{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702P0AA4100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702P0AA4100","canonicalUrl":"https://aoctrl.com/schneider/SH30702P0AA4100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702P0AA4100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 servo motor, SH30702P0AA4100, 1130 W continuous power, 3000 rpm nominal speed at 230 V single phase, absolute single-turn Hiperface DSL encoder, IP65, smooth shaft, without brake.","salesMarkdown":"## Power and torque across supply voltages The SH30702P0AA4100: Rated continuous output power is 1130 W at 400 V or 480 V three-phase, dropping to 610 W on 230 V single-phase supply. Nominal torque follows the same pattern: 2.1 N.m at 230 V single phase, 1.8 N.m at 400 V or 480 V three phase. Peak stall torque reaches 7.6 N.m across the 115...480 V three-phase range — this is the short-duration overload ceiling for acceleration or emergency stops. Continuous stall torque is 2.04 N.m at 115...480 V three phase, with a continuous stall current of 2.9 A. ## Speed range and encoder feedback Nominal speed depends on the supply: 3000 rpm on 230 V single phase, 6000 rpm on 400 V three phase, and 7200 rpm on 480 V three phase. Feedback comes from an absolute single-turn Hiperface DSL encoder — no battery-backed multi-turn count, but the single-turn position is known at power-up without a homing move. The torque constant is 0.7 N.m/A at 120 °C copper temperature; the back EMF constant is 48 V/krpm at 20 °C. ## Mechanical fit and environmental sealing Mounts on an international standard flange with a 70 mm flange size and 60 mm centring collar diameter. The shaft is smooth, 11 mm diameter, 23 mm shaft length — no keyway, so the coupling must clamp directly. Overall body length is 187 mm (7.4 in). Maximum radial force at 1000 rpm is 990 N; maximum axial force is 160 N. IP65 rating applies to both the motor body and the shaft bushing per IEC 60034-5 — suitable for washdown areas where hose spray hits the motor housing and the seal face. Cooling is by natural convection — no external fan or forced air required, but the thermal budget depends on the mounting surface and ambient air movement. ## Electrical connections and winding data The power and feedback connections use a straight connector plus a quick-lock rotatable right-angled connector — the rotatable connector helps route cables in tight cabinets. Stator resistance is 4.2 Ohm; stator inductance is 10.65 mH. Maximum RMS current is 11.8 A, with a 3-second peak output current also rated at 11.8 A. The motor has 3 pole pairs. Rated hot-spot copper temperature is 130 °C.","metaTitle":"Schneider Electric SH30702P0AA4100 Servo Motor, 1130 W","metaDescription":"Schneider Electric SH30702P0AA4100 servo motor, 1130 W continuous power, 3000 rpm nominal speed, absolute single-turn Hiperface DSL encoder, IP65, smooth shaft.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30702P0AA4100","Length":"7.4 in (187 mm)","Inertia":"0.0 kg.cm² of brake 0.41 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 70mm, 2 stacks, smooth Shaft, Singleturn DSL 18bit, no Brake, OneMotorCable angular M23, IP65/65","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"0.9 in (23 mm)","Holding brake":"Without","Nominal speed":"3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.410 kg.cm²","Nominal torque":"18.6 lbf.in (2.1 N.m) 230 V single phase 15.9 lbf.in (1.8 N.m) 400 V three phase 15.9 lbf.in (1.8 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.7 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1130 W","Mounting Support":"International standard flange","Sizing reference":"SH30702P","Back emf constant":"48 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"10.65 mH","Stator resistance":"4.2 Ohm","Maximum current Irms":"11.8 A","Nominal output power":"610 W 230 V single phase 1130 W 400 V three phase 1130 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"quicklock rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"3.0","Maximum axial force Fa":"160 N","Output current 3s peak":"11.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"990 N 1000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.9 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,319.22","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/8da51a4908b7da6c3005f6ea7c56aa70.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30702P0AA4100/sh3-servomotor-70mm-2-stacks-smooth-shaft-singleturn-dsl-18bit-no-brake-onemotorcable-angular-m23-ip65-65/"},"ai":{"faq":[{"question":"What is the nominal power rating of SH30702P0AA4100?","answer":"Continuous output power is 1130 W at 400 V or 480 V three-phase supply, and 610 W on 230 V single-phase supply."},{"question":"What encoder type does this motor use?","answer":"It uses an absolute single-turn Hiperface DSL encoder, which provides position at power-up without requiring a homing cycle."},{"question":"What is the IP rating of SH30702P0AA4100?","answer":"IP65 per IEC 60034-5 for both the motor body and the shaft bushing, making it suitable for washdown environments."},{"question":"Does SH30702P0AA4100 include a holding brake?","answer":"No, this variant is specified without a holding brake."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702P0AA4100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702P0AA4100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}