ## Continuous power and thermal limits Continuous power is rated at 640 W, with nominal output power varying by supply: 700 W on 115 V single-phase, 340 W on 230 V single-phase, 660 W on 400 V three-phase, and 780 W on 480 V three-phase. The 640 W continuous figure is the safe thermal limit for the winding — the motor relies on natural convection cooling, so mounting it in a confined space or against a heat trap will reduce the usable duty cycle. Continuous stall torque is 2.04 N.m across the 115–480 V three-phase range, with a continuous stall current of 1.5 A. The peak stall torque reaches 7.6 N.m — about 3.7× the continuous rating — for acceleration and deceleration moves. ## Mounting and environmental fit The motor uses an international standard flange with a 70 mm (2.8 in) flange size and a 60 mm centring collar. The shaft is 11 mm diameter with a parallel key, 23 mm shaft length, and 4 mm key width — standard for this frame size, so pulleys and couplings are off-the-shelf items. The shaft bushing without seal ring is IP54, so if the application has direct spray on the shaft seal, specify the shaft seal ring option. Electrical connection is via a straight connector or a rotatable right-angled connector — the right-angle version helps in tight cable trays or when the motor is mounted close to a panel wall. ## Lifecycle and sourcing The sizing reference is SH30702M, so if you're replacing an existing SH30702M motor, confirm the connector type and brake voltage match this variant before committing the purchase order.","metaTitle":"Schneider Electric SH30702M11F2000 Servo Motor with Brake","metaDescription":"Schneider Electric SH30702M11F2000 SH3 servo motor with holding brake. 640 W continuous power, 3-phase, absolute single-turn Hiperface encoder. IP65 rated.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.4 in (212.5 mm)","Key width":"0.2 in (4 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.482 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"19.5 lbf.in (2.2 N.m) 115 V single phase 19.03 lbf.in (2.15 N.m) 230 V single phase 17.97 lbf.in (2.03 N.m) 400 V three phase 17.97 lbf.in (2.03 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"1.36 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"640 W","Mounting Support":"International standard flange","Sizing reference":"SH30702M","Back emf constant":"95.9 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"115.7 mH","Stator resistance":"16.4 Ohm","Maximum current Irms":"6 A","Nominal output power":"700 W 115 V single phase 340 W 230 V single phase 660 W 400 V three phase 780 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.5 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/0ff3325459de7297334b1a719d019acc.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH30702M11F2000/sh3-servomotor-70mm-2-stacks-high-torque-keyed-shaft-sincos-singleturn-128-brake-angular-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702M11F2000/alternatives.json"},"ai":{"faq":[{"question":"What is the holding torque of the brake on SH30702M11F2000?","answer":"The holding brake provides 3 N.m (26.6 lbf.in) of holding torque. This is sufficient to hold a vertical load or stop a conveyor section when power is removed."},{"question":"What encoder type does SH30702M11F2000 use?","answer":"It uses an absolute single-turn SinCos Hiperface encoder. Single-turn means absolute position within one revolution is known on power-up, eliminating the need for a homing cycle on rotary applications."},{"question":"What is the IP rating of SH30702M11F2000?","answer":"The motor body and shaft bushing are rated IP65 per IEC 60034-5, suitable for washdown environments. The shaft bushing without the shaft seal ring is IP54."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702M11F2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702M11F2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}