{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702P02A1100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702P02A1100","canonicalUrl":"https://aoctrl.com/schneider/SH30702P02A1100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702P02A1100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30702P02A1100, three-phase, 1130 W continuous power, IP65, absolute multiturn SinCos Hiperface encoder, smooth shaft without brake.","salesMarkdown":"## What this SH3 servo motor delivers on the line The SH30702P02A1100 is a three-phase servo motor from Schneider Electric's SH3 family, rated for 1130 W continuous power with a continuous stall torque of 2.04 N.m across the 115...480 V three-phase range. Nominal speed and torque depend on the supply voltage: at 115 V single phase you get 1500 rpm and 2.15 N.m; at 400 V three phase it's 6000 rpm and 1.8 N.m; at 480 V three phase it reaches 7200 rpm at the same 1.8 N.m. The absolute multiturn SinCos Hiperface encoder gives you position feedback without needing a home cycle after power loss — the drive knows where the shaft is on startup. ## Mounting and mechanical fit — what to check before bolting it in Flange size is 70 mm (2.8 in) with an international standard flange pattern — it fits the common servo mounts in this power class. Centring collar diameter is 60 mm with a 2.5 mm depth; mounting holes are 5.5 mm diameter on the bolt circle. Smooth shaft, 11 mm diameter by 23 mm long — no keyway, so the coupling or pulley must transmit torque through a clamping or friction fit. No holding brake fitted, so for vertical-axis loads you'll need an external brake or a motor with the brake option. Maximum radial force at the shaft nose drops with speed: 710 N at 1000 rpm, down to 390 N at 6000 rpm. Maximum axial force is 80 N. Stay inside these limits to avoid bearing damage at high-speed runs. ## Electrical and thermal — the numbers that set the drive tuning Stator resistance is 4.2 Ohm and inductance is 10.65 mH — these set the electrical time constant and influence the current-loop tuning in the servo drive. Torque constant is 0.7 N.m/A at 120 °C copper temperature; back EMF constant is 48 V/krpm at 20 °C. Continuous stall current is 2.9 A; peak current (3 s) is 11.8 A. The drive needs to supply that peak for acceleration and deceleration without tripping on overcurrent. Cooling is natural convection — no fan, so the motor relies on the mounting surface and ambient airflow for heat rejection. IP65 rating on both the motor body and the shaft bushing means it handles washdown environments as long as the connector is properly mated. ## Cabling and connectors — two options for the panel layout The motor accepts either a rotatable right-angled connector or a straight connector — choose based on cable exit direction in your cabinet. The connector is part of the motor assembly, not a separate order item.","metaTitle":"Schneider Electric SH30702P02A1100 Servo Motor, 1130 W","metaDescription":"Schneider Electric SH30702P02A1100 SH3 servo motor, 1130 W continuous power, three-phase, IP65, absolute multiturn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30702P02A1100","Length":"7.4 in (187 mm)","Inertia":"0.0 kg.cm² of brake 0.41 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 70mm, 2 stacks, smooth Shaft, SinCos Multiturn 128, no Brake, straight, IP65/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"Without","Nominal speed":"1500 rpm 115 V single phase 3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.41 kg.cm²","Nominal torque":"19.03 lbf.in (2.15 N.m) 115 V single phase 18.6 lbf.in (2.1 N.m) 230 V single phase 15.9 lbf.in (1.8 N.m) 400 V three phase 15.9 lbf.in (1.8 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.7 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1130 W","Mounting Support":"International standard flange","Sizing reference":"SH30702P","Back emf constant":"48 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"10.65 mH","Stator resistance":"4.2 Ohm","Maximum current Irms":"11.8 A","Nominal output power":"340 W 115 V single phase 660 W 230 V single phase 1190 W 400 V three phase 1360 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"80 N","Output current 3s peak":"11.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.9 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/d07c40bbd78ba688f5943ce1b9af26ff.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30702P02A1100/sh3-servomotor-70mm-2-stacks-smooth-shaft-sincos-multiturn-128-no-brake-straight-ip65-65/"},"ai":{"faq":[{"question":"What encoder type does this motor use?","answer":"It uses an absolute multiturn SinCos Hiperface encoder. This gives you position feedback over multiple revolutions without needing a homing routine after power-up, as long as the drive supports the Hiperface protocol."},{"question":"Does this motor have a holding brake?","answer":"No — the holding brake is listed as 'without'. For vertical loads or applications that need to hold position with power off, you'll need an external brake or a different motor variant with the brake option."},{"question":"What is the IP rating of the SH30702P02A1100?","answer":"IP65 for both the motor body and the shaft bushing, conforming to IEC 60034-5. That means it's protected against dust ingress and low-pressure water jets — suitable for washdown environments in food, beverage, or general industrial areas."},{"question":"Where can I buy SH30702P02A1100 and get a price?","answer":"This motor is sourced to order through independent distribution."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702P02A1100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702P02A1100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}