{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702P01F2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702P01F2100","canonicalUrl":"https://aoctrl.com/schneider/SH30702P01F2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702P01F2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30702P01F2100 SH3 series servo motor with holding brake, 70 mm flange, smooth shaft, IP65, absolute single-turn SinCos Hiperface encoder, 3 Nm holding torque.","salesMarkdown":"The SH30702P01F2100 is a 70 mm flange servo motor from the Schneider SH3 family, built with an integral holding brake and an absolute single-turn SinCos Hiperface encoder. The brake holds 3 N.m (26.6 lbf.in) at standstill — enough to lock a vertical axis load without a separate mechanical brake, though the holding torque is the static rating, not a dynamic stopping torque. Rated for three-phase supply, the motor's nominal speed and output power shift with the line voltage: 6000 rpm at 400 V three-phase delivering 1190 W, and 7200 rpm at 480 V three-phase delivering 1360 W. On single-phase 230 V it runs 3000 rpm at 660 W. That voltage-dependent speed range means the same motor covers both 400 V and 480 V lines without a winding change — just a parameter adjustment in the drive. ## Encoder, brake, and shaft — interface decisions for the cell The absolute single-turn SinCos Hiperface encoder reports position on power-up without a homing move — critical for a vertical axis that must not drift on restart. The smooth shaft (no keyway) means the load coupling relies on a clamping hub; confirm the hub bore matches the 11 mm shaft diameter and 23 mm shaft length before specifying the coupling. ## IP65 and natural convection — mounting constraints IP65 per IEC 60034-5 on both the motor body and the shaft bushing means the motor withstands hose-down and dust ingress — suitable for food processing or washdown zones. The cooling is natural convection (no external fan), so the continuous torque and power ratings assume free airflow around the 70 mm flange; mounting in a confined pocket or against a heat source derates the available torque. Electrical connection is via a straight connector (standard) or a rotatable right-angled connector — the right-angle option helps in tight cable trays where the straight connector would exceed the clearance envelope. The motor mounts on an international standard flange with a 60 mm centring collar and 5.5 mm mounting holes on the 70 mm bolt circle. ## Torque and thermal limits across the speed range Continuous stall torque is 2.04 N.m (18.06 lbf.in) across the 115–480 V three-phase range, with a peak stall torque of 7.6 N.m (67.3 lbf.in) — about 3.7× the continuous rating, usable for short acceleration bursts. The torque constant is 0.7 N.m/A at 120 °C copper temperature, and the maximum current Irms is 11.8 A (same as the 3 s peak current). Maximum radial force drops with speed: 710 N at 1000 rpm down to 390 N at 6000 rpm. For a belt-drive or direct-coupled load, that radial limit sets the maximum belt tension or overhung load at the operating speed. Maximum axial force is 80 N — a helical-gear or thrust load above that will overload the bearing.","metaTitle":"Schneider Electric SH30702P01F2100 Servo Motor with Brake","metaDescription":"Schneider Electric SH30702P01F2100 servo motor with brake, 70mm flange, IP65, 3 Nm holding torque, absolute single-turn encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30702P01F2100","Length":"8.4 in (212.5 mm)","Inertia":"0.11 kg.cm² of brake 0.0 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 70mm, 2 stacks, smooth Shaft, SinCos Singleturn 128, Brake, angular, IP65/65","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"1500 rpm 115 V single phase 3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.482 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"19.03 lbf.in (2.15 N.m) 115 V single phase 18.6 lbf.in (2.1 N.m) 230 V single phase 15.9 lbf.in (1.8 N.m) 400 V three phase 15.9 lbf.in (1.8 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.7 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1130 W","Mounting Support":"International standard flange","Sizing reference":"SH30702P","Back emf constant":"48 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"29.65 mH","Stator resistance":"4.2 Ohm","Maximum current Irms":"11.8 A","Nominal output power":"340 W 115 V single phase 660 W 230 V single phase 1190 W 400 V three phase 1360 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"80 N","Output current 3s peak":"11.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.9 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/296dca7a7e27861cba1b73a181be20f1.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30702P01F2100/sh3-servomotor-70mm-2-stacks-smooth-shaft-sincos-singleturn-128-brake-angular-ip65-65/"},"ai":{"faq":[{"question":"What is the holding torque of the brake on SH30702P01F2100?","answer":"The integral holding brake delivers 3 N.m (26.6 lbf.in) static holding torque. This is a holding brake, not a dynamic stopping brake — it locks the rotor at standstill."},{"question":"What encoder type does SH30702P01F2100 use?","answer":"It uses an absolute single-turn SinCos Hiperface encoder. The single-turn absolute feedback provides position on power-up without a homing sequence, and the SinCos analog track gives high-resolution interpolation for the drive."},{"question":"What IP rating does SH30702P01F2100 have?","answer":"IP65 per IEC 60034-5 on both the motor body and the shaft bushing. Suitable for washdown and dusty environments, provided the mating connector is also IP65-rated."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702P01F2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702P01F2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}