{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702P02F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702P02F2200","canonicalUrl":"https://aoctrl.com/schneider/SH30702P02F2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702P02F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30702P02F2200 SH3 servo motor with holding brake, 1130 W continuous power, 70 mm flange, smooth shaft, absolute multiturn SinCos Hiperface encoder, IP65/IP67.","salesMarkdown":"## 1130 W servo motor with integral holding brake The SH30702P02F2200 is a Schneider Electric SH3 series servo motor delivering 1130 W continuous power from a 70 mm flange frame. It includes a holding brake rated at 3 N.m (26.6 lbf.in) — this brake holds the load at rest with the drive disabled, so the axis does not drift when power is removed. The brake is integral to the motor; no external brake resistor or separate brake coil wiring is needed. The motor is three-phase and its nominal speed depends on the supply voltage: 1500 rpm on 115 V single-phase, 3000 rpm on 230 V single-phase, 6000 rpm on 400 V three-phase, and 7200 rpm on 480 V three-phase. This means the same motor covers both low-voltage single-phase and high-voltage three-phase lines — the speed range is set by the drive parameterisation, not a motor rewind. The absolute multiturn SinCos Hiperface encoder reports position over multiple shaft revolutions without needing a home cycle on power-up. This is the deciding factor for a gantry or rotary table that must resume position after a power loss — no reference run, no lost counts. ## IP65/IP67 enclosure and natural convection cooling The motor body carries IP65 per IEC 60034-5, the shaft bushing is also IP65, and the housing is rated IP67. This means the motor withstands hose-down cleaning and temporary submersion — it fits food-and-bev, washdown, or outdoor conveyor lines where a standard IP20 servo would fail from moisture ingress. The IP67 rating on the housing, not just the connector, is the key: the housing seal is the wet-end barrier. Cooling is by natural convection — no external fan or forced air. The continuous torque and power ratings assume free air movement around the flange and housing. If the motor is enclosed in a tight cabinet or mounted with restricted airflow, the continuous stall torque of 2.04 N.m (18.06 lbf.in) across 115-480 V three-phase must be derated. The copper hot-spot temperature limit is 130 °C (266 °F). The torque constant is 0.7 N.m/A at 120 °C (248 °F) — this is the hot torque constant, not the cold value. A drive tuning that uses the cold constant will under-estimate the current needed to hold torque at operating temperature. The back EMF constant is 48 V/krpm at 20 °C (68 °F). ## Mounting and mechanical interface — 70 mm flange, smooth shaft The motor mounts via an international standard flange with a 70 mm (2.8 in) flange size. The centring collar is 60 mm diameter with a 2.5 mm depth. Four mounting holes of 5.5 mm diameter on the flange face — these match the standard 70 mm frame pattern used across the SH3 family. The smooth shaft is 11 mm diameter with a 23 mm shaft length. No keyway or flat — the load coupling must use a clamping or friction-fit method. ## Electrical connection and winding data The motor comes with both a straight connector and a rotatable right-angled connector. The right-angled connector can be rotated to route the cable out of the way in tight panel layouts — useful when the motor is mounted close to a wall or another axis. The stator resistance is 4.2 Ohm and the stator inductance is 29.65 mH. These values set the electrical time constant and the drive's current-loop tuning. The motor has 3 poles. Maximum continuous current Irms is 11.8 A, and the output current 3-second peak is also 11.8 A. The peak stall torque is 7.6 N.m (67.3 lbf.in) across 115-480 V three-phase. Nominal torque varies by supply: 2.15 N.m at 115 V single-phase, 2.1 N.m at 230 V single-phase, and 1.8 N.m at both 400 V and 480 V three-phase. Nominal output power follows the same pattern: 340 W at 115 V, 660 W at 230 V, 1190 W at 400 V, and 1360 W at 480 V. The motor carries IP65/IP67 ratings conforming to IEC 60034-5. Compliance documentation (RoHS, REACH, UL, IEC) is provided by Schneider Electric with the shipment — request it with the RFQ if needed for your compliance file.","metaTitle":"Schneider Electric SH30702P02F2200 Servo Motor with Brake","metaDescription":"Schneider Electric SH30702P02F2200 servo motor with brake, 1130 W continuous power, IP65/IP67, absolute multiturn encoder. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30702P02F2200","Length":"8.4 in (212.5 mm)","Inertia":"0.11 kg.cm² of brake 0.0 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 70mm, 2 stacks, smooth Shaft, SinCos Multiturn 128, Brake, angular, IP65/67","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"1500 rpm 115 V single phase 3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.482 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"19.03 lbf.in (2.15 N.m) 115 V single phase 18.6 lbf.in (2.1 N.m) 230 V single phase 15.9 lbf.in (1.8 N.m) 400 V three phase 15.9 lbf.in (1.8 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.7 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1130 W","Mounting Support":"International standard flange","Sizing reference":"SH30702P","Back emf constant":"48 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"29.65 mH","Stator resistance":"4.2 Ohm","Maximum current Irms":"11.8 A","Nominal output power":"340 W 115 V single phase 660 W 230 V single phase 1190 W 400 V three phase 1360 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"80 N","Output current 3s peak":"11.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.9 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/0a6a7fea3b6bf50da33c1ce237589770.pdf","sourceUrl":"https://www.se.com/be/en/product/SH30702P02F2200/sh3-servomotor-70mm-2-stacks-smooth-shaft-sincos-multiturn-128-brake-angular-ip65-67/"},"ai":{"faq":[{"question":"What is the holding torque of the brake on the SH30702P02F2200?","answer":"The holding brake is rated at 3 N.m (26.6 lbf.in). This holds the load at rest when the drive is disabled — sufficient for vertical axes or any application where the load must not drift under gravity."},{"question":"What IP rating does the SH30702P02F2200 servo motor have?","answer":"The motor body is IP65, the shaft bushing is IP65, and the housing is IP67, all conforming to IEC 60034-5. The IP67 housing rating means it withstands temporary submersion — suitable for washdown environments."},{"question":"What encoder type is on the SH30702P02F2200?","answer":"It uses an absolute multiturn SinCos Hiperface encoder. This encoder reports absolute position over multiple revolutions without a homing cycle on power-up."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702P02F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702P02F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}