{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702M12F1100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702M12F1100","canonicalUrl":"https://aoctrl.com/schneider/SH30702M12F1100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702M12F1100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 servo motor with brake, SH30702M12F1100, three-phase, 640 W continuous, IP65, absolute multiturn SinCos Hiperface encoder, 70 mm flange.","salesMarkdown":"## Three-phase SH3 with holding brake — 640 W continuous, IP65 sealed The SH30702M12F1100 is a three-phase servo motor from the SH3 family, delivering 640 W continuous power with natural convection cooling — no external fan needed, which simplifies cabling and reduces failure points in the cell. It carries a holding brake rated at 3 N.m (26.6 lbf.in), holding the load on power-down without a separate mechanical lock. The nominal torque varies by supply: 2.2 N.m at 115 V single-phase, 2.15 N.m at 230 V single-phase, and 2.03 N.m at 400 V or 480 V three-phase. The IP65 rating applies to both the motor body and the shaft bushing per IEC 60034-5 — the motor withstands washdown, but the rotatable right-angled or straight connector must be fully mated to preserve the seal. ## Speed range and feedback — matching the drive and the cycle Nominal speed depends on the supply: 750 rpm at 115 V single-phase, 1500 rpm at 230 V single-phase, 3000 rpm at 400 V three-phase, and 3600 rpm at 480 V three-phase. Maximum mechanical speed is 8000 rpm — the winding configuration, not the bearings, sets the ceiling. The absolute multiturn SinCos Hiperface encoder provides position feedback on power-up without a homing cycle — critical for applications where the axis must resume from the last known position after a power loss. The drive must support the Hiperface protocol; verify compatibility with the Lexium or third-party drive before committing the BOM. ## Mounting and mechanical interface — 70 mm flange, parallel key shaft The motor mounts on an international standard flange with a 70 mm (2.8 in) flange size and a 60 mm centring collar. Four mounting holes at 5.5 mm diameter on the flange face — the bolt pattern matches standard 70 mm frame servo mounts. The shaft is 11 mm diameter with a parallel key, 23 mm shaft length, and 4 mm key width. Maximum radial force is 710 N at 1000 rpm, derating to 390 N at 6000 rpm. Maximum axial force is 80 N — the bearing set is sized for belt-drive loads, not direct axial thrust. Overall length is 212.5 mm (8.4 in). The electrical connection uses a rotatable right-angled connector or a straight connector — the rotatable version helps route the power/feedback cable in tight cabinets without bending the cable below its minimum radius. ## Electrical parameters — stall current, inductance, and drive sizing Continuous stall current is 1.5 A, while the maximum current (Irms) is 6 A — the drive must supply the 4× peak for acceleration transients. Stator resistance is 16.4 Ω and inductance is 115.7 mH, giving a relatively high electrical time constant that influences current-loop tuning. Peak stall torque reaches 7.6 N.m (67.3 lbf.in) across the 115–480 V three-phase range — this is the torque available for short-duration acceleration. Continuous stall torque is 2.04 N.m (18.06 lbf.in) across the same voltage range. The motor has 3 pole pairs. Temperature class is 130 °C (266 °F) copper hot — the winding insulation class F or B is implied by the 130 °C limit, but the natural convection cooling means the drive's current limit must respect the thermal model to avoid demagnetisation at low speed. ## Lifecycle and sourcing — current production, quoted to order Sourced through independent distribution against an RFQ. The sizing reference is SH30702M, which is the base motor variant without connector or brake options.","metaTitle":"Schneider Electric SH30702M12F1100 Servo Motor with Brake","metaDescription":"Schneider Electric SH30702M12F1100 SH3 servo motor with brake, 640 W continuous, 3-phase, IP65, absolute multiturn Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.4 in (212.5 mm)","Key width":"0.2 in (4 mm)","Shaft end":"Parallel key","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.482 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"19.5 lbf.in (2.2 N.m) 115 V single phase 19.03 lbf.in (2.15 N.m) 230 V single phase 17.97 lbf.in (2.03 N.m) 400 V three phase 17.97 lbf.in (2.03 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"1.36 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"640 W","Mounting Support":"International standard flange","Sizing reference":"SH30702M","Back emf constant":"95.9 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"115.7 mH","Stator resistance":"16.4 Ohm","Maximum current Irms":"6 A","Nominal output power":"700 W 115 V single phase 340 W 230 V single phase 660 W 400 V three phase 780 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.5 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/6ba530e7c069b8ec558f0bd26049ee9a.pdf","sourceUrl":"https://www.se.com/ca/en/product/SH30702M12F1100/sh3-servomotor-70mm-2-stacks-high-torque-keyed-shaft-sincos-multiturn-128-brake-straight-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702M12F1100/alternatives.json"},"ai":{"faq":[{"question":"What encoder type does the SH30702M12F1100 use?","answer":"It uses an absolute multiturn SinCos Hiperface encoder — the drive must support the Hiperface protocol for position feedback."},{"question":"What is the holding torque of the brake on this motor?","answer":"The holding brake is rated at 3 N.m (26.6 lbf.in), sufficient to hold the load stationary when power is removed."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702M12F1100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702M12F1100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}