{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702P0AF3000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702P0AF3000","canonicalUrl":"https://aoctrl.com/schneider/SH30702P0AF3000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702P0AF3000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH30702P0AF3000 SH3 servo motor, three-phase, 1130 W continuous power, 3000 rpm nominal speed, absolute single-turn Hiperface DSL encoder, holding brake, IP65, smooth shaft.","salesMarkdown":"## Motor ratings across supply voltages The SH30702P0AF3000 delivers 1130 W continuous power on a three-phase 400 V or 480 V supply, dropping to 610 W on 230 V single-phase. Nominal speed reaches 3000 rpm at 230 V, 6000 rpm at 400 V, and 7200 rpm at 480 V — the speed ceiling follows the supply voltage, so the application's bus voltage sets the top end of the velocity loop. Nominal torque is 2.1 N·m on 230 V single-phase, derating to 1.8 N·m on three-phase supplies. The holding brake delivers 3 N·m holding torque, enough to secure a vertical axis without a counterbalance when the drive is disabled. Peak stall torque reaches 7.6 N·m across the 115–480 V three-phase range — this is the short-duration capability for acceleration and deceleration segments, not continuous duty. The continuous stall torque is 2.04 N·m at 2.9 A. ## Feedback and mechanical interface The absolute single-turn Hiperface DSL encoder provides position feedback over a digital serial link — no separate encoder cable needed; the motor power and feedback share a hybrid cable through the quick-lock straight connector. Single-turn means the absolute position is known within one revolution; multi-turn applications require a separate multi-turn encoder or homing cycle on power-up. Smooth shaft, 11 mm diameter, 23 mm length — no keyway, so the load coupling must transmit torque through a clamping or friction-fit method. The motor flange is 70 mm square with a 60 mm centring collar and 5.5 mm mounting holes, conforming to the international standard flange pattern. Overall length is 213 mm. IP65 on the motor body, but IP54 at the shaft bushing without the shaft seal ring fitted. For washdown environments, the shaft seal ring must be installed to maintain the IP65 rating at the output shaft. Natural convection cooling — no external fan, so the thermal budget depends on the motor's surface area and mounting plate heat sinking. ## Electrical parameters for drive tuning Maximum RMS current is 11.8 A — this is the peak the motor windings can sustain before thermal overload. The brake pull-in power is 7 W, typically fed from a 24 V DC supply; the brake release time and engage time affect the sequence logic in a vertical-axis application.","metaTitle":"Schneider Electric SH30702P0AF3000 Servo Motor with Brake","metaDescription":"Schneider Electric SH30702P0AF3000 SH3 servo motor, 1130 W, 3000 rpm, absolute single-turn Hiperface DSL encoder, holding brake. IP65. Quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.4 in (213 mm)","Category":"US1PC5218359","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.482 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"18.6 lbf.in (2.1 N.m) 230 V single phase 15.9 lbf.in (1.8 N.m) 400 V three phase 15.9 lbf.in (1.8 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.7 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1130 W","Mounting Support":"International standard flange","Sizing reference":"SH30702P","Back emf constant":"48 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"21.3 mH","Stator resistance":"4.2 Ohm","Brake pull-in power":"7 W","Maximum current Irms":"11.8 A","Nominal output power":"610 W 230 V single phase 1130 W 400 V three phase 1130 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"quicklock straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"160 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5","Maximum radial force Fr":"900 N 1000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.9 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/d7f449a1fe8af4ee217878e14b5c2973.pdf","sourceUrl":"https://www.se.com/us/en/product/SH30702P0AF3000/sh3-omc-motor-70mm-2-st-ip65-54-smooth-sh-dsl-single-turn-str-conn-m23-brake/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702P0AF3000/alternatives.json"},"ai":{"faq":[{"question":"What is the SH30702P0AF3000's phase and power rating?","answer":"The motor is three-phase, delivering 1130 W continuous power on 400 V or 480 V three-phase supply, and 610 W on 230 V single-phase."},{"question":"What encoder type does the SH30702P0AF3000 use?","answer":"It uses an absolute single-turn Hiperface DSL encoder, providing position feedback over a digital serial link through the motor's hybrid power/feedback cable."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702P0AF3000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702P0AF3000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}