{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702M12F2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702M12F2100","canonicalUrl":"https://aoctrl.com/schneider/SH30702M12F2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702M12F2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 servo motor with brake, SH30702M12F2100, 700 W nominal output at 400 V three-phase, 3000 rpm, absolute multiturn SinCos Hiperface encoder, IP65, 3 N.m holding brake, 70 mm flange.","salesMarkdown":"## Speed and torque across supply voltages The SH30702M12F2100 delivers 3000 rpm at 400 V three-phase input, with a maximum mechanical speed of 8000 rpm. At 480 V three-phase it reaches 3600 rpm; on single-phase 115 V it runs 750 rpm, and on 230 V single-phase it runs 1500 rpm. This speed flexibility lets the same motor frame serve machines wired for different mains voltages without a motor change — the drive parameter set handles the speed scaling. Nominal torque is 2.2 N.m at 115 V single-phase, dropping slightly to 2.03 N.m at 400 V and 480 V three-phase. Continuous stall torque across the 115–480 V three-phase range is 2.04 N.m. The holding brake delivers 3 N.m — enough to hold a vertical-axis load at rest without the drive holding current. Peak stall torque reaches 7.6 N.m across the 115–480 V three-phase range, giving a 3.7× torque margin over continuous for acceleration through rapid moves or breaking free of a stuck load. ## Encoder, feedback, and position loop The absolute multiturn SinCos Hiperface encoder provides position feedback without a home cycle on power-up — the rotor position is known from the moment the drive enables. This eliminates the homing sequence on every power cycle, saving 2–5 seconds per cycle on multi-axis machines. The back EMF constant is 95.9 V/krpm at 20 °C, and the torque constant is 1.36 N.m/A at 120 °C hot copper. These numbers let the drive calculate the actual motor temperature from the back EMF measurement during idle, enabling thermal model protection without an external thermistor. ## Mechanical integration and environmental sealing The motor mounts on an international standard 70 mm flange with a 60 mm centring collar and 5.5 mm mounting holes. Overall length is 212.5 mm, shaft diameter 11 mm with a parallel key and 23 mm shaft length. The IP65 rating on both the motor body and shaft bushing means it withstands washdown — suitable for food processing or packaging lines where hose-down cleaning is routine. Cooling is natural convection — no fan or forced air required. The maximum radial force at 3000 rpm is 490 N, and maximum axial force is 80 N. These limits define the allowable belt tension or direct-coupling misalignment before bearing life degrades. ## Electrical parameters and winding data Stator resistance is 16.4 Ω and inductance is 115.7 mH — a relatively high-inductance winding that limits current ripple at moderate PWM frequencies. Continuous stall current is 1.5 A, and maximum RMS current is 6 A. The 3-pole motor runs on three-phase supplies; the single-phase ratings reflect operation on a drive with a single-phase input rectifier.","metaTitle":"Schneider Electric SH30702M12F2100 Servo Motor with Brake","metaDescription":"Schneider Electric SH30702M12F2100 servo motor with holding brake, 700 W nominal output at 400 V three-phase, 3000 rpm, absolute multiturn SinCos Hiperface","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.4 in (212.5 mm)","Key width":"0.2 in (4 mm)","Shaft end":"Parallel key","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"0.482 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"19.5 lbf.in (2.2 N.m) 115 V single phase 19.03 lbf.in (2.15 N.m) 230 V single phase 17.97 lbf.in (2.03 N.m) 400 V three phase 17.97 lbf.in (2.03 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"1.36 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"640 W","Mounting Support":"International standard flange","Sizing reference":"SH30702M","Back emf constant":"95.9 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"115.7 mH","Stator resistance":"16.4 Ohm","Maximum current Irms":"6 A","Nominal output power":"700 W 115 V single phase 340 W 230 V single phase 660 W 400 V three phase 780 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"80 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"1.5 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/60f532243069f202469c222fe7c5973f.pdf","sourceUrl":"https://www.se.com/vn/en/product/SH30702M12F2100/sh3-servomotor-70mm-2-stacks-high-torque-keyed-shaft-sincos-multiturn-128-brake-angular-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702M12F2100/alternatives.json"},"ai":{"faq":[{"question":"What is the closest alternative to SH30702M12F2100 in the SH3 family?","answer":"The sizing reference is SH30702M, which covers the 70 mm flange, 640 W continuous power class. Within the SH3 family, the main differentiator is the encoder type and brake option — this variant carries the absolute multiturn SinCos Hiperface encoder and holding brake. A variant without the brake or with a different encoder feedback would be a different order code within the same SH30702M frame size."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702M12F2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702M12F2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}