{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702M12A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702M12A2200","canonicalUrl":"https://aoctrl.com/schneider/SH30702M12A2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702M12A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30702M12A2200, 640 W continuous power, 2.2 Nm nominal torque, 3000 rpm at 400 V three-phase, absolute multiturn SinCos Hiperface encoder, IP65/IP67, without holding brake.","salesMarkdown":"## Motor ratings and speed-torque envelope The SH30702M12A2200: This SH3-series servo delivers 640 W continuous power, with nominal torque ranging from 17.97 to 19.5 lbf.in (2.03–2.2 Nm) depending on supply voltage. The nominal speed varies from 750 rpm at 115 V single-phase up to 3600 rpm at 480 V three-phase, so the drive supply voltage directly sets the available speed range. Peak stall torque is 67.3 lbf.in (7.6 Nm) across the 115–480 V three-phase range, giving a 3.4× overload margin over the continuous stall torque of 2.04 Nm. The 6.0 A peak current (3 s rating) matches the drive's short-term current capability for acceleration moves. ## Feedback and environmental sealing The absolute multiturn SinCos Hiperface encoder provides position feedback without a home cycle after power loss — the multiturn count tracks absolute position over multiple shaft revolutions. This eliminates the need for a reference run on power-up, reducing cycle time in pick-and-place or rotary indexing applications. The motor body carries IP65 protection, the shaft bushing is IP65, and the housing is IP67 per IEC 60034-5. Cooling is natural convection — no integrated fan. The thermal budget depends on the mounting surface (flange-to-machine thermal conductivity) and ambient temperature. The winding temperature limit is 130°C (copper hot), which sets the thermal protection threshold in the drive. ## Mechanical interface and shaft loading The motor mounts on an international standard flange with a 70 mm pilot diameter and 2.5 mm centring collar depth. The shaft is 11 mm diameter with a parallel key (4 mm key width) and 23 mm shaft length — standard for coupling to a gearhead or pulley via a keyed hub. Maximum radial force on the shaft is derated with speed: 710 N at 1000 rpm down to 390 N at 6000 rpm. Maximum axial force is 80 N. These limits govern belt tension or direct-coupling overhung loads — exceeding them shortens bearing life. The electrical connection offers both a straight connector and a rotatable right-angled connector — the right-angle option saves space in shallow enclosures or cable trays where the motor is mounted close to a panel wall. ## Electrical parameters for drive sizing Stator resistance is 16.4 Ω and stator inductance is 41.55 mH — the high inductance limits current ripple, allowing a lower PWM frequency from the drive without excessive ripple heating. The torque constant is 1.36 Nm/A at 120°C winding temperature, and the back EMF constant is 95.9 V/krpm at 20°C. These constants let the drive's current loop and velocity loop calculate the correct voltage and current commands. The motor is three-phase, with continuous stall current of 1.5 A and maximum RMS current of 6.0 A. The drive must supply at least 6.0 A peak to utilise the full peak torque. Nominal output power varies with supply: 340 W at 230 V single-phase, 660 W at 400 V three-phase, and 780 W at 480 V three-phase.","metaTitle":"Schneider Electric SH30702M12A2200 Servo Motor, 640 W","metaDescription":"Schneider Electric SH30702M12A2200 servo motor, 640 W continuous power, 2.2 Nm nominal torque, absolute multiturn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"7.4 in (187 mm)","Inertia":"0.0 kg.cm² of brake 0.41 kg.cm² of motor","Key width":"0.2 in (4 mm)","Shaft end":"Parallel key","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.41 kg.cm²","Nominal torque":"19.5 lbf.in (2.2 N.m) 115 V single phase 19.03 lbf.in (2.15 N.m) 230 V single phase 17.97 lbf.in (2.03 N.m) 400 V three phase 17.97 lbf.in (2.03 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"1.36 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"640 W","Mounting Support":"International standard flange","Sizing reference":"SH30702M","Back emf constant":"95.9 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"41.55 mH","Stator resistance":"16.4 Ohm","Maximum current Irms":"6.0 A","Nominal output power":"700 W 115 V single phase 340 W 230 V single phase 660 W 400 V three phase 780 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Output current 3s peak":"6.0 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.5 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/d39618c7a12e3952155eb3e975a4c21d.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH30702M12A2200/sh3-servomotor-70mm-2-stacks-high-torque-keyed-shaft-sincos-multiturn-128-no-brake-angular-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702M12A2200/alternatives.json"},"ai":{"faq":[{"question":"Where can I buy SH30702M12A2200 and get a price?","answer":"The SH30702M12A2200 is sourced to order through independent distribution. Submit an RFQ for current pricing and availability — the quote is confirmed against your BOM quantity."},{"question":"What is the phase configuration of SH30702M12A2200?","answer":"The motor is three-phase, but it also operates on single-phase supplies at reduced speed and torque — 750 rpm at 115 V single-phase and 1500 rpm at 230 V single-phase."},{"question":"What is the overall length of SH30702M12A2200?","answer":"The overall body length is 7.4 inches (187 mm), not including the shaft extension or connector."},{"question":"What compliance documentation does Schneider Electric provide for SH30702M12A2200?","answer":"The motor carries IP65/IP67 protection per IEC 60034-5. Compliance documentation (RoHS, REACH, UL, IEC) is available from Schneider Electric upon request — the datasheet and declaration of conformity cover the applicable standards."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702M12A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702M12A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}