{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702M12A2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702M12A2000","canonicalUrl":"https://aoctrl.com/schneider/SH30702M12A2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702M12A2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30702M12A2000, 640 W continuous power, 3000 rpm nominal speed at 400 V three-phase, absolute multiturn SinCos Hiperface encoder, IP54/IP65, without holding brake.","salesMarkdown":"## 640 W SH3 servo — speed and torque across supply voltages The SH30702M12A2000 is a Schneider Electric SH3 series servo motor rated for 640 W continuous power, with a nominal speed that shifts depending on the supply: 750 rpm on 115 V single-phase, 1500 rpm on 230 V single-phase, 3000 rpm on 400 V three-phase, and 3600 rpm on 480 V three-phase. Nominal torque also varies by supply — 2.2 N.m at 115 V single-phase, 2.15 N.m at 230 V single-phase, and 2.03 N.m at both 400 V and 480 V three-phase — so the motor delivers consistent torque across a wide voltage range, with only a small drop at higher line voltages. Peak stall torque reaches 7.6 N.m across the 115...480 V three-phase range, and continuous stall torque is 2.04 N.m, giving a peak-to-continuous ratio of about 3.7:1 for short-duration overloads. ## Absolute multiturn Hiperface encoder — position feedback without homing The encoder is an absolute multiturn SinCos Hiperface type, meaning the drive knows the motor shaft position at power-up without needing a homing sequence — critical for applications where the machine must resume from a known position after a power cycle. Natural convection cooling means no fan noise or forced-air dependency, but the thermal limit is set by the copper hot-spot temperature of 130 °C — the continuous stall current of 1.5 A and maximum continuous current of 6.0 A define the thermal operating envelope. ## Mounting and mechanical interface — IEC flange, parallel key shaft Mounting uses an international standard flange with a 70 mm flange size and 60 mm centring collar diameter, fitting standard IEC frame patterns for servo motors in this power class. The shaft is 11 mm diameter with a parallel key, 23 mm shaft length, and 4 mm key width — a common interface for coupling to ball screws, timing belts, or direct loads. Electrical connection options include a straight connector or a rotatable right-angled connector, giving flexibility for cable routing in confined cabinets. ## IP protection and environmental limits The IP rating depends on the shaft seal configuration: IP54 at the shaft bushing without a shaft seal ring, and IP65 for the motor body and shaft bushing when the seal ring is fitted — both conforming to IEC 60034-5. Maximum radial force on the shaft drops with speed: 710 N at 1000 rpm down to 390 N at 6000 rpm, and maximum axial force is 80 N — these limits must be respected to avoid bearing damage. The torque constant is 1.36 N.m/A at 120 °C copper temperature, and the back EMF constant is 95.9 V/krpm at 20 °C — useful for matching the motor to the drive's voltage and current limits. ## Sourcing and lifecycle — current production, quoted to order No official successor or cross-reference is recorded — the SH30702M12A2000 is the active variant for this frame size and encoder type.","metaTitle":"Schneider Electric SH30702M12A2000 Servo Motor, 640 W","metaDescription":"Schneider Electric SH30702M12A2000 SH3 servo motor, 640 W continuous, 3000 rpm at 400 V three-phase, absolute multiturn Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"7.4 in (187 mm)","Inertia":"0.0 kg.cm² of brake 0.41 kg.cm² of motor","Key width":"0.2 in (4 mm)","Shaft end":"Parallel key","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.41 kg.cm²","Nominal torque":"19.5 lbf.in (2.2 N.m) 115 V single phase 19.03 lbf.in (2.15 N.m) 230 V single phase 17.97 lbf.in (2.03 N.m) 400 V three phase 17.97 lbf.in (2.03 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"1.36 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"640 W","Mounting Support":"International standard flange","Sizing reference":"SH30702M","Back emf constant":"95.9 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"41.55 mH","Stator resistance":"16.4 Ohm","Maximum current Irms":"6.0 A","Nominal output power":"700 W 115 V single phase 340 W 230 V single phase 660 W 400 V three phase 780 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Output current 3s peak":"6.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.5 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/75e44a48530158ea5cebf7e67816d10f.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH30702M12A2000/sh3-servomotor-70mm-2-stacks-high-torque-keyed-shaft-sincos-multiturn-128-no-brake-angular-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702M12A2000/alternatives.json"},"ai":{"faq":[{"question":"What is the nominal speed of SH30702M12A2000 at 400 V three-phase?","answer":"At 400 V three-phase supply, the nominal speed is 3000 rpm. The motor also runs at 750 rpm on 115 V single-phase, 1500 rpm on 230 V single-phase, and 3600 rpm on 480 V three-phase."},{"question":"Does SH30702M12A2000 include a holding brake?","answer":"No, this variant ships without a holding brake. The brake inertia is listed as 0.0 kg.cm², confirming no brake is fitted. If a brake is required, a different variant in the SH3 family would be needed."},{"question":"What encoder type does SH30702M12A2000 use?","answer":"It uses an absolute multiturn SinCos Hiperface encoder, which provides position feedback at power-up without requiring a homing sequence — ideal for applications needing absolute position retention."},{"question":"How can I order SH30702M12A2000 and check availability?","answer":"Submit an RFQ for current pricing and lead time confirmation."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702M12A2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702M12A2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}