{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702M12A1000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702M12A1000","canonicalUrl":"https://aoctrl.com/schneider/SH30702M12A1000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702M12A1000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30702M12A1000, 640 W continuous power, three phase, absolute multiturn SinCos Hiperface encoder, 70 mm flange, without holding brake.","salesMarkdown":"## Active production, sized for your BOM The SH30702M12A1000: It's a three-phase servo motor from Schneider's SH3 family, rated for 640 W continuous power and built around a 70 mm international-standard flange that bolts directly to common gearbox and machine interfaces. ## Speed and torque vs. your supply rail This motor delivers different speed and torque depending on what voltage you feed it: 750 rpm at 115 V single phase, 1500 rpm at 230 V single phase, 3000 rpm at 400 V three phase, and 3600 rpm at 480 V three phase — so the same motor covers a 50 Hz or 60 Hz line without a hardware change. Nominal torque follows the same curve: 2.2 N·m at 115 V single phase, 2.15 N·m at 230 V single phase, and 2.03 N·m at both 400 V and 480 V three phase — meaning you lose about 8 % of rated torque when you run it on a 480 V line vs. a 115 V line, which matters when you're sizing the coupling for a constant-torque load like a conveyor. Peak stall torque is 7.6 N·m across the full 115–480 V three-phase range, so the motor has headroom for short acceleration bursts without tripping the drive's current limit. ## Encoder feedback and sealing for the line The feedback device is an absolute multiturn SinCos Hiperface encoder — that means you don't need a homing cycle after a power loss; the motor knows its exact shaft position on power-up, which saves cycle time on pick-and-place or rotary-indexing stations. IP rating depends on whether you fit the shaft seal ring: IP54 without it, IP65 with it — if this motor is going into a washdown area or a dusty environment, order the seal ring and confirm the mating connector is also IP65-rated to keep the bearing and encoder dry.","metaTitle":"Schneider Electric SH30702M12A1000 Servo Motor, 640 W","metaDescription":"Schneider Electric SH30702M12A1000 SH3 servo motor, 640 W continuous, 3-phase, absolute multiturn SinCos Hiperface encoder. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"7.4 in (187 mm)","Inertia":"0.0 kg.cm² of brake 0.41 kg.cm² of motor","Key width":"0.2 in (4 mm)","Shaft end":"Parallel key","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.41 kg.cm²","Nominal torque":"19.5 lbf.in (2.2 N.m) 115 V single phase 19.03 lbf.in (2.15 N.m) 230 V single phase 17.97 lbf.in (2.03 N.m) 400 V three phase 17.97 lbf.in (2.03 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"1.36 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"640 W","Mounting Support":"International standard flange","Sizing reference":"SH30702M","Back emf constant":"95.9 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"41.55 mH","Stator resistance":"16.4 Ohm","Maximum current Irms":"6.0 A","Nominal output power":"700 W 115 V single phase 340 W 230 V single phase 660 W 400 V three phase 780 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Output current 3s peak":"6.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.5 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e588336cf6d73b62946659af6dea0e09.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH30702M12A1000/sh3-servomotor-70mm-2-stacks-high-torque-keyed-shaft-sincos-multiturn-128-no-brake-straight-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702M12A1000/alternatives.json"},"ai":{"faq":[{"question":"Is SH30702M12A1000 available via RFQ confirmation and what is the lead time?","answer":"Submit an RFQ through the storefront; we source from authorized distribution and quote the lead time with the price."},{"question":"What phase is the SH30702M12A1000?","answer":"It's a three-phase motor, though it runs on single-phase supplies at reduced speed and torque — 750 rpm at 115 V single phase and 1500 rpm at 230 V single phase, for instance."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702M12A1000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702M12A1000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}