{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30702P0AF3100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30702P0AF3100","canonicalUrl":"https://aoctrl.com/schneider/SH30702P0AF3100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30702P0AF3100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30702P0AF3100, 1130 W continuous power, 3000 rpm nominal speed, absolute single-turn Hiperface DSL encoder, with holding brake, IP65, smooth shaft, 70 mm flange.","salesMarkdown":"## Three-phase servo with integrated brake — 1130 W continuous, 3000 rpm baseline The SH30702P0AF3100 is a Schneider Electric SH3 series servo motor delivering 1130 W continuous output power at 400 V or 480 V three-phase supply, with a nominal speed of 3000 rpm under those conditions. At 230 V single-phase input, output drops to 610 W and the speed ceiling is 3000 rpm — the full 7200 rpm is only available on 480 V three-phase. It carries an integrated holding brake rated at 3 N·m holding torque and 7 W pull-in power, so the motor holds position on a vertical axis when power is removed — no external brake resistor or mechanical lock needed for the hold function. The absolute single-turn Hiperface DSL encoder provides position feedback over a digital serial link without a separate battery backup for multi-turn counts — the single-turn resolution is sufficient for applications that home on power-up or use a mechanical reference. The DSL protocol is common on Lexium 32 and 28 drives, so the motor pairs directly without an external feedback converter. The rotatable right-angled connector and quicklock straight connector let the cable exit in two orientations, simplifying routing in tight enclosures. ## Torque profile and thermal limits Continuous stall torque is 2.04 N·m across the 115–480 V three-phase range, with a continuous stall current of 2.9 A. Peak stall torque reaches 7.6 N·m — roughly 3.7× the continuous rating — for short acceleration bursts or breakaway loads. The torque constant is 0.7 N·m/A at 120 °C copper temperature, so the drive's current loop directly scales torque output. Natural convection cooling means no external fan or coolant lines — the motor sheds heat through its flange and housing. The stator resistance is 4.2 Ω and inductance 21.3 mH, giving an electrical time constant around 5 ms that the drive's current regulator must handle. Maximum axial force is 160 N, radial force 990 N at 1000 rpm — the shaft bearings are sized for direct coupling without a separate bearing support on moderate loads.","metaTitle":"Schneider SH30702P0AF3100 Servo Motor with Brake, 1130 W","metaDescription":"Schneider Electric SH30702P0AF3100 servo motor with holding brake, 1130 W continuous, 3000 rpm at 230 V single phase. Absolute single-turn Hiperface DSL","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.4 in (213 mm)","Category":"US1PC5218359","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn Hiperface DSL","Shaft length":"0.9 in (23 mm)","Holding brake":"With","Nominal speed":"3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase","Rotor inertia":"0.482 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"18.6 lbf.in (2.1 N.m) 230 V single phase 15.9 lbf.in (1.8 N.m) 400 V three phase 15.9 lbf.in (1.8 N.m) 480 V three phase","Shaft diameter":"0.4 in (11 mm)","Torque constant":"0.7 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1130 W","Mounting Support":"International standard flange","Sizing reference":"SH30702P","Back emf constant":"48 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"67.3 lbf.in (7.6 N.m) 115...480 V three phase","Stator inductance":"21.3 mH","Stator resistance":"4.2 Ohm","Brake pull-in power":"7 W","Maximum current Irms":"11.8 A","Nominal output power":"610 W 230 V single phase 1130 W 400 V three phase 1130 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"quicklock straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"3","Maximum axial force Fa":"160 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"18.06 lbf.in (2.04 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"990 N 1000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"2.9 A","Maximum mechanical speed":"8000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"262144 points/turn","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/4e377deeda20376851d8a567b2180b47.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30702P0AF3100/sh3-servomotor-70mm-2-stacks-smooth-shaft-singleturn-dsl-18bit-brake-onemotorcable-straight-m23-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH30702P0AF3100/alternatives.json"},"ai":{"faq":[{"question":"What is the SH30702P0AF3100's phase requirement?","answer":"Three-phase supply is required for the full 1130 W output at 400 V or 480 V. It also runs on 230 V single phase, but output is limited to 610 W and speed to 3000 rpm."},{"question":"What encoder type does the SH30702P0AF3100 use?","answer":"An absolute single-turn Hiperface DSL encoder. This provides position feedback over a digital serial link compatible with Lexium 32 and 28 drives without a separate feedback converter."},{"question":"What is the holding torque of the brake on the SH30702P0AF3100?","answer":"The integrated holding brake provides 3 N·m (26.6 lbf·in) holding torque with a pull-in power of 7 W. It holds the motor shaft stationary when power is removed."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30702P0AF3100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30702P0AF3100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}