{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702M11F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702M11F2200","canonicalUrl":"https://aoctrl.com/schneider/SH30702M11F2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702M11F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 servo motor with holding brake, SH30702M11F2200, 640 W continuous power, 3-phase, absolute single-turn SinCos Hiperface encoder, IP65/IP67, 70 mm flange.","salesMarkdown":"## Speed-torque envelope and voltage dependency The SH30702M11F2200: The nominal speed of this SH3 frame servo varies with the supply voltage: 750 rpm at 115 V single-phase, 1500 rpm at 230 V single-phase, 3000 rpm at 400 V three-phase, and 3600 rpm at 480 V three-phase. The nominal torque also shifts with voltage — 19.5 lbf·in (2.2 N·m) at 115 V single-phase down to 17.97 lbf·in (2.03 N·m) at 400/480 V three-phase — so the drive parameterisation must match the actual line voltage to avoid torque margin error. Peak stall torque is 67.3 lbf·in (7.6 N·m) across the 115–480 V three-phase range, giving a 3.7× overload capability above the nominal torque at 400 V. The continuous stall torque is 18.06 lbf·in (2.04 N·m) at 1.5 A continuous stall current, which sets the thermal limit for holding applications. ## Encoder and feedback — absolute single-turn Hiperface The motor ships with an absolute single-turn SinCos Hiperface encoder. This is a single-turn device — it reports position within one revolution at power-up without a homing move, but loses multi-turn count across power cycles. For applications requiring absolute multi-turn position, a battery-backed or multi-turn encoder variant is needed. The back EMF constant is 95.9 V/krpm at 68 °F (20 °C), and the torque constant is 1.36 N·m/A at 248 °F (120 °C) copper hot. These values are needed to set the velocity loop gain and current loop limits in the drive commissioning software. ## Mechanical interface and environmental sealing The motor uses an international standard flange with a 70 mm flange size and a 60 mm centring collar. The shaft is 11 mm diameter with a parallel key, 23 mm shaft length, and 4 mm key width. Mounting holes are 5.5 mm diameter on the flange face. IP protection is rated IP65 on the motor body and shaft bushing, and IP67 on the housing per IEC 60034-5. The straight connector and rotatable right-angled connector options allow cable exit routing for tight enclosure layouts. Cooling is by natural convection — no external fan, so the thermal budget depends on the mounting surface and ambient airflow. ## Sourcing and lifecycle — active production The sizing reference is SH30702M, and the device short name is SH3. The motor is part of Schneider Electric's SH3 family of servo motors with holding brake, intended for precision motion control in packaging, material handling, and machine tool axes where a fail-safe brake is required to hold the load at power-off.","metaTitle":"Schneider Electric SH30702M11F2200 Servo Motor with Brake","metaDescription":"Schneider Electric SH30702M11F2200 SH3 servo motor with holding brake. 640 W continuous power, 8000 rpm max speed, absolute single-turn SinCos Hiperface","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.4 in (212.5 mm)","Key width":"0.2 in (4 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.482 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"19.5 lbf.in (2.2 N.m) 115 V single phase 19.03 lbf.in (2.15 N.m) 230 V single phase 17.97 lbf.in (2.03 N.m) 400 V three phase 17.97 lbf.in (2.03 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"1.36 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"640 W","Mounting Support":"International standard flange","Sizing reference":"SH30702M","Back emf constant":"95.9 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"115.7 mH","Stator resistance":"16.4 Ohm","Maximum current Irms":"6 A","Nominal output power":"700 W 115 V single phase 340 W 230 V single phase 660 W 400 V three phase 780 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.5 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/6c23319db9cc8b8e9e2153f7c06edf73.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH30702M11F2200/sh3-servomotor-70mm-2-stacks-high-torque-keyed-shaft-sincos-singleturn-128-brake-angular-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702M11F2200/alternatives.json"},"ai":{"faq":[{"question":"What is the maximum radial force the SH30702M11F2200 shaft can handle?","answer":"The maximum radial force Fr is speed-dependent: 710 N at 1000 rpm, 560 N at 2000 rpm, 490 N at 3000 rpm, 450 N at 4000 rpm, 410 N at 5000 rpm, and 390 N at 6000 rpm. The maximum axial force Fa is 80 N."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702M11F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702M11F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}